LG GM730 dosn't boot after some SPC installation - Windows Mobile Development and Hacking General

Hi, i don't know if this is the right place to ask but i realy need HELP!
My LG GM730 dosn't boot after i installed some SPC software, it just goes to the Vodafone logo and then it stays there.
i got now idea what to do, so if there's somebody out there that can help me, that would be great.
Thanks

Have you tried doing either a soft or hard reset?

Related

phone wont boot into boot screen :(

hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
garethmob said:
hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
Click to expand...
Click to collapse
Hi, and welcome to the forum. (See! I was nice!)
Telling us that 'something went wrong' isn't really enough for us to go on.
You need to describe exactly what happens to your Ameo when you power it up, so we can give the correct advice. What do you see on the screen?
sorry lol
when i do the hard reset it does the usb boot screen but goes to a gray screen that asks me to format microdrive and then flash it. i think the op system been wipped but i cant get it to the rainbow usb boot screen for active sync to fix it
You can get it into bootloader mode by holding down the comm manager and camera buttons, then soft resetting.
From there you can re-install WM6. If you didn't succeed in unlocking the unit, you'll need to use the T-Mo compatible version of WM6 which you can find here - http://uploaded.to/?id=wbbw2u

Killed Wizard! Need Help!!

My wizard freezes at splash screen.
I can start it in boot loader and install a new Rom, i´ve tried Wizard Love and still couldn´t make it work.
For last i tried a original one, WWE from UK Vodafone), but after reset, frezzes in the same place.
Could it be a processor problem? I dont´t think so, because it is working but i just don´t know what else to do...
Please help!!
With the wizard_love rom, i flashed it in my device, it starts up after doing this, but stops at splash screen.
I am a total newb but out of curiosity, how long have you let it sit at the splash screen before calling it?
hello
could you first explain what u did? that caused this, or did it just happened al of the sudden?
It all started in the morning, i try to turn it on and it just stoped in the splash screen like i said.
I just don´t know what else to do.
I had the same problem yesterday. Tried a lot to let my phone work again. It worked after I started the phone pluged to the charger. I hope It works for you.
BTW. in my situation it just started from out of nothing.
I´m Able To Say My Problem Is Solved!!!
Thanks to Drug Store, i solved it!!
CID unlocked it, it was necessary to copy OS to SD card!
Just followed his indications!
Very easy!
Thank´s a lot man!!
IT LIVES!!!

6915 not restarting....

Hi
Could anyone help? Please .....!!
My 6915 is showing a screen with Serial at the top, HP logo in middle and VG. 39 at the bottom.
Tried to do a hard restart........ all it says clearing OK as long as i hold the buttons and when i let it go .... abck to the above screen.
Anyone ..........any ideas.....
I am
http://forum.xda-developers.com/showthread.php?t=309357
or try this
http://rapidshare.com/files/79967276/_EXE_ROM_FOR_G3_DEVICE_ONLY.rar.html
http://rapidshare.com/files/79965670/_EXE_ROM_FOR_G4_DEVICE_ONLY_.zip.html
good luck
good luck..
u 6915 stucked in bootloader mode..now get appropriate rom upgrade and flash it..then only it will work..
Thanks....
Thanks a lot
First it won't load , but at the end it did work
Cheers
6915 phone problem
Thanks for help to get out from from the bootloader mode but now after restarting, it is saying no GSM during startup and the phone stop working... anyone help

Problem with HW6925 stuck in Bootloader :(

I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Is the bootloader stuck in Serial or USB? If Serial, take out battery, let the screen fade away until you barely see the HP logo, put battery back in along with cover, dock the PDA with power, it should change back to USB. Download the rom from HP website, 6945 should work, and flash.
Join the Club
absolutn said:
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Click to expand...
Click to collapse
Here is how to get it out of HP Invent Logo, G.39 .......
soft reset, do not connect yet
press ctrl, alt delete, if on xp, find process wcescomm........., end that process if it is running. plug in data cable for our $600.00 Paperweight, It should now say "USB" instead of "SERIAL" on the hw6925........, now run mtty,
change the port to that w one, you know the one one, if not its the one that does not say comm, or just click on usb to the right, if there is one, next when it opens up the new screen, it should say something like "USB>"
type, " set 14 0 "
now soft reset hw6925,
Should go back to Booting up normally, now for people like me with the "NO GSM AT Startup, we are F"C"ED
someone i change the model number on my hw6925 to a 6915, still no gsm, any of you programmers want to help us out, please do, I will be the first to donate

[Q] Stucked in Start Logo Screen. How to solve?

Hi guys!
While browsing over the internet my phone simple restarted. But this time, it is stucked into the Samsung Omnia 7 logo. I tried removing the battery and nothing. Also, Zune does not recognize it since OS does not start.
I've tried to do hard reboot. Nothing. Also, I tried to enter in download mode, and flash it. The flshing process was perfect and complete, but after all, my phone is still stucked into the start screen. I don't know what else can I do.
Any ideas?
Do you have 8 or 16GB version? Some weird pattern is starting to show up ).
And what ROM did you flash?
I have the 8GB version.... I flashed that one in the guide you guys suggested here in XDA.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Omnia_7#Accessing_Download_Mode
Should I try any other? Do you have any suggestion?
You should try the latest one. Or the UK unbranded one.
I'll do that.... Do you know where can I find the uk unbranded?
Just did flash with two more ROMs. Nothing.
I don't know what else more I can do. I'm frustrated.
warranty replacement :/.
hi i have an coby kyros mid8048-8 after an rom update my table stucks on start logo menu i cant do anything i try to get to factory reset menu but it donty work pls help tnks.

Categories

Resources