When I'm doing anything on my TMO HTC TP2 And it goes into sleep mode (i.e. the top power button) and i turn the screen on it goes to the main screen not where i was previously. this is highly annoying especially when i'm typing a long message and hit the top power button by accident and i turn it back on and the message is gone and it flips the screen to Main screen, and i would appreciate it if someone could tell me whats wrong because i swear that this never happened when i first got it
The screen on the my streak has been slowly degrading, to the point where i can barely do basic functions of the phone. It doesnt register touches or swipes a large percentage of the time. If I long press on the background to bring up the add shortcut widget popup, it usually will bring the phone back to 85% function. But if I lock the screen and try again, I have to go back to longpressing until I can click apps.
Often presses will register along the top bar and bring up the notification screen or short menu when I am clicking anywhere but on the top. It has happened several times while typing this.
Has anyone had Touchscreen problems with their Streaks?
Sent from my Dell Streak using XDA App
Do you have a screen protector on and maybe some debris between it on the screen?
I'd recommend aligning the screen.
User Manual said:
If necessary, you can calibrate your touch screen as follows:
1 Press and hold the power button and then touch the Power off option on the screen to turn off the device.
2 Simultaneously press and hold the volume up button and volume down button .
3 Without releasing the volume buttons, press and hold the power button , until the device turns on the configuration screen.
4 Press the volume buttons to move the highlight bar on the screen to the Screen calibration option.
5 Touch the Camera button to start the touch screen calibration. 6 Wait for the device to reboot.
Click to expand...
Click to collapse
Also you could enable the debuging mode by typing in *#*307#*#* in your dialer, then in your app list you should see some new apps.
Open up Dev tools the select Pointer Location
Also another one is EmList and then select "Touch_Panel" theres a handful of diagnostic tools there that are pretty fun to mess with to see if something is physically wrong with your screen
Oh and to hide/disable debugging mode, just type in *#*308#*#*
I do also have some screen issues i had 8105 went back to 8023 and was working fine until today that it was acting up, but is better than 8105 which only let me touch half the screen, now it lets me do about 80% of the screen from bottom to top. I do have a screen protector, when I was running 1.6 didn't see this issue. Also i noticed that sometimes when my fingers are a bit sweaty the touch input doesn't work that well.
No screen protector, stock 1.6. Will try debug, thanks.
It happens with sweaty hands with dry hands its just messed up.
Sent from my Dell Streak using XDA App
I just used the 6 step block method and it seems to have solved my issue. Help very much appreciated!
Sent from my Dell Streak using XDA App
How long did it take to reboot after you hit the camera button?
I had to do mine yesterday as the lower part of the screen wasn't registering touches properly, as if it was about 50 pixels out.
First time round it didn't boot up with the volume keys held so i popped the battery off and started again (seems to be a common issue with this device). Then it was pretty much as standard for the boot. Keep the buttons held til the menu pops up, choose calibration, leave it until it says it's done and then reboot.
Again, should reboot as normal but if it doesn't try popping the battery off. The rear cover seems to cause a fair few issues with this!!
oh and running the calibration fixed the issue for me!
In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).
Hey there,
Maybe the ROM h doesnt function properly on your device. Try shifting to another rom. All are equally amazing. If you do not want to shift, try running task29 and start the process all over again
SheenaIsAPunkRocker said:
In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).
Click to expand...
Click to collapse
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.
Nigeldg said:
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.
Click to expand...
Click to collapse
That probably is what the problem is. Btw to everyone, I haven't noticed a difference in pressing it really hard, I noticed that pressing it a lot of times does the trick
Sent from my HTC HD2 using Tapatalk
Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.
SheenaIsAPunkRocker said:
Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.
Click to expand...
Click to collapse
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button
elesbb said:
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button
Click to expand...
Click to collapse
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!
SheenaIsAPunkRocker said:
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!
Click to expand...
Click to collapse
Yes that will work! I used it cause I got lazy and didn't feel like changing the key file but it's much easier to use the green call key instead of the notification power widget
Sent from my GT-I9100 using Tapatalk
Try this:
Lock the screen normally, screen turns off.
To turn it on again by pressing any other screen buttons other than the power button.
I found that if I do it this way, the screen runs normal.
I don't know if I pressed the lock button while the active screen was activating or what.. but any time I tried to unlock the phone afterwards i was met with black screen.. but still got haptic feedback when pressing the area of the screen where the nav bar is.
i then held down the lock button to get the power menu (which i still couldnt see due to the black screen), tapped where i was guessing the power down button was, and then tried turning it back on, which worked.
hasnt happened since but it kinda scared me that it even happened in the first place and kinda pissed me off that a bug like this happened without any rooting ish being done.
Guys I have a question... when I talk on the phone (with speakers on so I leave it on the table), the screen goes black... the problem is that every time I want to turn the screen back on I actually have to use the power button... the home button doesnt work, it's blacked (even if i have set always on display to be active all the time).
Is there a way to turn the screen back on without pressing the power button? Or have the home button active even if the screen goes black during a phone call? thank you!
Anyone?
Home button should be active at all times, you may need to press hard, blindly in the right place but it should work at least it works on mine, no problem.
You sure? Your home button works even when you talk with speakers on and the screen turns black?
tharghan said:
You sure? Your home button works even when you talk with speakers on and the screen turns black?
Click to expand...
Click to collapse
Of course it works. Maybe it has some time out function, when it disables home button after certain time, I don't know since I never talk more than few min, but when screen goes blank, couple min later I press home button and it goes straight to talk screen bypassing lock. But I have location/BT set as secure, so it never locks up when I'm home, at work or in a car and have not test it much outside of those places. So if I had to make wild guess it's one of 3: 1. it has some time out 2. something with security lock 3. you're not pressing hard enough or wrong place, you really have to press hard, like you want bend screen a little.
My S6 did this also.
Some help?....
@tharghan
Same problem...
If anyone has a solution for this problem of black screen on speaker calls!?