Related
Having looked all over for a couple of days
I came across a picture with instructions for
hard resetting a wizard, which is resetting the phone
thus the phone lock as well.
Dead easy really
1. Press the Comm Manager button (top left)
together with the Voice Activation button (top right)
for 2 seconds.
2. Keep holding the 2 buttons above and press the soft reset
(middle right little hole) with the stylus for another 2 seconds.
3. When the black screen appears it'll ask you to click Send
That's it All done !!
The wizard's going to reboot and reset himself.
Hope this is going to help some of you.
This is called 'Hard Reset' and perhaps its known to almost every wizard owner,its supposed to be known though !!!
Anyways ! thanz for the info!
ATENTION PLEASE... Thanks.
Nice Thread...
but...
what is a hard reset?
what is a soft reset?
what is a cold reset?
what is a simple reset?
what does it do for us?
What da heck!?
Let me recomend this as sticky....
NOP even tough... as a new topic forum...
Is there any way of Hard Resetting (of Touch Elfin w/ WM 6.1) w/o Hard buttons combination ? like in old days of WM??
I haven't heard of it, why do you need it? If you've got two hands, you can do hard reset with buttons
Hey guys,
I think there are some issues with the recent clones not hard resetting. I was a very happy jade clone owner until it happened to me as well. My phone stopped booting and I wanted to hard reset but it wouldn't let me. It seems I'm not the only one either;
http://www.dealextreme.com/forums/Forums.dx/Forum.25045~threadid.439141
http://www.dealextreme.com/forums/Forums.dx/Forum.25045~threadid.464585
I suspect the [green + red + on button] never worked for my clone in the first place and this one has a different button combination but I never tested it before running into issues. We know there's a few different versions of the phone. Mine has the following specifics;
- Unlike other phones, when starting up, mine shows the words "smart mobility" before showing the windows boot logo.
- The phone says that it has a QUALCOMM 7225 @ 528mhz processor (this could perhaps be spoofed in windows to make it look more like a real jade?)
- Mine had a menu option called "GPS Setting" in the settings menu while some other people don't (may be pre-installed software, something to do with A-gps)
At least two things that could be done (maybe more?);
1. Would someone with a working phone similar to mine (especially if it says "smart mobility" at boot) to test the [green + red + on button] hard reset method? Someone else will have to tell you if you can cancel out of hard resetting after testing because I have never been successful.
2. Perhaps someone with Chinese knowledge could look on the chinese forums like 999ppc.com if they have something to say about it. Or maybe ask the Chinese sellers. Most webshops seem to be resellers and know nothing about the product.
Just when I started falling in love with my phone, she dies a horrible death. Oh what tragedy I would appreciate any input you guys might have. Thanks a lot guys.
Interesting info
Guys, I found some interesting information;
Holding green + OK and then pressing power brings up the "calibrating" screen.
Holding red + OK and then pressing power brings up the "downloading" screen.
Does anyone else have this too?
In both modes you can connect the phone to USB and Windows will try to recognize the phone but fails. I highly suspect they are both meant for sending data from PC to the phone and vice versa because the phone turns off as soon as you disconnect the cable. Anyone know what these modes do? Can this perhaps be useful for recovery?
Also, wasn't holding green + OK and then pressing power supposed to be the way to install a new Windows Mobile rom? It seems more and more likely that this phone has a different hard reset command but I haven't found it yet...
This is my first PPC so I would really appreciate any input you guys have on this. Thanks.
Solution found
After a LOT of trying out different button combinations, I finally found it. I was convinced that the button combinations on this phone were simply different and they were!
To hard reset the phone to manufacturer settings:
volume down key (on side of phone) + RED key + power button
You will see a menu where you have to press the up-key (not the volume up key but the up key on the directional pad) to confirm. Next it will look like the phone is starting up and hanging as usual, but just WAIT. Do NOT pull out the battery or anything. It is working. After a short while the phone will turn itself off. Now press the red reset button next to the battery and it will start!
BONUS:
You can install a different Windows Mobile rom with the following key combination:
volume down key (on side of phone) + GREEN key + power button
You have to have the rom (SMART.UPR) on your SD card (non-SDHC, fat16 formatted). I did NOT try this but it should be relatively safe as you can always do a hard reset if you screw up. Since these phones are different, the normal roms *might* not work, but I suspect they will. Personally I don't care for WM6.5 so I'm not gonna try it.
Glacius0,
Thanks for the info. I believe I've the same version phone as you do, got mine for a week now - only setup phone, wifi, weather so far.
