Hi All,
I have MDA compact unlocked. When i answer a call with my Motorola HS810, it works fine but only for a couple of minute. It then loses connection and I have to actually use the phone. Has any experienced this and is this a fix ffor it?
Thanks for your Help.
Yeah this is a confirmed issue that they are working to resolve. I'm going to post a response e-mail i got back from the O2 helpdesk.
They will make a ROM update available sometime....not ETA at present.
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Can anyone confirm whether this solves the problem?
Hi,
I have the iMate Jam and a Motorola HS850. I can pair up ok but the connection drops out when I make a call or receive a call simply move the earpiece away from my Jam.
It is as if my Bluetooth signal is pathetically low! :evil:
I hope they fix it soon as I am less than impressed as I can't take the Motorola back because there is nothing wrong with it.
theborg
duke911 said:
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Click to expand...
Click to collapse
Is this still working?
I have a Touch Pro and a Saab boardcomputer. After pairing these two, the connection disconnects after a few minutes (when I do not have a call).
By the way: when I have a call every five minutes (so both are active connected) the connection still active.
Related
Hi,
i noticed everytime i turn off bluetooth (in order to spare battery time) it reactivate itself alone after a call... is this normal ? does anybody else experience this problem ?
(ps : i have pocket bluetooth tools, but i don't think that s the problem... is it??)
Thanks for any help
It is, and its not a bug, its a feature Its so you can answer a call using your bluetooth headset.
If you dont have a headset its obviously useless to you, but PBT is not under development any more, so you kind of stuck with the way it works now, or to un-install it.
Surur
Ok. i just had to read in fact the guide http://www.bluetooth.jazztel.es/guide_e.html to see that it can turn it back to off if BT is not used after 60 seconds...that s a good idea
Too pity they stopped development, it helped me a lot in the set up of the BT for activesync via BT and for set up of BT GPS...
anyway, thanks for the hint. (it gave me the idea to look a little bit further
Have a nice day!
I use PBT and I use the 60 second feature. What I found with my o2 clip bt headset is that the headset seems to lose connection to the phone after a short while regardless of the 60sec rule. Sometimes it would happen just before receiving or dialing a number.
Very annoying.
Cheers
Anthony
Hi, all.
Hope someone can assist me. I'm using an XDA II that has been upgraded to 2.06 Windows Mobile 2003 SE.
I have enabled the Bluetooth Headset profile on my Today screen and calls will transfer over to my headset (SonyEricsson HBH-65).
My question is for the following scenarios:
1) The calls transfer over but sometimes the connection becomes lost while I'm still mid-way in the call. How do I instruct the XDA to transfer the call to my Headset again? Tried pressing the button on my HBH-65 but the call doesn't transfer.
2) Sometimes, I put on my headset but forgot to turn it on. When a call comes in, I realise my mistake and answer the call on my phone first but then I ask the other party to wait while I turn on my HBH-65. After turning it on, how do I transfer the existing call to my headset?
Hope someone can help with some advice. Thanks in advance
1) I currently use BlueTrek G2 and so far has got no probs at all.
2) The BT headset has to be running before the phone in call. For the BT signal it has to be sent right b4 the phone in call.
I guess that's how you can get ur headset running.
I've got that to my best. Good luck...
No problem with them...
i am using BHB-65 too, they are great ,man, i have no problem with them from the first time using.
1. When you want to connect to the headset, there's an icon near the phone icon, you touch on that , it will indicate the term to transfer the call back the headset or cut it out.
2. When you forgot turning on the BT headset, just turn it on and press "enabled the headset" (on the desktop, remember to "view the profile" in item "Today"), it will automatically transfer the call to the BT headset.
Wish you could do that.
Hi all,
I remember seeing one post in this forum which talks about exec pairing up with my JABRA BT800 automatically during a new call ....
I searched with no gain
could you pls anyone of you point to the right thread or with info pls ?
