I have been given a vodaphone hermes and i want to use my orange sim in it. I managed to unlock the sim with software from this site and everything works great apart from no one can hear me talk in a phone call. I can hear them. Will I need to switch to a vodaphone sim or is there some orange settings that I am missing that would get voice working again.
Any help would b emuch appreciated.
Did the microphone work before you tried the other sim? Might be why it was given to you....
from what i can tell it's a common problem. Damaged USB port knocks out mic, as it thinks it has a headset still plugged in. Such a pity as it's everything I would want in a phone. I only make or receve calls ones or twice a week so bluetooth headset or usb headset would be ridiculous. I guess I will just use it as a wireless pda to replace my aging ipaq.
Related
Hy to all,
I have a question, recently I've instaled the widcomm bt stack and made a dial up conection with a t630. I've needed that coz I wanted to make the fone behave as my dialing modem, but for my contacts and I did it with the BT dialer software (it is free and it can be found on www.freewareppc.com). It works fine, I can dial a number in my contacts via bluetooth with my t630.
Now, I want my MDA II to behave like a BT handsfree for my t630 coz in that case I can either dial and speak with it over t630, and i THINK THAT IT CAN BE DONE IN SOME WAY, Coz my desctop pc acts like my handsfree over audio gateway. I want that coz I need for 2 sim cards at the same time, and just don't want to answer on two different phones
I want to do it all over my MDA.
Thanks ina advance.
Evem if you don't know the answer I would like you to comment my idea.
I think that it is a good thing that you can control a phone with your MDA, coz it is better then the dual sim adapter, coz you have both phones working at tke same time, and you control it just with one of them, The t630 can be anyware else in the 10m range, or just in your pocket.
have you tried installing the vidcomm bluetooth stack on your xda2 ?
I have it instaled.
I need that my t630 recognizes my MDA as a handsfree, like it can recognize my desctop pc as a hadsfree.
And seems that the audio gateway on the MDA is not the same thing as the one on the pc widcomm stack.
Just trying to revive an old discussion that I made, maybe someone can tell something about it...
If something isn?t clear, just say it, and I will try to explain it as better I can...
Hi All,
I have MDA compact unlocked. When i answer a call with my Motorola HS810, it works fine but only for a couple of minute. It then loses connection and I have to actually use the phone. Has any experienced this and is this a fix ffor it?
Thanks for your Help.
Yeah this is a confirmed issue that they are working to resolve. I'm going to post a response e-mail i got back from the O2 helpdesk.
They will make a ROM update available sometime....not ETA at present.
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Can anyone confirm whether this solves the problem?
Hi,
I have the iMate Jam and a Motorola HS850. I can pair up ok but the connection drops out when I make a call or receive a call simply move the earpiece away from my Jam.
It is as if my Bluetooth signal is pathetically low! :evil:
I hope they fix it soon as I am less than impressed as I can't take the Motorola back because there is nothing wrong with it.
theborg
duke911 said:
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Click to expand...
Click to collapse
Is this still working?
I have a Touch Pro and a Saab boardcomputer. After pairing these two, the connection disconnects after a few minutes (when I do not have a call).
By the way: when I have a call every five minutes (so both are active connected) the connection still active.
I can use the talk button to answer incoming calls on headset. Anybody knows a way to use that button for voice calling etc?
Hello
Just been browsing and I notice you have asked the same question as me, I did not notice it before as I searched for handsfree.
Anyway, what model do you have? I am SPV M600, I only noticed this problem today as I have just installed MP3's onto my SD card. While I had the headphones on I tried handsfree and noticed I could not activate voice dial with the button although I could answer and close calls.
On all of my old phones, I just pressed the button, it activated voice dial and I called the number, but not this phone.
I have set up voice dial on the phone, voice tagged contacts, and it is working great, none are failing to be recognised.
Have you managed to sort out the problem yet?
I called my phone supplier they could not help as they do not have a technical dept, and Orange just wont answer the phone, customer service is dreadful lately.
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Sorry I replied to the wrong thread. I dont know how to get the voice dial on the headset.
Spenner said:
Dodgy headset ??
I got my SPV M600 today and headset works fine, and the use headset selection under phone settings is greyed out as well
Click to expand...
Click to collapse
Hi Spenner.
When you say your headset works, does it activate the voice dial software when the silver button is pressed or does it just answer and close calls?
Voice Dial
I think it can be solved with a registry modification. Unfortunately I cannot solve the problem myself. I tried all the properities bu I couldnt find any related one.
My phone is O2 XDA and just like you I only can answer and hang up calls by headset button.
i was asking about how to change behaviour of this button, hovewer nobydy knows
I would like to push it 1,2,3 times or push & hold and assign different actions for different pushes
it all used to work beautifully on my Orange M600. Then I upgraded to the Dopod ROm and the voice speed dialler i gone.
Bloody annoying! Can't work out how to get it back...
Hi everybody,
I completed some tests using my bluetooth car kit (Audi integrated BT MMI car kit). Here is what I saw :
With the original french ROM (1.18.256.2)
Outgoing calls
90% of the calls were interrupted during dialing or connection. The main problem was UMTS stability with the french mobile operator named SFR. After deactivating UMTS/3G and falling back to GSM, 80% of the calls were interrupted during the first minute of communication because of BT unstability.
Incoming calls
Impossible to take a call : half were immediatly interrupted, half were answered using the internal micro instead of the BT one.
With the JasJam ROM (1.20.305.3)
Outgoing calls
After deactivating UMTS/3G support all the calls are stable. Every thing is working fine and the Audi BT car kit works just fine !
