Hi all,
i need your help.
I broke my htc touch screen yesterday.
My touch is password protected, i tried to logon but that don't work.
I want to keep all contacts so i can't do an hard reset.
Do you know how to reset my password, or a software that don't need password or any other solution?
Thanks you
- power off your device
- hold SEND and END (green and red) buttons
- Power on your phone
a black screen with some white text will appear. So you just hit ACTION (middle) button and its done
its the only way
if i do that i will lost my contacts. no?
Try "MyMobiler"
-darota-
Darota,
we can take control with mymobiler after unlock phone.
But i solved my problem.
I have a second htc touch on which I took the lcd screen
Thanks to all
Related
Hi, a helpfull friend has set the WM5 password to strong alphanumeric and has forgotten it,or just wont tell me what it is. Can anyone tell me, how can I get around this to get MDA Vario working again?
Many thanks
I think a hard reset may fix.
But I am not to sure.
I have tried that, device is still coming up with password request.
All I can think of is flashing it with a new ROM but if it goes bad it could kill the device and I am not sure it would remove it but in theory it should. Other members may have some hacks to fix it.
A hard reset will definitely remove the password, maybe you are just soft resetting the device.
I have tried as says in manual many times, it comes back up with the password screen every time.
I can only try it with MDA:
Turned off
Turned on with password screen illuminated
Manual says:
88 Managing Your MDA Vario
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command button on
the device.
2. Keep the two buttons pressed, and at the same time, use the stylus to lightly
press and hold the RESET button.
RESET button
Voice Command button
Comm Manager button
I have tried it with MDA:
turned off
turned on showing password screen
Sounds like you are doing the reset wrong....
Hard resets are awkward - hold in the two top side buttons, press the reset and keep holding the top two buttons after you have removed the stylus from the reset hole. About four seconds should do it.
Hope that helps.
you'll know if you got it because you'll get a black screen with white lettering that says "press send to format" or the like
otherwise its just a soft reset. On an older ipaq I had, if I had a password it would ask on teh PC everytime I synched. This was with PPC 2003. I'm not sure if you'll still have a problem when you try to sync your data though.
Good luck.
Bilbo_28 & others - You were right, I was not doing a hard reset properly and getting only the soft reset.
It seems after doing it a few times, that the hard reset instructions in the manual should read something like:
hold in the two top side buttons, both the send and receive buttons leds should come on and stay lit.
Insert the stylus in the reset hole and observe both send and receive buttons extinguish
remove the stylus from the reset hole and keep holding the two top side buttons until:
The screen goes black and the following message appears:
Press send to restore
factory default,
Other keys to quit
Release the top two side buttons
Then press SEND to restore factory default
or press any other key to abort hard reset
I think an e-mail to T-Mobile telling them to update the manual would not go amiss !!
Many thanks for your assistance.
Thankz man
hey thankz man really got a great relief
Wow. I was doing the hard reset wrong. I had the same password problem. But now its stuck on the "align screen" menu wth? It moves the cursor around the screen and yet it comes back to the menu. I've run through it at least 10 times now
I have a problem in touch screen, after to place the activation code for wm6.1 touch screen stoped " working" when I turn on trinity it asks for to tap in screen to setup windows mobile, but nothing happen and to turning off it is only possible with button OK
please help!
Knowledge
Knowledge makes humble, ignorance makes proud. / \./ \/\_ I Hand You __{^\_ _}_ ) }/^\ A Rose... / /\_/^\._}_/ // / ( (__{(@)}\__}.//_/__A___A__wow gold____A__wow gold_A______A____ \__/{/(_)\_} )\\ \\---v----V-----V--Y----v---Y----- ( (__)_)_/ )\ \> \__/ \__/\/\/
i dont fully understand your question but ive heard adding welcome.not to storage card will bypass screen alignment. alternatively this is my calibration data if you can enter it in the registry somehow: 504,519 222,220 221,817 793,812 783,217
problem solved:
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press SEND to restore factory default, press END to exit', if you press SEND Your device will be set back to factory default settings.than Press "OK" to boot
thanks to all
I've just got my HTC HD2 and after playing with it for while i set 4 digit password for the device as it turns on so it should ask for password.
After reseting and turning the fone on i couldn't manage to enter the password as i enter password it says WRong password or it doesn't even accept the password and remains on the password entering screen.
Any help to remove this password or deal with this issue plz.
Its just brand new fone.
plz help i am really stuck with this thing if u have post or anything regarding this just give me link i'll follow it please...
thanks in advance
HELP!!!
please help me out i am really in trouble ...
sorry for being noob but i really do need to unlock the screen.
thanks
dont delete ... plz
did you just install swype 3.9 ? it has an issue with screen passwords. look through the forum, first few pages there are a few current threads. I think its bad news though, hard reset time....
Code:
No i didn't install any software i just used the software that comes with the HTC HD2 it self and all i did is set put password wenever u turn off screen and turn back on.
and its annoying is there any way to remove this? plz help!
Performing a factory reset via settings
The most convenient way to do a factory reset is via the phone settings.
On the Home screen's Settings tab, tap Menu > All Settings > System > Clear Storage.
Enter 1234.
Tap YES to perform the reset, or tap NO to cancel the reset.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Well that did the job for me..... i suggest use it if u need it only!
it happened to me too
hd2 password lock is not reliable at all, it happened to me twice so far. very annoying. hard reset is the only solution.
Hi,
Got a problem, i dropped my phone and the bottom of the screen cracked. Now the phone is locked and because i can't use the touch screen , can't unlock it! anyway to get around this without reflashing?
Thanks
I guess some software can do this,dont rem names
like power control software?
Yes. Learned it the hard way! , instead of using the remote control , i did a hard reset , that got rid of the lock screen but now the dreaded screen calibration is where i got stuck on! But i guess i'm not the only one. One problem with the remote control software is that it doesn't react to screen calibration , so you have to delete welcome.lnk or welcome.exe from the windows/startup folder and that cleared it up.
Keyboard solution
I had this same problem when I cracked my screen on my xv6800.
The solution I used to unlock the phone is to:
1. flip open the keyboard
2. push the dash action button above the letter Q
3. push the button with the blue circle (character switch button?) next to the windows button.
4. push the letter V
Basically to unlock the phone tap unlock on the screen or if you screen is cracked hit the * button on the key board.
I hope this helps someone.
J
Hello to all of you... I have a Mega...I actived the wlan and my phone got stuck...I turned it off and now, when i turn it back on, it hangs on the 'insert pin' screen...i removed my simcard but the same happens...i click 'cancel' and I can see that wlan is still on..an my phone is still stuck..it doesn't connect via active sync, i can see only my sd-card...i have some cntacts i would like to save from the phone's memory, but if i can't do it, i will perform a hard reset..so i'm asking you...do you happen to know how to save my contatcs??? thanks!
After hours of searching, i found out what happened to my phone..It got "Newton's ring" (an oily rectangular shape in on the display)
http://forum.xda-developers.com/showthread.php?t=591292
And it's met on the Touch Pro, Diamond and others...
I think I'll send it to warranty...
I'm not really sure but you can try a hard reset:
Hard Reset
1. Power Off the phone.
2. Press Both Volume UP & DOWN Keys together.
3. Keeping the keys pressed, power up the phone.
4. The screen will display a message.
5. Press the Volume UP Key.