Thanks
kasu
kasu said:
Hi all,
I remember seeing one post in this forum which talks about exec pairing up with my JABRA BT800 automatically during a new call ....
I searched with no gain
could you pls anyone of you point to the right thread or with info pls ?
Thanks
kasu
Click to expand...
Click to collapse
Come on guys....
does that mean no one using this automatic pairing ?
'm still being postive on this thread
Cheers
I would be amazed if it was true, it would be a huge bluetooth security hole if it was !!! if you can force a headset to pair with out authentication you can force anything to pair !!! are you sure you understood correctly
Don't you mean that the sound was automatically sent to the headset when a call comes in? Automatic pairing is something I have never heard of. I guess the guy paired his headset, so that when a call comes in, he hears it autmatically in his headset. Sounds more logical and feasible to me.
Why would you want to pair automatically anyway? Just pair it in the morning when you wake up, and use it all day till you switch it off. Only thing I can imagine would be battery save, but that would mean that an incoming call would have to activate both the BT on your phone and on your headset. And that is not possible, since without BT connection ( paired) no signals from the phone come to the headset.
ice_coffee -- Though I didn't see the subtle details of the mentioned software i think we'll have to pair with our BT device (proper authentication) which will be saved by the program and these details wud be used as and when incoming call comes ....
Koksie -- ur intuition is correct ....i.e. reason to do this stuff is to save battery.... bluetoooth drains exec very rapidly.....
if none of you all seen that post then i should be dreaming :!:
i'll continue my search and update the thread if i'm successful
Thanks for your inputs guys....
Cheers
Pairing is pairing but turning bluetooth on for an incoming or outgoing call is something else. PockeZenPhone has this option but it doesn't work cause it takes to long to turn on bluetooth and connect the headset before loosing your call.
Oh.. not it make sense. I think what he means is that, you had your headset and phone paired (with code and stuff). However, the headset or phone bluetooth may be off. And once there is a call coming in, it will switch on the headset/bluetooth on phone.
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
And i thought I was the only one with this issue
When i have my phone linked to my BT carkit after a call ended a) i cannot receive any other calls or b)
the BT connection is interrupted...
really annoying
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Mr_Gee said:
I did start with an application that will disconnect the BT after a call has ended and re-initilize it
would this work for you?
Click to expand...
Click to collapse
if it works for you, it would probably work for me
pls point me to it
thanx
hc4 inbox
junooni said:
hi all,
is there a programme that would keep the BT link alive?
the problem is that my BT headset connection drops after a while and i have to repair the set. the headset is virtually unusable due to this....especially during driving.
i have checked the headset elsewhere and it works perfectly. tested it with Nokia 6600, Htc prophet, samsung mobiles.
thanx
Click to expand...
Click to collapse
Yes it can be done via this small application that I've attached to my reply, basically what it does is it lets configure which folder to receive all files received via bluetooth on you storage card or phone memory as you please and it gives extra infoon bluetooth transfers like ETA and transfer rate and "IT KEEPS BLUETOOTH ALIVE at all times" so you can receive bluetooth files even when your device is not active.
You can find the original post here: http://forum.xda-developers.com/showthread.php?t=407291&highlight=hc4_inbox
Using the Touch HD with a builtin bluetooth car kit. Everything works fine, the phone's contact list displays on the screen of the car. The pairing went fine. Call history works. Happy me. But occasionally i notice after making a call via the car (after hangup) the connection disappears and i check the phone. Bluetooth is switched off!!! How can this be? Are there any settings i have missed?
Any other users experience this?
same here with my bt handsfree
what if you connect it to powersupply ?
with power : working
without power : after some minutes off
sometimes I can not access the contactlist, stop the car, remove the key, start again and it works
There is something wrong with BT + car
I've had my HD a couple of days and use it with the built in BT in my Audi. The car displayed "telephone is not connected" and when I checked the phone, no BT icon. I've had problems in the past with other makes not working very well like this and was thinking it was going to be the same here... As I was getting annoyed a call came in, rang for about half a ring on the phone then it reconnected to the car and continued ringing there, answered the call just fine.
