Hi,
Got a problem, i dropped my phone and the bottom of the screen cracked. Now the phone is locked and because i can't use the touch screen , can't unlock it! anyway to get around this without reflashing?
Thanks
I guess some software can do this,dont rem names
like power control software?
Yes. Learned it the hard way! , instead of using the remote control , i did a hard reset , that got rid of the lock screen but now the dreaded screen calibration is where i got stuck on! But i guess i'm not the only one. One problem with the remote control software is that it doesn't react to screen calibration , so you have to delete welcome.lnk or welcome.exe from the windows/startup folder and that cleared it up.
Keyboard solution
I had this same problem when I cracked my screen on my xv6800.
The solution I used to unlock the phone is to:
1. flip open the keyboard
2. push the dash action button above the letter Q
3. push the button with the blue circle (character switch button?) next to the windows button.
4. push the letter V
Basically to unlock the phone tap unlock on the screen or if you screen is cracked hit the * button on the key board.
I hope this helps someone.
J
Related
Hello,
I have a t-mobile wing with a broken screen. I'm sending it back for replacement but i want to hard reset before i do. Ive tried doing this by watching reviews on youtube to see how the menus are laid out, but i cant seem to get it right. Can anyone give me an extremely specific walkthrough?
or better yet, would someone let me call them or call me so we can walkthrough the hard reset together?
Also, I tried using the left,right softkey plus soft reset button and i don't know where to go after there. I'm not even sure if that worked.
i did this on my mda when i had a broken screen...all i did was use the actual buttons...i pressed the windows buttons used the directional button to move up and down, went to settings, used the dirctional button to move around and went to system, then used the directional button again to go to clear storage and that was it...
Can you tell me the button combination?
amreason said:
Can you tell me the button combination?
Click to expand...
Click to collapse
1. press the window button (or the start button, its the bottom left button on the phone has the windows logo).
2. go down with the joystick (the big directional button in the middle) and go to settings (select it with the button in the middle of the joystick)
3. using the joystick again go to system (its the second button on the bottom)
4. using the joystick again go to "clear storage" and select it with that middle button again (the one inside the joystick)
5. your done....
I have a broken screen i cant see where settings is. how many clicks down?
Or how many clicks up?
amreason said:
I have a broken screen i cant see where settings is. how many clicks down?
Or how many clicks up?
Click to expand...
Click to collapse
so you cant see anything??? i thought it was like cracked or something...anyways...here we go...ill try...
1.windows button
2. setting click up once, that should get you there or two clicks if you have the help button there...
3. click up once then click over right
4. click up once and down once then select that should get you to clear storage...
5. it will ask you to type the numbers 1234 and press yes which should be the button right button above the windows and phone button...
note: its a long shot because depending on where you left off last thats where the button will take you...if that doesnt work trying turning your phone off and trying it again to reset everything...
hope that helps
romeo...
NICEEEEE
Thanks so much. it worked. Phew. now my tracks are covered. Not that i was over clocking or changing my page pool or anything. wink wink.
Oh and in case you were wondering. My phone dropped from my bed on to my carpet. And i don't know how it is physically possible but the screen cracked on the inside meaning when the phone is off it looks perfectly normal. But when i turn it on i get a crack and all white screen . Lame. I'm going to make them send me a new one.
I think what happened is that i charge it at night and i keep it under my pillow (vibrating alarm wakes me up) and i think it overheated and that caused the screen to crack not the 1.5 foot drop on to fluffy carpet. The phone shows no physical sign of damage.
glad i can help...
romeo...
glad i can help...
romeo...
Hi all,
i need your help.
I broke my htc touch screen yesterday.
My touch is password protected, i tried to logon but that don't work.
I want to keep all contacts so i can't do an hard reset.
Do you know how to reset my password, or a software that don't need password or any other solution?
Thanks you
- power off your device
- hold SEND and END (green and red) buttons
- Power on your phone
a black screen with some white text will appear. So you just hit ACTION (middle) button and its done
its the only way
if i do that i will lost my contacts. no?
