My headset bluetooth disconnects my GPS bluetooth - MDA III, XDA III, PDA2k, 9090 ROM Development

When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?

I have the same problem with the original WM6 of Helmi.

I'm using the same ROM as you. Does anybody have this problem with the others ROMs?

Other roms have same problem!

HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)

slowmouse said:
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
Click to expand...
Click to collapse
No dice, I changed it from 1 to 2 and same results. It has been this way with every 6.x ROM I have flashed. Still waiting for a solution.

Bt problem
Hi !
And if we change the bluetooth broadcomm stack ? it was only an idea ....
Tamage

I also tried to increase the maxcommunications value with no success.
I haven't tried the stack software yet because in some posts, I've read that it solved the bluetooth file transfer but not our problem. Maybe I will try but I'm not confident on it.
I'm downloading the 6.1 ROM from PDAviet and will inform you in many minutes about my result.

Unfortunately, it's the same result with the 6.1ROM from PDAViet

I think that there isn't a solution for this problem...it's a limit of BT stack of BA.

No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.

syl202gas said:
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
Click to expand...
Click to collapse
Well it didn't run "perfectly"on WM2003SE. It also was a main problem on that OS too. Especially in receiving calls. The opposite site wasn't heard!

viscocesco said:
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
Click to expand...
Click to collapse
I presume you meant to say a limit of the BT hardware in the BA not the stack as the stack is software. This is a known bug in the WM5/6/6.1 ROMS, multiple connections works fine in WM2003SE but not in the hacked ROMS.

On my MDA3 it works fine, BT GPS and BT Headset together.
Have a look here.
But sound ist only working on phone, the voice/sound from navi won't come.
I tried BTAudioToggle but all I got was random noise.
Greets Rossi

syl202gas said:
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
Click to expand...
Click to collapse
Install Broadcom 1.7

Related

Pocket Bluetooth Tools and Parrot Hands free kit

Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
which parrot system do you have and what firmware
tested qtek 2020 1.66 without Bluetooth Tools
DriveBlue 3.13 o.k.
CK3000 3.13 o.k
CK3100 4.02 o.k
CK3300 4.02 o.k GPS tested with Destinator 3 :roll:
CK3500 4.02 o.k GPS tested with Destinator 3
Hi
I have ROM 1.60, the parrot worked until I installed the bluetooth tools, and now it doesn't
Cheers
JustinP
so uninstall bluetooth tools
I have unistalled the bluetoth tools, and the parrot now works, but as predicted the gps does not.
I need both of these thing working, and if they dont the device will be going back.
I cant beleive how unfinished the spv-m1000 is.
JustinP
justinp said:
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
Click to expand...
Click to collapse
same here
i deinstalled bt tools. only solution to get my parrot ck3000 v3.13 working correctly (most of the time)
regards ize|man
I do have the same problem.
But I'm not using a GPS right now and running without Bluetooth Tools. Like izeman said, this way it's working most of the time.
Currently I am planning on buying a bluetooth GPS Receiver and am pretty much interested in an solution.
So if you find one, please let us all know.
mobileprofi said:
CK3300 4.02 o.k GPS tested with Destinator 3
CK3500 4.02 o.k GPS tested with Destinator 3
Click to expand...
Click to collapse
Can you post your experience with CK3x00. How is it working with XDA II? Like CK3000 or better?
I am not able to use the latest version of BT Tools too because of the CK3000. Try the previous version. My Carkit works ok, but I dont have GPS.
Ian
IanF said:
My Carkit works ok, but I dont have GPS.
Ian
Click to expand...
Click to collapse
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Madcap Magician said:
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Click to expand...
Click to collapse
Features are limited, the caller gets echo (but that I am sure this is just an installation issue), without a mount it is impossible to dial while on the move and I still tend to plug it in to charge it while on the move (cig lighter).
Its not as good as I thought it would be and I am thinking of going for a fixed installation. This is no reflection on the kit, just the way I use it.
Hope this helps?
BT tools Plantronics, Parrot and Seefree
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Hi,
If you are using BT Tools v 1.1.0.0 (12.4.2004) it wont. You need to go back a version.
Ian
so with version 1.0.1.2 it should work? :?
PTD said:
so with version 1.0.1.2 it should work? :?
Click to expand...
Click to collapse
Works for me.
Re: BT tools Plantronics, Parrot and Seefree
I tried a previous version of BT tools... doesn't work. Any ideas? But de-installing works fine. But I can only connect one headset (BT Tools recognizes both the plantronics as the parrot as a headset and without BT Tools it can manage only one headset. But then... with BT Tools it doesn't wordk at all...)
PTD said:
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Click to expand...
Click to collapse

Toshiba bluetooth stack ROCKS...