Incoming calls
Still impossible to take a call : quite all are not well handled. BT is still unusable to take calls.
I don't think the BT car kit is the problem, because I am using it every day with a Qtek 8310 (Tornado) and both incoming and outgoing calls are well handled.
If you've got some experience, please share it. I am so disapointed that this marvelous TyTN cannot replace my Tornado, only because this "merdique" (<------ french romantic word ) bluetooth functionnality is not working ! :evil:
Arnaud.
Hi Arnaud,
I too have problems - see:
http://forum.xda-developers.com/viewtopic.php?t=61594
Paul
Im also having problems with carkit.
Jasjam and kjam just dont connect with my carkit (while they pair with it) but Jasjam and all nokia / samsung phones work perfectly well with it. Even Palm treo 650 works.
Is this a problem with iMate sets or with Windows Mobile 5.0?
I've had a friend who also has a TyTN which we tried in my kit and it didn't work. It seems that users with other variants (e.g. Orange) don't have this issue?
Further (non-technical) tests have shown that if you answer or make a call, you can get the audio by going into the call menu and choosing "Turn handsfree off". My uneducated guess here is that there is some issue with the headset feature on the TyTN and by doing this, it resets the headset profile and bingo!
It is a pain in the ar$e doing this for inbound calls, but for outbound it is manageable - you simply dial the number and whilst it is connecting, do the menu->Turn handsfree off workaround. Hopefully the new ROM will fix it - when it arrives!!
Hi All,
Just to put in my experience.
I have an Audi A4 with a Gen II car kit. As there is no handset holder for the TyTn I am using the Bluetooth function.
I have the Orange SPV M3100 variant, which works absolutley fine with the Audi Bluetooth, with one problem....
As I don't yet have a car charger, when the phone goes into sleep mode, it appears to disable bluetooh (I occasionally get a 'BT OFF' signal on the car display). Switching off bluetooth, then switching on again on the phone tends to kick it back into life where it stays live for another ten minutes or so until the phone dozes off again..
I have heard of a few people who have also diagnosed the problem as possbily the phone going to sleep to conserve battery, and solved the problem with an in car charger. I will report back when I have a charger.
Again, I do not suspect the Audi car kit as I have previoulsy used this (on Bluetooth) with a Nokia 6230 and MDA Vario, with no problems at all (the Vario was externally powered from the car).
Maybe you TyTn owners can flash to the Orange ROM ;-)
Same Scenario Different Cast
I have a Lexus GS with BT.... here's my Undesired results
actually, the only Problem i am having is very annoying.
If i receive or make a call after i pair with the Car kit, EVERY Thing is fine,
The sound quality is good, the response time is good (no Delay).
BUT after that call is ended, the BT itself on the jasjam TURNS off...
so i have to turn the BT on After EVERY Single Call (either made or received)
Is this Normal, I don't think so, but i had to ask
I have the Original Ship ROM Arabic version
My BMW handsfree works just fine with my TyTN. No issues other than an occasional BT off (loss of pairing). Interestingly, it's not sleep mode related since it usually works just fine in that mode. Generally, disabling Bt then re-enabling it re-establishes the connection then all is well. I have no issues making or receiving calls.
No doubt CarKit issues will be addressed when HTC releases their ROM update. Recent information tells me that this update is pretty much guaranteed to be an AKU3.0 variant. There's a tremendous amount of BT stack improvements in this AKU that should improve this as well as A2DP bluetooth issues.
.. No issues other than an occasional BT off (loss of pairing). ..
Interesting! I have the same issue with MTeoR.. I wonder if MteoR and TyTn are based on the same HTC device PLATFORM.
Updated my Parrot CK3100 to the newest version and things still don't work too well. When I start a call on the Parrot it takes around 20 seconds to start dialing on the phone, and when I receive a call I have to pick it up, place it on hold, and retrieve from hold to be able to hear the other side.
I wonder what/why they changed in the Bluetooth stack, it worked perfectly on my Wizard...
Renault Laguna II integrated BT kit
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
rmorby said:
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
Click to expand...
Click to collapse
Try installing Jetware mobile extender, that adds signal and battery bars as well as network name.
I enabled Remote SIM Acces in the Bluetooth Menu and now my contacts sync on my Audi Bluetooth Car kit with WM 6.1.
Bought a wizard on ebay, nice refurb with all new accessories and battery for a good price...the only reason I bought it was for voip, if it scratched my right nut I could care less, all the other features are 2nd to voip for me.
It worked best with wm5 and sjphone, wm6 and it's voip capabilities are no better than any other 3rd party app I have tried.
Even with a plugged in headset there is echo, it's not a config problem it's as simple as audio feeding back from from input to output, and vice versa. I know alot about voip and setting it up, I provide hosted asterisk servers to business and do all the configs myself.
Is there a htc product that does voip properly through the ear piece?
And is blue tooth at least usable, as I understand it you need to load some audio drivers to get the best out of it?
Any advice from someone who has had success would be appreciated, I understand that fixing the ear piece problem is likely far off.
Thanks
no voice when using voip
Hi, i am new to voip (as i only recently moved from my home country), i am using it on my pc and got it configured on HTC P3600 (TRINITY). i am using VOIPRAIDER to call, my calls go smoothly and receivers can hear me but i hear nothing not even thru speaker, no outgoing ring, no voice. secondly i installed sj phone etc on PDA but don't know how to use. can someone tell me. thanks