Try "MyMobiler"
-darota-
Darota,
we can take control with mymobiler after unlock phone.
But i solved my problem.
I have a second htc touch on which I took the lcd screen
Thanks to all
The screen on the my streak has been slowly degrading, to the point where i can barely do basic functions of the phone. It doesnt register touches or swipes a large percentage of the time. If I long press on the background to bring up the add shortcut widget popup, it usually will bring the phone back to 85% function. But if I lock the screen and try again, I have to go back to longpressing until I can click apps.
Often presses will register along the top bar and bring up the notification screen or short menu when I am clicking anywhere but on the top. It has happened several times while typing this.
Has anyone had Touchscreen problems with their Streaks?
Sent from my Dell Streak using XDA App
Do you have a screen protector on and maybe some debris between it on the screen?
I'd recommend aligning the screen.
User Manual said:
If necessary, you can calibrate your touch screen as follows:
1 Press and hold the power button and then touch the Power off option on the screen to turn off the device.
2 Simultaneously press and hold the volume up button and volume down button .
3 Without releasing the volume buttons, press and hold the power button , until the device turns on the configuration screen.
4 Press the volume buttons to move the highlight bar on the screen to the Screen calibration option.
5 Touch the Camera button to start the touch screen calibration. 6 Wait for the device to reboot.
Click to expand...
Click to collapse
Also you could enable the debuging mode by typing in *#*307#*#* in your dialer, then in your app list you should see some new apps.
Open up Dev tools the select Pointer Location
Also another one is EmList and then select "Touch_Panel" theres a handful of diagnostic tools there that are pretty fun to mess with to see if something is physically wrong with your screen
Oh and to hide/disable debugging mode, just type in *#*308#*#*
I do also have some screen issues i had 8105 went back to 8023 and was working fine until today that it was acting up, but is better than 8105 which only let me touch half the screen, now it lets me do about 80% of the screen from bottom to top. I do have a screen protector, when I was running 1.6 didn't see this issue. Also i noticed that sometimes when my fingers are a bit sweaty the touch input doesn't work that well.
No screen protector, stock 1.6. Will try debug, thanks.
It happens with sweaty hands with dry hands its just messed up.
Sent from my Dell Streak using XDA App
I just used the 6 step block method and it seems to have solved my issue. Help very much appreciated!
Sent from my Dell Streak using XDA App
How long did it take to reboot after you hit the camera button?
I had to do mine yesterday as the lower part of the screen wasn't registering touches properly, as if it was about 50 pixels out.
First time round it didn't boot up with the volume keys held so i popped the battery off and started again (seems to be a common issue with this device). Then it was pretty much as standard for the boot. Keep the buttons held til the menu pops up, choose calibration, leave it until it says it's done and then reboot.
Again, should reboot as normal but if it doesn't try popping the battery off. The rear cover seems to cause a fair few issues with this!!
oh and running the calibration fixed the issue for me!
Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...
Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.
Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice
yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.
lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand
seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.
same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179
Merged threads as topic is similar....
Cheers,
M_T_M
So recently i start flashing and using langthang's MIUI roms and keeping update and flashing all his new release rom. so couple day ago all of the sudden, i don' know what causes it and how it started it. my red button on far right. pressing it turn on and off the screen.so now when i press it to make the screen go back on from off mode. after i pressed the button the screen light turn on and the lock screen is there but when i touch the screen and try to move the ring(pyramid lockscreen) up to unlock, but the ring is not moving, it like there is no touch screen ability to my phone's screen.
but when i use the green button far left, the button usually to use phone. that button doesnt turn off the screen but it just turn on the screen, this button is working normally. i can move the ring up to enter the main screen.
the screen isnt cracked or any thing, but i do have a protection layer over it which been there since i got the phone and never got this problem before.
what do you guys think my problem is and how can i solve it?
thank you!