Related
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out
one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)
guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.
i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest
update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??
You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.
Where can i get a radio stack rom...???
Click to expand...
Click to collapse
where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???
Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:
get a radio stack from here
http://lumpistefan.dyndns.org/tools/
Latest update: http://forum.xda-developers.com/viewtopic.php?p=363228#363228
Let me first say: I am unsure if my SIM is now unlocked and if it has a CID check. Therefore I'm unsure if the info in the related topic http://forum.xda-developers.com/viewtopic.php?t=62496 applies. Therefore I'm posting this new topic.
I recently got a Orange SPV M600 which as far as I understand is a HTC Prophet. I am totally new to PDAs but wanting to use it with my T-Mobile sim and with a fair amount of computer knowledge on board decided to unlock it myself using imei-check.co.uk/m600unlock.php
I ran the program and it said the sim was succesfully unlocked. However when I tried to power on the device after that, it was stuck at the 3 color screen only displaying the values:
IPL 2.10.0001
SPL 2.10.0001
This gave me quite a scare because the device is brand new. Soft and hard reboot bring me back to the same screen. This morning I tried running the tool again and the unlocked failed giving me a message that key / imei do not match. After rebooting it now also shows the value RUU at the upper right corner of the screen.
I read some of the posts on this forum and did a little research on Google. I think I know what my next steps should be but I'm terrified to toast my M600.. I already fell in love with it! Could you guys give me feedback before I try the following?
* Download and unzip:
xda:[email protected]/Prophet/Shipped_Complete_Updates/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
* Follow the steps on http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Should that work?
PS: what does the RUU value mean and why did it appear after my 2nd try?
Thanks in advance guys!
Have you tried contacting IMEI-check's support?
RUU is. IIRC, radio unit upgrade and it should not have appeared.
Don't flash the rom, you might need to send it back to orange / HTC and there is no official orange downloadable rom as yet so if the device boots to 'dopod' or whatever they'll know you've messed with it. If the key does not match sounds like the unlocking has screwed your imei. Does the IMEI the app now recognises match the one you paid for the unlock for or the one on the back of the unit/ box?
Richard
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
MeneerPaul said:
IMEI-check support:
The unlock has nothing to do with your device problem. You say yourself that it already turned on directly to 3 color screen after you switched it off (sometimes this happens due to problems in HTC flash driver). For a firmware flash you don't need Orange. You can do this on your computer at home.
Both the soft and the hard reset bring me back to the same 3 color screen..
Click to expand...
Click to collapse
Typically helpful....
I do not think it co-incidence that you are doing a flash operation ( unlocking) and now the device will not boot. It should reboot after unlocking according to their documentation and if it went to the tri-colour screen something was amiss after the unlocking then, quite possibly becuase of it. The unlock completed succesfully the first time then?
Don't flash the dopod rom, if the IMEI now has a mis-match you may need to send it back to orange for repair / reflashing. They will be able to tell if there is a dopod rom on there and may refuse warranty - I wouldn't mention the unlocking if I were you. There is no official orange rom you can try :-(
Richard
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
MeneerPaul said:
I do not have a receipt for the phone.. is the ROM at least the one I should try if I do try one?
Click to expand...
Click to collapse
In the UK at least you do not need a receipt for the phone - it is based on seriel number.
http://service.htceurope.com/
Once you have tried flashing the other roms they can tell you have been flashing it and may not give warranty service, but hopefully all it really needs is a rom anyway. My warning is just in case it is not the rom that is the issue and you need to send it back.
When you run imei-check's app now what IMEI does it give for the device?
Richard
Good question, I just checked and the IMEI in their tool gives me the same one as I wrote down before the operation. It is the same as on the box and as the one I payed for to get the key for and used the first time around.
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
MeneerPaul said:
I hoped the flash would solve my problems and I tried flashing the M600 with the ROM mentioned above. 100% completed and all looked good until the reboot.. Again it will not go further then the tri-color screen with the exception that the SPL version has changed:
IPL 2.10.0001
SPL 2.15.0001
Anything left to try?
Click to expand...
Click to collapse
Get back to IMEI-check and ask for more help? They may claim that the unit was faulty before unlocking but if so how could the unlocker run? Or try posting at www.modaco.com to see if anyone there has any ideas.
Which country was the device supplied in? Did you check the seriel in the link I gave? If it's from the UK you could send to a friend or collegue to return under warranty without paperwork ;-)
Sorry.
Richard
Well at least we made progress, a hard reset now let's the device boot but.. after I went through the settings I pressed start and it automaticly powered off.
