Related
I've been using Spb Pocket Plus but I have recently switched to Sbsh's products due to their better speed and less memory loss, but in doing so I lost PP's great feature to make the close button actually close the program and also mapping it to a hardware button.
So now I'm looking for a program to do this for me. Any recommendations?
Zapit seems like a good program but I can't really make it work. I have the Zapit.exe file in the program folder and clicking it closes the browser, but I can't figure out how to map it to a button.
Magic Button does not have the feature to map it to a hardware button, mapping to the program only displays the active programs at the top.
VJOkButt will do this and a bit more.
Let me know if you have no luck. There are a couple of more options as well, have a read through the VJOkButt thread.
V
AEBPlus will do that and more.
What about our own loved SmartsKey?
http://forum.xda-developers.com/viewtopic.php?t=41060
CameronJ said:
AEBPlus will do that and more.
Click to expand...
Click to collapse
more = delete the registry entries for your comm manager button, rendering it useless.
guttrhead said:
more = delete the registry entries for your comm manager button, rendering it useless.
Click to expand...
Click to collapse
Not to hijack the thread - but my comm manager button works just fine with AEBPlus and those times after I've had to uninstall it.
And I think there was a fix discussed for the Comm Manager issue on the board, right?
V
Help please... the comm manager button on my prophet is scrwed by ae button plus... any1 know a fix???
HELP
http://forum.xda-developers.com/viewtopic.php?t=33795
third post discusses the fix.
thanks guttrhead...
fix applied... and now works...
no problem. Anyone know of a free button mapper that doesn't crap things up?
I also had some problem with AEbutton. I first mapped "close activity" to the comm manager button which worked fine. I then added another function to the comm manager for 2 presses which also worked fine but then the one press function stopped working. I had to remove all the functions and then soft reset to get it working again.
I tried the camera button as well with the same results.
It seems there is some problem mapping several functions (one button press, two press, three press and hold) with AEButton/Wizard. As long as I only map one function to each button it works fine.
But I'm happy, I just wanted a close function mapped to a button and I got it.
I started having a bunch of problems after installing AEButton and it didn't work as it said either since I could only map one function to each button.
Uninstalled it and gave VJ Okbutt a try and so far it's the best program I've tried. Works like a charm.
I use SmartKeys, and reset the Camera hardbutton to OK/Close. And just placed a camera link on traylaunch.
When on Camera function, the hardware button reverts back to camera clicking without any further tweaking required.
Works like a charm
My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
chris247 said:
My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
Click to expand...
Click to collapse
HAve you installed AEButtonPlus by any chance?
Yes, I install AEbutton. Is that the reason ?
I am going to uninstall it to try if I will have my OK and WIN button back.
I installed AEbutton for the copy/paste possibility that you can assign to a button (very useful), I will miss that, but I miss my 2 buttons even more.
I uninstalled AEButton, and made soft reset.
The OK and WIN buttons are still not working :-(
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
My OK button is fine, but my WIN button works intermittently. Sometimes it takes three or four presses to register and bring down the Start menu. In contrast, the WIN/OK combined button under the scroll wheel always works without fail. Annoying!
chris247 said:
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
Click to expand...
Click to collapse
TBH, I'd uninstall button mapper, then run something like SKTools to clear all errant shortcuts and and notification queue entries. Then see where you go from there. Failing that, I'd recommend a hard reset.
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
chris247 said:
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Click to expand...
Click to collapse
No, but I do know that in the past when I tried AEButtonplus, I got the same issues as you, but with an uninstall it cured it. It may be worth reinstalling AEButtonplus and then ensure within the app the the Win and OK buttons have nothing assigned to them.
I'm not sure what it calls, ,the codes look different from what is used by things such as the Soft-Key mapper
JmJ17 said:
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
Click to expand...
Click to collapse
Normally the hard buttons can be found under HKLM/Software/Microsoft/Shell/Keys
There you will find a series of subkeys beginning with 40C
Each subkey correspond to a hard button. For instance on my ppc 40C1 is the calendar hard button. So try to find the subkeys related to Ok and Win buttons and change the default value by the path of the app you want to launch. By default, the hard buttons applications links can be found under
/Windows/AppButtons
Cheers,
.Fred
ps.: I don't have an OK and WIN buttons on my ppc, so maybe its different for these two...
Thanks for the information dotFred, I have had a look on the registry and in the windows folder.
You are right the linking between the application and the hard button is made here, but only for the configurable buttons that you can configure in WM5 settings/button. Unfortunately the TyTN's OK and WIN button on the front and on the side of the PocketPC are not included :-(
I'd also like a way to configure the function of the start button, and the side OK/start button. I have installed Smallmenu and would like those buttons to open it instead of opening the standard start menu.
Any ideas?