I see the same features you've listed, i.e "smart mobility" at start up, QUALCOMM 7225 @ 528mhz processor? and "GPS Setting" in system settings.
So that's the reason the various hard-reset button combos in manual and DX forum don't work. Your button combo worked on my 2nd try. By the way this is providing the same result as the "clean boot" routine in system settings for me.
Unfortunately both methods of hard-reset are not removing the pre-installed touchflo version V1. I'm getting errors installing version 2.0 over version 1. I guess V1 was burned/flashed-in with Win6.1 in the ROM? I think my next step is flashing it with a clean Win6.1 in order to proceed.
After a hard reset it will automatically start installing a bunch of software like opera 9.5 and what not. Maybe you can cancel this by pressing the red button or the X in the corner and then it won't install touchflo. Personally I use SPB mobile shell so I didn't run into any problems. Installing a fresh WM6.1 oughta work though. Let me know how it went.
mine work when i press green button + red button + power
but it show an screen saying
UPDATE MENU
1-Update logo
2-Update OS
3-Update Eboot
4-Format User Space
5-Return
i tried every option in the menu
i put the smart.upr in the SD fat16 but it doesn't work
Glacius0 said:
ry this but it should be relatively safe as you can always do a hard reset if you screw up. Since these phones are different, the normal roms *might* not work, but I suspect they will. Personally I don't care for WM6.5 so I'm not gonna try it.
Click to expand...
Click to collapse
I have the same Qualcomm 7225, initial logo is Smart Mobility and then HTC (or maybe HTC comes before Smart Mobility), clone bought from DX.
Have not tried any flashing yet.
Oh no, after I installed an app, my phone is now stucked at the HTC logo (after the Smart Mobility logo and the little music played).
I have the Qualcomm 7225 version frm DX.
I remove battery and reset, but the phone stucks at the HTC logo (after the music).
Doing ALL the reset keys combination in this thread did not reset the phone (whether the phone is on or off before the combination is pressed and hold down).
Can somebody please let me know what else should I tried to reset/reflash this phone ?
Hey Sintoo,
I just saw your thread on Dealextreme as well. Your phone does seem a little different because I don't get a sound or HTC logo when booting up. Interesting that "volume UP + volume DOWN + power" does something for you. I would never have thought of trying that. It doesn't seem to be the combination to hard reset your phone though. It does however show that there's some functionality to be found if you get the right button combination, so I suggest you try a lot of them. I'll give you a few pointers (the phone should be off btw, but I think you know that by now):
1. It seems that almost all button combinations involve 2 buttons + the power button. So try this first. Later you could try more buttons but it's not likely that this is necessary.
2. The 4-point directional pad (around the center button) doesn't seem to be used too often but sometimes it is, so try that too after trying the other buttons.
3. Some phones also involve the red reset button inside the phone, but I don't think it applies to this one because all it seems to do is cut the power from the battery. You might wanna try it as a last resort.
4. You could write down a scheme on which you mark all the button combinations you can try. This sounds excessive but I had the same problem as you and I almost forgot to use the volume buttons because I was just trying random stuff.
Your next best bet is figuring out how the updating menu that you found works but I think that's gonna be a lot tougher to figure out. It seems like you either got the wrong rom file or the wrong file name. Try placing a dummy SMART.UPR file and see if it does anything different. Also there's a program called TouchRUU which supposedly let's you update your phone through USB in some cases but I've never gotten it to work. Good luck and make sure to report back here for future users with similar issues!
PS: Don't worry too much because dealextreme has a good return-policy, so even if you can't fix it I'm sure they'll take the phone back and replace it for you. I've been buying from them for years.
..
Thanks Glacius0.
I will keep trying.
Hard reset
Hi, I am trying to make a hard reset but nothing happend.
Only, pressing LOW VOL + POWER + Red button (inside) produce a white screen and the USB loader.
But for now I need a simple HARD RESET . With my AXIM X51V the same buttons is SD ROM loader. Hard Reset is only Power and Reset buttons, but don't work wuth the Jade Clone T3232.
The clone has a MARVEL 624 MHz and 128Mb RAM PDA version V03.06.00 PDA built S0907151858(1.109)_BV.
Any idea?
Thanks Glacius0.
work for me
This probably won't work, but... try renaming the smart.upr file to JADEIMG.nbh
reset keys combination
sintoo said:
Oh no, after I installed an app, my phone is now stucked at the HTC logo (after the Smart Mobility logo and the little music played).
I have the Qualcomm 7225 version frm DX.
I remove battery and reset, but the phone stucks at the HTC logo (after the music).