I then inserted my T-Mobile simcard and rebooted again to find myself in the tri-color screen. Another hard reset once again let me reboot but during the boot of Windows Windows it says 'Data crashes. Please contact your service center.'
Where in the Netherlands do you live?
I have succesfully dopotted two M600 phones and I have had one repaired by Orange, for broken speaker. They did not seem to care that I flashed it to dopod.
I might be able to help you out on this one.
send me an e-mail on [email protected]
Thanks,
Robin
O, and I unlocked both also....
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
chowdary said:
hi
i have got a same situation as mentioned in the first post, i recieved an spv m600 today
some body has tried to unlock it and now the phone is stuck 3 colour screen
so is there any solution for it yet?
thanks in advance
br
Click to expand...
Click to collapse
How did they try to unlock it?
Richard
hi
i couldn't speak to the guy who tried to unlock it, i spoke to his collegue and all he could say is that he tried to unlock by logs
now he couldn't tell me what did he use
i have tried to hard reset it but it comes back on that screen
:? :? :?
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
robincop deel 2 said:
Try to load the no id DOPOD ROM.
This one will install when the M600 is in that 3 colour screen.
I did it and it worked for me.
I tried to CID unlock with a tool that contained a specific WARNING NOT TO USE for a certain ROM version, which of course I did anyway.
The warning was correct. My M600 was stuck.
By reflashing I resolved the problem.
You can always bring it back to Orange and claim that this happened after you've let the battery go dead; you did not get a chance to charge on your 1,5 month holiday ..........
Good luck!
Click to expand...
Click to collapse
thanks for your reply
it will be very helpfull if u could give us the link to download this file
as i am new with pdas
thanks
Read the prophet forum. You will find the link there in a few seconds.
Success
after doing search this is what i found
RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
please could u tell me if that is ok to flash
the other thing is i can't connect to the pc
active sync is not picking up
phone is stuck in three colour screen
and all i can c is
IPL 2.10.0001
SPL 2.10.0001
any idea for that
THANKS
you should load:
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
rranjaa said:
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
Click to expand...
Click to collapse
Try to get the phone into bootloader and flash the orignal shipped rom and for gods sake and for the sake of your expensive handset read the post by our moderator meschle right at the top before even attempting to flash.Hopefully you may retreive it.
My prob is bootloader
the bootloader when invoked says searching for sd card but then it goes to a tri color band display n nothing happenes
does anyone has some advice
is this boot loader can be invoked from desktop using the prog (mtty.exe)mentioned in ur forums (im not IT savvy)
Please help
is ur phone cid unlocked? try t-mob. shipped rom. it helped lot of people
Even I get the t-mob rom how do I flash it? thats my problem
for god sake use search. read wiki. here is at least dozen of threads like yours
I am searching thru forums but no answer
Tried some steps using mtty.exe as advised in forums but nothing happening
Sitting in front of the computer straight 19 hrs but in vein
Its Alive
Hi I would like to inform very happyly My dopod p800w is alive.
Yap managed to restore it with original shipped ROM.
Actually I was trying to flash it from SD card which I couldn't with out knowing I can connect USB cable when it is in bootloader tri color band and straight away start by double clicking the EXEfile of original ROM
After PHsnake told me to search I found this thread http://www.spv-developers.com/forum/archive/index.php?t-469.html
and these instructions
Arc
07-25-2005, 01:12 PM
1)Disconnect from USB cable
2) switch off telephone
3)hold CAMERA key (key on right side of phone)will start in 3 color mode
4)plug in USB cable
5)start ROMUpdateUtility.exe and follow instructions
which I followed in my Dopod P800W and damn it it worked. So happy. Nice to get stuck and find a way out of it. Wish all of u happy Tappings. Thank u
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Try going on HTC's website and asking their support staff if they will repair it under the general warranty?
Yeah I've emailed HTC but of a language barrier. Kept mentioning to return to my dealer, however I didn't buy it from a dealer. Will see how I go.
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
johna8 said:
Hi all,
Bought a brand new HTC Trophy from an auction site but has no warranty.
Going to contact HTC to see if they can provide some type of support.
Downloaded Zune and updated the phone fine the first time. It then mentioned another update was available so went through the process.
The last screen on the update said : Waiting for phone to reboot.
Now I watched the phone for over 30 minutes and it was stuck/frozen on the HTC logo when powering on so I switched this off thinking something had happened.
Now I'm unable to even power on the unit, factory hard reset or anything. Has anyone experienced this before?