I noticed on my 8525 that when i put some programs onto my memory card it deactivated these two buttons as well. You might try uninstalling some recent programs. (the program that caused problems with me was an expired trial version of WA2 that i moved onto my card.)
we know HTC Touch Pro2 has an on screen shutter button, do you find it difficult when you try to take photo of yourself?because you cant see the small on screen shutter button.
Do anyone know a tweak/altenative solution for this tiny shutter button?
make it bigger,or better yet,simply make it this way: the whole screen is the shutter button, you can take pictures by clicking anywhere of the screen.
I searched several hours without a thing,it seems that I am the first person who wants this.
Solution
The on screen button pissed me off too. Most particularly because I also turned off the shutter sound, so I would be holding the part of the screen thinking it took the picture...to turn the phone around and discover it only focused the image.
Install the keyboard controller for the rhodium, choose to add a key, press the PTT key "if you already have it mapped to something, don't worry. I also have apps mapped to the same button". When in the map config, click the [+] next to Rule. pull out the stylus, click the windows button, go to your camera, and stick the stylus back in. Below "Rule name" the window should say "IACSP20_Main" without the quotes. Choose "Direct key mapping", then select key "13 Enter" for the key. Finally send the key to the operating system.
What this does is: while you're in the camera window and push the PTT key, that key is pushing the enter key. It acts the same as the onscreen shutter button, as in, you have to hold the button. BUT, its a lot easier to find and easier to hold the phone when pushing the button. Good luck with your mapping.
zyphuris55 said:
The on screen button pissed me off too. Most particularly because I also turned off the shutter sound, so I would be holding the part of the screen thinking it took the picture...to turn the phone around and discover it only focused the image.
Install the keyboard controller for the rhodium, choose to add a key, press the PTT key "if you already have it mapped to something, don't worry. I also have apps mapped to the same button". When in the map config, click the [+] next to Rule. pull out the stylus, click the windows button, go to your camera, and stick the stylus back in. Below "Rule name" the window should say "IACSP20_Main" without the quotes. Choose "Direct key mapping", then select key "13 Enter" for the key. Finally send the key to the operating system.
What this does is: while you're in the camera window and push the PTT key, that key is pushing the enter key. It acts the same as the onscreen shutter button, as in, you have to hold the button. BUT, its a lot easier to find and easier to hold the phone when pushing the button. Good luck with your mapping.
Click to expand...
Click to collapse
Hey,thanks for your reply,so detailed,I am touched.
I tried your method,it works!
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
same problem here
livealoha50 said:
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
Click to expand...
Click to collapse
i had it mapped to the ptt the same way on nrg cht 4/16. i didnt even have to hold the button in fact, i just pressed it and it would take a picture. now the ptt button wont take a picture at all for me.
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Google Rhodium keyboard controller or look for it here at xda and even in this forum. BEST software. You can map ANY button to ANY key while still maintaining the keys natural function like pressing home goes to home, and holding hole for 2 seconds opens camera, and holding vol up or down can be enter which, in camera mode, takes a picture .
lilchicano said:
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Click to expand...
Click to collapse
the touch focus has no effect for me. regardless whether its on or off, my ptt button wont take a pic. im gonna mess around with the rhod kb controller a bit, maybe i did something wrong there. if not, im gonna have to mess about in the registry and see what can be done there.
Edit: I fixed it. It wasnt something I did wrong w/ rhod kb controller. Went into hklm/software/htc/camera and its subfolders and changed 5 or 6 things in there, some to fix the prob and some were just changed to suit my preferences. I gotta go to work shortly, but at about 2:30 this morning I'll be able to write down all the registry changes I made and post them in this thread. Now when I press the ptt within camera, it autofocuses and then takes the pic without having to hold the button, which is nice I have CleanRam mapped to ptt long press.
well i had it working perfect yesterday when i posted, but then i booted into android for a few hours while at work, and when i went back to windows, the camera went back to doing the stupid focus and then no picture crap again. so today i went back thru everything i had messed with and tried every combination of settings i could think of, and couldnt get it to work right again.
Do you use the Rhodium Keyboard Controller to remap your hardware buttons? If so, I can give you how I setup my buttons to take pictures and such?
Yeah thats what I used with the 4/16 cht nrg rom, when mapped to open program windows/start menu/multimedia/camera.ink by single press, it would open the camera and if I pressed it again, it would take a photo. I am still using the rhodium keyboard controller, tried setting double tap to 13 and that didnt take a pic, tried pointing it at windows/camera.exe and that didnt work, thats when i went into the registry. between the keyboard controller and registry editng, i had it opening the camera and taking photos both with single press of the ptt button. i then booted android later that day cause its easier for texting while im at work. later back to windows, and the ptt would open camera but not shoot. i dont understand how changes to the registry could work to make it work like that but not survive a reset? i went back iand messed around in the registry tryin different combinations of stuff, and couldnt get the ptt to snap a shot again. possibly theres something different in camera.exe from rom to rom?