Doing ALL the reset keys combination in this thread did not reset the phone (whether the phone is on or off before the combination is pressed and hold down).
Can somebody please let me know what else should I tried to reset/reflash this phone ?
Click to expand...
Click to collapse
Welcome to the club
For two days I trying all the combination and nothing, only "Smart Mobility" logo and the little music played.
Very sad story
Scooter_ID said:
Welcome to the club
For two days I trying all the combination and nothing, only "Smart Mobility" logo and the little music played.
Very sad story
Click to expand...
Click to collapse
Mine still boots but I have the same problem in which the new clone I have doesn't respond to any key combinations people have said on these forums.
Version info:
ROM 01.001.1 CHS
ROM DATE 9/30/2009
RADIO VERSION 1.07.9291
Has anybody tried combinations including the reset button on the back? I tried a few combinations but when I damaged my volume down button I decided to stop.
Try to release the power botton after pull the three bottons in a combination , it works for me.........
hty cloned htc touch 3g t3232
i have a hty cloned htc touch 3g t3232 , it has freezed on wm6.1 logo screen , when i tried hard reset by pressing red key+volume down+ power , it asked if i want to reset it i should press volume up , i pushed it , the phone restart, but it still freezed, when i call my phone number from other [hone , my uty rings , but i cant see anything
i have jade clone...
Version info:
ROM 01.001.1 CHS
ROM DATE 9/30/2009
RADIO VERSION 1.07.9291
i tryed many combinations, but cant start bootloader can anybody help?
For Dadiio;5231139 Said:
"mine work when i press green button + red button + power
but it show an screen saying
UPDATE MENU
1-Update logo
2-Update OS
3-Update Eboot
4-Format User Space
5-Return
i tried every option in the menu
i put the smart.upr in the SD fat16 but it doesn't work"
I have the same MENU, bro, and for me didn't work too. I've tried every key combos on this forum on topic think I have received a clone t3232 and still dosn't work. Someone have any idea?
Sequence keys for calibrating and downloading mode of jade clone T3238+ with qualcomm cpu:
Downloading mode = red button + volume up + reset
Calibrating mode = red button + volume down + reset
Hard reset: green + red button + reset (or poweron) and up of wheel for confirmation
Updating mode = volumeup + volumedown + reset (only from sd)
I don't know filename correctly for flashing rom :-(
I'm searching rom 6.1 or 6.5 for my device anyone can help me?
Jade clone T3238+ cpu qualcomm 528 MHz
RAM = 192
ROM = 256
Gsensor = present
Wifi = present
Bluetooth = present
Gps = present
Radio FM = absent
Other question: headphones wired are mono. But it's headphones because i have tested with signal test injection. I'm not sure if output is mono.
Thank you.
I have a question. In driver section i see fm driver but not application
hi,
my htc TD2 doesn't go past the htc start up screen .. i can't active sync my device either... any suggestion???
ur gonna want to try a hard reset i'm afraid. WARNING: this will wipe out all your data on the phone (i often take out my memory card before doing this, not that u need to, i'm just playing it safe)
to hard reset, do the following: hold both volume buttons down and press the power button. your phone will then hard reset.
cheera mate! it worked!!!
how can I do a hard reset to htc hd2 chinese clone T8585?
the phone keeps boots itself and I can't get to windows (6.5) screen.
thanx!
mooki
if its the same as the hd2, then it's pressing volume up and down at the same time while resetting the device.
what do you mean restart?
a soft reset?
or power on the cellphone?
if you mean powering on the cell then it's not working
by holding the VOL - and VOL +
nothing happens that way and I guess it's because this is a clone
and not a real HTC phone. any ideas?
mooki9 said:
what do you mean restart?
a soft reset?
or power on the cellphone?
if you mean powering on the cell then it's not working
by holding the VOL - and VOL +
nothing happens that way and I guess it's because this is a clone
and not a real HTC phone. any ideas?
Click to expand...
Click to collapse
Didn't you got a Manual of your device??
Normally it's explain there!!!
Users here are owner of HTC HD2 (official one!!! No Clone) Things are not the same!!
don't you think I looked over the manual?
it's not explained there and I thought someone
here knows how to do it.
Just for the record, the HTC Touch HD2 T8585 is not a clone, that is the model number that the HD2 is sold under in Taiwan. The attached pic is a translated version of the HTC HD2 that Taiwan Mobile sells.
but how you hard reset it?
mooki9 said:
but how you hard reset it?
Click to expand...
Click to collapse
Q; How to do a Hard Reset?
Attention this will brings your installation beck to factory mode.