Regards,
John
Click to expand...
Click to collapse
Howdy, I am in the same boat. My HTC Trophy (Verizon brand) comes on and goes to the bootloader screen with red, green, blue and white and thats all it will do. It doesn't even show it's charging. How do I get a rom on this device? I have tried somse roms from ansar but none work> this is actually how it got to **** state of a paper weight. Can someone walk me through step by step how to get my phone working. Thanks
prootc1 said:
Hello,
Make a gold card with the Y cable and unbrand the Trophy, and then put other ROM in it, it will work with Y cable process.
Regards
Click to expand...
Click to collapse
Hi prootc1, you sure? I can't even power on the phone at all. Nothing comes on the screen - it's like a 100% brick with no response?
what is gold card? how can i get an original rom for htc trophy for verizon? phone is stuck in the color screen.
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Any news?
Any news ? I'm exactly in the same case than you Johna... Please give us a feedback...
prootc1 said:
Hello,
I already test on a sticky logo Trophy, and it work.
You need:
1- a Y cable (make or buy one),
2- download the original and oldest ROM for it,
3- Make the gold card to unbrand it and do the process
It should work, say something...
Regards
Click to expand...
Click to collapse
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Hi Prootc1, my phone initially had a stuck HTC logo and was forced to power it off. Since then, the phone will not respond to any keys / power on at all. It's pretty much 100% bricked with no responses/leds/lights emitting.
Click to expand...
Click to collapse
I have the exact same issue
I'm wondering if I do find a repair service that offers JTAG, may be the only way? but this is assuming the phone can be switched off to reflash?
Click to expand...
Click to collapse
Is it possible to do it ourselves?
Anyways an update is that I've taken it to our local comms provider who are sending it away for service. Will hear back whether it's under warranty or not.
Click to expand...
Click to collapse
I've send an email to HTC to describe the case, hope they'll answer soon.
I keep you informed...
hello,
can anyone put in threecolor mode? bootloader?
If yes, then use these instructions.
http://forum.xda-developers.com/showthread.php?p=10176994#post10176994
Regards
can anyone put in threecolor mode? bootloader?
Click to expand...
Click to collapse
No
I guess it's hopeless
Thank's for your help prootc1
Was sent away and have a replaced phone.
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
ansar rom problem
Hi Ansar, I have a problem since I did a soft reset htc setting the trophy to leave the factory, made a number of actions to restart, and stayed frozen in the picture there is no step HTC.
Well I'm from Spain to investigate it and I said I'll install the official rom Vodafone Spain
9_22.32.50.10U_by_ansar RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.2
While the flash starts but when it comes to 10%, I get a message Flash Write Error (# 226) @ 12%
and there is no progress, and researched and found this
ERROR [226]: FILE WRITE
This Could Indicate That the downloaded image (. Nbh file) is corrupt, re-download the image.
and I downloaded the image again but nothing
some solution concept .????? thanks from Spain
LEFTKOYL said:
Hi, I have boot issues with trophy stuck at boot HTC white screen and nothing else.
When it starts make 4 times vibrate and then nothing.
I can access the 3 color mode but I have try to update and can't connect to pc.
Click to expand...
Click to collapse
Hey LEFTKOYL,
Can you try the RSPL/HSPL tool?
I've given WickedPenguin a guide which should help you (assuming your on the correct boot loader version)...Get that tri color screen and note down the SPL details.
http://forum.xda-developers.com/showthread.php?t=1207721
I too am having the multi-color screen appearing. I plugged my phone into my computer last night for the first time and it said there was an update. I left it running and came back to a 'failed update' message and this screen. From the pieces I have gathered, from reading in the developer section, it appears I am hosed. There is not a SPL unlock for my model of the Trophy, which apparently goes by the name 'SparkW for Verzion' as well. This was not a pleasent way to start my day.
use this method by ansar
Use this method by Ansar ..
http://forum.xda-developers.com/showthread.php?t=1000656
not that the method are the same but if you are not using HTC vodafone France you can use a different rom from here
http://forum.xda-developers.com/wiki/HTC_Trophy/Shipped_Roms
you can also try the Gold card method too...
If your phone is completely dead .. you can do JTAG brick repair .. if you want someone to do it for you ..you go to mobileTechvideos here :
http://mobiletechvideos.mybigcommerce.com/
you can also use the gold card method here too :
http://forum.xda-developers.com/showthread.php?t=893152
Hope any of this works for you
Enjoy
You can bye me a $2 beer
here https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YWB555YTP6Z42