Since then it's done the same thing twice, I'd prefer it didn't but it hasn't actually caused a problem yet.
BT shuts off by itself.
I seem to be having the same problem in my Audi Q7. It does not make a difference weather to be connected to a power supply or not.
Im having the same issue here, in my A4 Cab with integrated UHV 0420
Strange thing is, it doesnt disconnect from my works Parrott kit.
It does turn off the Bluetooth on the phone, strange. It didnt happen for the first week though.
Any ideas?
Bloke
same here. having problems with my Land Rover LR2. first week, there were no problems. now, the phone doesn't automatically connect when i start the car, i have t manually connect it by pressing the phone button on my dashboard. it then connects with no problem. however, when i try to place a call, it automatically disconnects the bluetooth.
not sure if this is a problem with the htc or my car; i have to try another phone with the car first.
Same happens in my Lamboughini and also my Mercedes- Benz E Class.
Looks like I'll just have to stick with my roller from now on!!!!
I see I'm not the only one with this problem. Soooo...... anyone got a fix?
Please, at least have you checked for a few seconds after the disconnect to see what happened ??
Well, I have a BMW S1 with in-car bluetooth. I previously owned an S200, SE K800i and a Touch Pro and never got any problems with those phones.
With HD Touch I also have the same problems like you people, but 2 or 3 seconds later the BMW regain the connection with my HD.
So, for me this is no big deal. If this only happens to me, then I'm the first to apologize my introduction on this post, if not... lol
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
yesterday i installed the hotfix from htc, but today i lost bluetooth connection again in the car. The bluetooth in the car keeps functioning, but the bluetooth on the HD has deactivated itself! With my previous sony ericsson phone (also bluetoot 2.0) i didn't have this problem. So i think it's related to the bluetoothsoftware on the HD.
bloke said:
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
Click to expand...
Click to collapse
I spoke too soon, it disconnected this morning and didnt reconnect....
Bloke
Have a look at this thread - also bluetooth problems with pairing issues - looks like BT maybe bugged
http://forum.xda-developers.com/showthread.php?t=442987&highlight=bluetooth+problems
Hello,
I have the same problem. I can not really use bluetooth in my car, because the Touch HD ends the connection after a few minutes (most times after less than five minutes).
Without a connection to the car, bluetooth will not be ended by the Touch HD, so it seems to be a problem of a connection to a bluetooth headset or a problem of a connection only to a car bluetooth "headset".
Regards
Thomas
Does this only apply to original built-in bluetooth kits and not after-market kits?
My BT-radio does not have problems with the Touch HD, but it is an after-market radio.
Same problem here. My connections drops also. I drive an Opel Zafira with builtin bluetooth carkit. Bluetooth is turned off after a while.
I've noticed when i start the car a connection is made and a few seconds later bluetooth is turned off and immediatly turned on again. After it's turned on, the connection is stable for a while. A few moments later it turns off again. Then i have turn the bluetooth connection manually.
Today i had a phone confercation for a half hour. The connection stayed stable. When i hang up the phone, the connection dropped .
Can the synchronisation of the phonebook be the problem? I had this problem with my p3600. After installing Jetware, the problem was solved. I've installed Jetware on my HD, but with no luck .
Is there a way to log the bluetooth communication. May be it tell us more
Indeed the HD bluetooth seems to be poor, I also experienced bluetooth switching off by it self when trying to pair with my Motorola S9 headphones, I have the hotfix installed, before I didn't notice this bluetooth behavior.
Also when exiting Opera the phone hangs, not always but sometimes
Anyone solved the problem yet
I send a email to HTC support. Hopefully they can help. If they answer......word goes arround that htc support sucks
still don't have a solution.........