I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
cseilern said:
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
Click to expand...
Click to collapse
So, what "ROCKS" about it?
Always do full backup b4 installing sware.
it does what the MS BT stack does (serial port, headset, activesync), but also adds other profiles (pan, dun, obex, ftp, chat + others from memory)
i.e send files/chat with other mobile phone users, access bt pan, etc... though i am only interested in pan, chat and obex
when i fisrt played with it, i immediately saw why everyone whinges with the bt stack...
it's excellent and stable for me, didn't expierence any bugs...
dutty:
Did you get pan working ?
If so can you please let me know how?
Thanks,
Martin
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
uh, just started the service, restarted the device and connected to it!
BUT, i also installed the toshiba BT stack on my workstation
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
And just more thing ... How did u manage to get that bluetooth stack to run on xda devices since it keeps checking for external SD bluetooth cards and was not designed for internal bluetooth chips ?
Look in this thread:
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
Thanks for the link ....... BUT !!
I was able to download the Toshiba BT Stack v5.01 but it won't seem to work on my xda !! Everytime I tap on Bluetooth Setting (from toshiba) It says the following ' An error occurred with the Bluetooth Card. Confirm that the card is working properly.
Both my MS Stack and Widcomm Stacks are disabled and don't conflict with this new Toshiba Stack.
I was wondering how the thread owner got this BT stack running on his xda ?
It works on my XDA Mini just fine. The only problem I'm having is that it won't stay resident when you power off the device.
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
As for disabling the MS stack, look here.
Got another Question ??
Will this new stack work on a Qtek2020 ? I've tried installing it on my Qtek2020 but it won't recognise my bluetooth hardware !!
Any sugestions ??? :?:
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
Oops, sorry, look here for info about turning off the MS BT stack.
RE
From the download link provided it showed support for WM2003. How about WM2003SE?
Anyone feedback in using on WM2003SE?
Thanks
:roll:
i think the imate jam runs se?
:roll:
RE
Sorry, another question.
In the event of a hard reset will my O2 XDA II restore the MS stack with whatever registry settings that were deleted in the process of installating the Toshiba bt stack? Will the Toshiba bt stack be totally removed in the evnet of a hard reset?
Thanks again
yes sir
Found 2 problems.
Cannot connect when call ring.. connect then call is fine.
Cannot Accept call with button on headset.
Any more Problems ???
Please post your problems ..
Hi
i´ve tested the toshiba bt software on my MDA-Compact but haven´t got very good results. First, after installation, it seems to work good with my Royaltek RBT 3000 (GPS), but after i´ve switched off the device while an active bt connection was established with my gps software, the bt-stack broks down and the whole systems seems to be unstable. Even after a softreset the bt-software from toshiba says that they didnt recognize any bt hardware.
Now i am trying to deinstall the bt-soft and can recommend everybody who wants to test to make an backup before ;-)
I think that the software from toshiba could work, when the ms-bt-stack would be completly changed with the toshiba-stack, but doesnt work without problems when both bt-stacks are on the system.
Regards
FluBeX

Best Bluetooth Stack/Drivers?

Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
bchuertas said:
Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
Click to expand...
Click to collapse
new blue tooth stack isnt out yet.
the old bsch stack works fine.. has a few bugs..
the toshiba stack and the Bluesoleil stack is very buggy
cya
Bluesoleil wasn't buggy for me when used for wireless internet. What I didn't like was its incompatibility with my headset. And I'm not willing to switch every time so I returned to MS. I'd love to use the new BCHS stack, but noone's got it right now.
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Btw2: please tell me the difference between "O2 MINI NEW BLUETOOTH STOCK" and "BT STACK(BCHS)" :lol: :lol: :lol:
Chatty said:
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Click to expand...
Click to collapse
Yes, I did copy from the Subject on other posts.
As far as I know the correct word is Stack and Stock is just misspelled
Stack applies to any Implementation of networking protocols, not just bluetooth.
http://en.wikipedia.org/wiki/Protocol_stack
You just got to love the Wikipedia!!! :wink:
BT Tools is the solution (for me at least)
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
I did not have any problems with my GPS receiver with either of the stacks. And I do know what a stack is. That's why I asked you to correct the spelling mistake.
I use Bluesoleil and am half-way happy.
Unfortunatly I cannot use MS stack because after some time it gives me the error about "please turn flight mode first", even if it is off.
Anyone know how to fix this?
Re: BT Tools is the solution (for me at least)
aleksandr said:
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
Click to expand...
Click to collapse
does this support a2dp
re
best is windcomm (broadcomm)!!!!!!
who have working version for magician?
johancz

Help: bluetooth handsfree problem.

i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
I had the same problem the only solution is to uninstall HELMI_BA_WM5_BT1.7_TEST.CAB and all the patches that go with it. I think HELMI_BA_WM5_BT1.7_TEST.CAB does not work with WM6. HELMI Please and all the experts can you look into this, I would love to use it.
Thanks
Wils
I have xplode latest ROM on my Siemens SX66 and I dont face those problems. I had updated to WM6 straight from WM2003SE
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
After installing HELMI_BA_WM5_BT1.7_TEST.CAB... you should not install helmi enable MS BT... maybe this is the problem... BT1.7 is the broadcom version and you are patching it with ms bt cab... you only install the helmi enable ms bt if you are moving back to ms bt...
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga

Request for Bluetooth WIDCOMM Stack for HD2

HI,
Can any kind soul post the cab install for the WIDCOOM stack that the HD2 s using ?
NO One ?
Anyone have the cab ? Please.....thanks.
Widcomm
yeokpd said:
Anyone have the cab ? Please.....thanks.
Click to expand...
Click to collapse
Maybe that nobody understands your question. Widcomm bluetooth stack is in every HD2 rom - each stock rom and even in the cooked roms e.g. the Artemis rom.
no cab, extract a ROM, then look into sys folder and oemdriver...
Original bluetooth stack instead of Widcomm
smaberg said:
no cab, extract a ROM, then look into sys folder and oemdriver...
Click to expand...
Click to collapse
@smaberg: I have the problem the other way: I use the HD2 with the Artemis rom and would very much like to get rid of the Widcomm bluetooth stack, because it does not work with my car. I have also a diamond (original stock rom with 6.1 and standard stack) and an old touch with an 6.5 Windows with standard stack. The original Windows bluetooth stack works with my car without any problems. Is there a way to deinstall Widcomm and to install the original Windows stack at my HD2?
+1 for removal of widcomm i have similar problem but mine connects with car sudio and works well but the stack mixes sound very bad, and you cannot control the volume level on phone. So for instance when im listening to music and fireup a navigation system the commands from the system are badly mixed in with music too loud choppy cracky etc it's pain to ears. Before on xperia (with smabergs rom ) i did not had such a problem the playback was plain and smooth.
best Regards
Another one here for a way to replace the Widcomm stack as it won't work with my igo / think outside bluetooth mouse.
The stack seems to be different than from others.
I can send bluetooth messages from my HD2 to other bluetooth clients, no problem. But the HD2 does not ".AcceptBluetoothClient()"(32feet.net) so maybe the stack is somehow broken. The stack just works in one direction
anyone got Bluetooth stack "improven"
This BT Stack is crap. I can't get this device working as other phones do.
Anyone has a solution for it?
I have a Pioneer AVH-4100 car in-dash Multimedia system + CD-BTB200 Bluetooth adapter! And i can't seem to do the following:
1- Dial numbers
2- Access phonebook
3- Voice recognition
Everything else works fine, but unfortunately the most important features doesn't..
I wish JETware was compatible with the HD2..
Any idea what to do?
thx

Categories

Resources