Reset via settings:
- Go to the Home screen's Settings tab, tap Menu > All Settings > System > Clear Storage.
- Enter 1234.
- Tap YES to perform the reset, or tap NO to cancel the reset.
Reset via phone buttons:
If you cannot turn on your phone or access the phone settings, you can still perform a Hard reset by using buttons on the phone.
- With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
- While holding the volume buttons, press the END/POWER button briefly and then release it.
- When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
- Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
Next time you have a question you could first check the HTC HD2 wiki or use the search function. In this case you could have found out that the T8585 is not a clone, and how to hard reset it. Also, when others do your work for you, it would be nice if you thanked them.
before you judge me of things I did not do you can ask me
and I will answer you:
did you look for this issue on the forum before you post your question?
answer: yes I did!
I don't know if it's a clone or not but it's not made by HTC.
I bought it from DHGATE
http://www.dhgate.com/free-shipped-...creen/p-ff8080812af0030e012b04ff36ea4980.html
and finally I want to thank each and every one who tried to help me
here but I still did not manage to hard reset it, so this is why I probably
save the thanking part to the end...
cheers m8!
ran
If you still can not reset the device by following the procedures described above, then it would appear your unit is defective. In this case, I suggest you contact the seller, and demand a replacement.
Edit: After looking at their specs on the website, it does not appear to be a real HD2. Is your screen size 4.3 inches or 3.5 that the website shows? If it is 3.5 inches it is a fake, then you should demand your money back. Even the CPU specs are not right for the HTC Hd2 T8585. Unless the website has the wrong specs, this would really appear to be a case of fraud.
mooki9 said:
before you judge me of things I did not do you can ask me
and I will answer you:
did you look for this issue on the forum before you post your question?
answer: yes I did!
I don't know if it's a clone or not but it's not made by HTC.
I bought it from DHGATE
http://www.dhgate.com/free-shipped-...creen/p-ff8080812af0030e012b04ff36ea4980.html
and finally I want to thank each and every one who tried to help me
here but I still did not manage to hard reset it, so this is why I probably
save the thanking part to the end...
cheers m8!
ran
Click to expand...
Click to collapse
I manage to get two screen:
1. downloading...
holding GREEN + ARROW and pressing POWER
2 calibrating...
holding VOL UP + RED and pressing POWER
how the hell do I get to the Hard Reset?!
mooki9 said:
how the hell do I get to the Hard Reset?!
Click to expand...
Click to collapse
Like I mentioned before sir, almost all users are HTC HD2 users here!
You have a clone; it's not the same device, not the same way of functioning.
So I'm afraid it will not be easy to help you out.
Tray to take contact with the factory of your clone device.
Hard Reset for T8585 HD2 mtk -htc clone-
My friend the hard reset on this device isn´t like old clone version of HTC´s smartphones
anyway first of all you need the ROM for T8585 mtk sensitive screen
steps for a hard reset
in a 128mb, 256mb or 512mb SD copy the ROM
insert the SD (obviosly)
the press vol up + call down + call up for 10 sec
the hard will start and running
I hope it´s usefull
mooki9 said:
I manage to get two screen:
1. downloading...
holding GREEN + ARROW and pressing POWER
2 calibrating...
holding VOL UP + RED and pressing POWER
how the hell do I get to the Hard Reset?!
Click to expand...
Click to collapse
Hard reset on this mobile:
switch of phone
plug in usb power
when battery comes up
press green+winlogo+red
then after ask press green
For that price, you could've gotten a real T8585.
hard reset for hd2 clone bootloader??
Big Hello dear forum members.
If someone can help regarding the Chinese HTC HD2 (leo t-8585 +). In fact, I bought the above mobile phone, and I have a problem with poor signal quality, poor call voice. Many people told me that I need to put a new version of the radio. For me it is 1.07.10061. Now I wonder how it can do, how to find the bootloader on my mobile, how to put HSPL and whether it will be a solution for better sound quality and signal networks.
Other features:
ROM Version: K102_CHS_S00_V0.0.6
ROM Date: 6/30/2010
Radio Version: 1.07.10061
Protocol Version: DV3.0
Model No.: NEXPERIA SY.SOL 5209
Platform: Pocket PC
IMEI: 355037010040775
Thank you in advance
Each phone has a reset key?
Each phone has a reset key?
It looks like iphone4
It looks like iphone4
mooki9 said:
I don't know if it's a clone or not but it's not made by HTC.
I bought it from DHGATE
Click to expand...
Click to collapse
LOL!
It's comes with a stylus.