Just make one of your hardware buttons the enter button. Enter focuses and takes the picture. I make my volume keys both the enter button. Also good when using them in total commander too .
i had made my ptt = enter upon double tap and it wouldnt work, neither would the hw qwerty button. i know what ur talking about, i have always set my ptt to take pictures, even on my original tilt, usually open program - camera.ink will open camera and also take pic, but for me neither enter nor open program will work for me. its gotta be either a reg entry that i just didnt get right, or the actual camera.exe is different from build to build, which i find believable because i remember switching albums on my original tilt and to do it i would also hv to switch camera.exe's also. which reminds me, is it me or does the tp2's photo album absolutely suck? on my tilt, i could zoom down way closer, and the album was gesture driven. draw a circle w/ur finger one way would zoom in, other way zoom out, etc. love the phone, hate the picture album
Ah weird... enter should work :/...
Yeah... what happened to the gesture thing? Guess they want to "try" and make the pointless zoombar serve some sort of function even though I never use it.
I use S2V and map the dble tap send key as up, and dble tap end key as down. I've always like S2V but just wish A_C would update it.
livealoha50 said:
New Leo Energy Rom - this method is no longer working - camera just touch focuses - but does not "capture" - picture - any more advice?
Click to expand...
Click to collapse
I used to do this when the pro 2 first came out and this always worked but for the last 4 months this has stoped working and it sucks cause i loved having this option. I have tried asking for help from NRG's irc chat room and they banned me for asking lol, i even tried asking in his thread several times and ppl tell me it works fine for them, but it just dont work for me. it always worked before but i flashed to a new NRG rom update and it just stopped working, cant remember when it worked last, but i do miss it!!! This option works fine on ALL other roms but NRG's
lilchicano said:
just go to the settings and click on advanced and see if touch focus is actually on, because if its turned off then it would just focus but not take a picture.
and that solution of yours to map it to the PTT button doesnt work for everyone (like me) because some of us dont got that button, but reguardless if it works for you then thats good too
Click to expand...
Click to collapse
I used to be able to pick any hardware button to make this work, i use the vol up key myself!!
Thanks zyphuris55!
enter key doesn't work for me either.
A plausible reason for the "Enter" workaround working for some people could be the use of different camera drivers.
With the HD2, the early camera drivers allowed a photo light (using the LEDs) to be used when taking a picture in the dark. However, the recent camera drivers no longer allow photo lights, and the user is dependent on a simple flash upon taking a photo.
I know that NRG and other chefs use different camera drivers (they sometimes post it in their changelogs), so this could be why some are able to use "Enter" to take photos while others can't.
If it is indeed driver-related, you can't do anything about it, as these drivers are cooked into the ROMs (cabs and reg tweaks have no effects).
P.S. At least the TP2 has a lot of buttons that can be remapped! The HD2 can only have the Send (Hold) function be remapped!
After about month of using my dinc, I've found that I literally never press the opti trackpad button. Is there any way to make this button act as a dedicated camera button (or to set it up to launch a specific app). I've done no customization to my phone thus far (waiting on a stable froyo custom ROM), but I have no problem with rooting or installing a custom ROM in order to get this functionality. Does anyone know if this is possible? I'd love to reclaim this currently useless button.
Download Vignette from the market and you can set your trackpad to take pics or you can even tap the screen to take a photo.
I think morph2k4 is talking about having the button work even when you're not in a camera app. So the idea would be, any time you press that button, it would either take a picture or open a camera app. With Vignette, that button only works when you already have the app open.
Exactly right, I want to make that button load up my camera app from anywhere.
You should take this to the development forum, they might be able to help.
Hi everybody,
I've been digging into a lot of forums without clear answers and you may be of some help:
I've changed the digitizer of my Omnia I8000 running under W6.5 and everything was ok except that I damaged the ribbon cable for the keypad and the camera buttons. I was so close...
Now I do not have access to the camera buttons and can't enjoy my new scratchfree screen with homemade photos...
I've ordered a new one but in case i can't fix it I was wandering if there's a way to remap this button to the cube button for exemple.
Hbutton or aeplus is of no use, these hardware buttons are low level linked to the cam app.
I can launch cam application but when in camera mode i have no way to take the picture. Remapping the cube button to the cam app works by launching it but when in cam mode, the cube button don't trigger the picture.
I did'nt find where the low level hardware keys are link to the cam app.
Even if it means cooking a special rom i don't care, I can live without the cube button.
Any help appreciated
Eric
hey dude!
we have the same problem. did you already find ways on how to remap your camera key to hbutton?
i am also searching now on how to remap it. i will let you know if i found some.
danph_07 said:
hey dude!
we have the same problem. did you already find ways on how to remap your camera key to hbutton?
i am also searching now on how to remap it. i will let you know if i found some.
Click to expand...
Click to collapse
I think you should try an app called AE Button Plus v2.6.6.1.
sorry. I could not attach the file so please try google it.