Database Users

desperated

hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!

does anyone has a clue of whats going on???

i really need some help here please!!

there are some progs on wiki. Instructions for those stuck on bootscreen.

i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?

help help help : htcp3600 :Trinity_0407_bepe_0.79_Full

Hi,
i installed that new Rom for my htc p3600, and it worked fine.. some minutes after that the screen went black.. i made a softrestart from that small button with the styles.. the trinity started, but stopped on the screen with : smart mobility... that black screen after the moving HTC logo... and nothing happend...
it is just stuck there..
after many restarts i thought i would re install the rom, but the pc can't see the device any more... the redlighted led is on when i plug the device to the pc, but still nothing happening..
the device is just stuck... doesn't go in to the system,, doesn't accept new instalation from the pc...
and all my work is stopped...
i have backup for my data, but i need to use my device.. please please.. help help help.. very fast..........
thank you..

Boot loader
i think may be it will help you if you get in BootLoader Mode ( by pressing the Camera Button and the Off Button )
then during the device in the boot loader mode try to connect it to your PC and try to flash another rom
GOD help you

What's your bootloader details?

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.

Thx all of ya , problem solved.

sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.

gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.

Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss

Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

SOS - Universal on death bed , No Bootloader - Help him please

*First I , open the threat under upgrade , no response yet , so trying here , i need help badly *
Hi Guys,
My HTC Universal is almost dead
I had Tomal v12 ROM, tried to install Almost2 ROM, but it stuck on Splash screen , after reflashing several other ROMs problem remained there. also tried MTTY app and enter to bootload and flushed Tomal rom again.
bottom result. now i can't see any thing on my screen , even i cant enter to BootLoader screen by pressing keys.
Screen is totaly black at moment and usb connected to it does not recoginize it as valid device.
Please help me how to come out from this.. and get back my device back working.
how can i enter to bootloader from sd card.?
any help would be appericiated.
Regards,
Khurram

Have a read on my signature link and search for ROM flash from SD/MMC
Hope it helps,

Thanks for direction
i am going towards it , btw are you sure it will be flashed when device is not responsive even no bootloader

Khurram said:
*First I , open the threat under upgrade , no response yet , so trying here , i need help badly *
Hi Guys,
My HTC Universal is almost dead
I had Tomal v12 ROM, tried to install Almost2 ROM, but it stuck on Splash screen , after reflashing several other ROMs problem remained there. also tried MTTY app and enter to bootload and flushed Tomal rom again.
bottom result. now i can't see any thing on my screen , even i cant enter to BootLoader screen by pressing keys.
Screen is totaly black at moment and usb connected to it does not recoginize it as valid device.
Please help me how to come out from this.. and get back my device back working.
how can i enter to bootloader from sd card.?
any help would be appericiated.
Regards,
Khurram
Click to expand...
Click to collapse
The same thing is happening with my HTC Incredible S
any fixes??

[Q] PLZ Help ME PlZ my phone goes to the BOOTLOADER and nothing else happens

PLZ Help ME PlZ my phone goes to the BOOTLOADER and nothing else happens i cant flash a ROM neither i can use my phn if i press the power button my phn doesnt power on i have to kep the camera button pressed and then press the reset button so i get the boot loader screen if i try the hard reset i.e press the reset button while holding the calling key/END ket its goes to the "smart mobility" screen and nothin happens . . .i have IPL 3.14.0002 and SPL 3.14.cmon on the bootloader screen and USB on the left bottom corner. ..guys plz help Plzzzzzz. . ..while i try to flash a new rom i get a "ERROR 322". .. .. .can u plz help
i also tried diffrent diffrent USPL but it doesnt work even flashing ROM anything i try to do it goes to 2% and i get an Error and the phone goes off

Guys please help me guys i am really in need and would really appreciate your help

i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive

akash.s said:
i am too having the same problem when i press the power button the screen displays "smart mobility " and nothing and get switched off again else plz help me or tell me how to reset or any other trick to make my mobile come alive
Click to expand...
Click to collapse
hi,
can u explain abit when and how it happened//What about the battery status?about ur IPL,SPL ??

battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me

akash.s said:
battery is in a good condition
ipl 2.20.2220
slp 2.28.0000
please help me one more thing when i am trying to boot from a sd card it shows invalid certificate plz help me
Click to expand...
Click to collapse
hi but u have mentioned SPL 3.14 in ur earlier post??.2.28.00 means ur phone may be locked.and u cannot flash other custom Roms,check this link u may get help http://forum.xda-developers.com/showthread.php?t=406721
battery condition means wheather the battery is charged more than 50% ??
bye

try installin hard spl 3.10 and after that install onyx rom.
Your problem may be solved