Hi all,
I'm having a problem with my Wizard that can't connect with my Deluo
Bluetooth GPS.
I already deleted and started again the connection considering the passphrase.
The GPS appears @ Smartphone's device list, but they keep connected just for a few secondes and then they lost the connection.
Even with the navigation software, the connection doesn't work.
What's happening ?
I'm using Hornet Manilla 4.5 Rom.
Tks in advance.
Regards,
Cássio
Hello everybody,
I forgot one info regarding my Smartphone and the bluetooth connection:
I have a Jabra hearphone and it works very well bluetooth connected.
So it means that Wizard bluetooth connection works and I believe that it indicates that GPS bluetooth connection doesn't works properly.
Is it possible a bluetooth protocol problem ?
Is there any other source to be contacted in order to solve my problem ?
I live in Brazil and I could'nt fins Deluo web site. Does it still exist in US ?
Tks in advance.
Cássio
cassio gebara said:
Hello everybody,
I forgot one info regarding my Smartphone and the bluetooth connection:
I have a Jabra hearphone and it works very well bluetooth connected.
So it means that Wizard bluetooth connection works and I believe that it indicates that GPS bluetooth connection doesn't works properly.
Is it possible a bluetooth protocol problem ?
Is there any other source to be contacted in order to solve my problem ?
I live in Brazil and I could'nt fins Deluo web site. Does it still exist in US ?
Tks in advance.
Cássio
Click to expand...
Click to collapse
indeed... the bt can be used with earphones, etc.
impossible with gps i think no one can solve it, im with the same issue about some months (3,4 dont remember)
go back to 6.1 i already did it
Related
anyone has the same problem ?
When I'm using TomTom 5 as navigator and i receive or make a phone call, the navigator stops everything and when a finished my phone call everything comes back again.
Why ?????
I have the same and I thought it was normal beacuse the bt can handle only one device, isn't it?
No
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Re: No
filippino said:
You are wrong because usually bluetooth allow only 1 connection per time of different kind!
For example 1 voice connection to the carkit and 1 data connection to the gps!
Before I had a Nokia 6630 and everything worked perfectly !
Post your appreciated comments!
Bye
Click to expand...
Click to collapse
In fact, I did manage to get 3 connections (GPS, Headset, ActiveSync) at one time w/o problem.
To answer yr original question, my Tomtom 5.0 works fine on phone call.
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
Help
So can you help me to solve my problem ?
I have an IMate Jam with Rom 1.11 italian,
what's your version ??
Maybe you have updated the bluetooth stack ?
Thanx !
BTW, I am using GPS Gate all the time so that I can open 2 GPS software (TT and Routis 2). Maybe that's another reason I didn't have problem.
I have the same problem.
I am using i TREK GPS and Jabra 800.
When im navigating, and in the middle I receieve a phone call, the GPS connection hangs even after the phone call ends.
I usualy make a SR after that and continue navigating.
What is the problem??
Thank you
Same story is with my MDA T-Mobile Compact:
EVERY (I stress it) EVERY time I use it with Jabra BT-800 and GPS receiver BT-338 when OziExplorerCE is on for a short time suddenly Ozi hangs. I try to restart it - no way, when BT option is touched, Magician says: NO BT HARDWARE ON THIS DEVICE INSTALLED. Only SR (sometimes even only HR) helps.
Tried to use JAM_Bluetooth_No_Hardware_Patch-1.CAB - it does not help.
Is there a solution? GURU, wake up, please!
Same sad story. This time it's about PocketGPSMoscow software, GPS BT-338 and SBH-100 BT Hand-free.
Every time there is an incoming call, the device looses BT connection to the GPS module.
Turning BT on and off does help,but doesn't bring much comfort. I hope this is not the BT-338 problem.
Should anyone have any bright ideas on how to find a solution to the problem, many will be very greateful.
It's strange. I really doesn't have any problem w/ my Imate Jam (flashed w/ O2 Traditional Chinese 1.11 rom) using my TomTom BT GPS w/ Sony HBH 600 BT headset.
Maybe you guys can try the following to see if it works. (for rom of 1.11 or later)
1. pair yr GPS w/ the pda.
2. In BT Com port setting, make sure both incoming port for Com4 and outgoing port for Com5 is check
3. Install GPSGate, set input port as Com5 and create virtual port Com6
4. Uninstall TomTom BT GPS driver since U doesn't need it at all
5. In TomTom GPS setting, choose "Other GPS" and choose "Franson VSerial Com6"
Let me know if this works 4 U or not.
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
If you ask me : the problem isn't with your BT but with the phone.
I only use an GPS BT receiver and if somebody calls me, i pick up the phone and also then the GPS disconnects until the call ended ...
zoom21 said:
Anybody try to upgrate/downgrate the rom version? One man in GSM service said, that BT doesn't work propriety with LEng Keybord install to 1.11 version rom. M.b. with TomTom thу same problem?
Click to expand...
Click to collapse
I've got 1.12 and I'm sure GSM is not involved - BT is the dead fish.
Every time I have a BT connection with Jabra and BT-338 simultaneously, EVEN when there is NO incoming calls, BT + GPS hang the Magician.
Unfortunately I do not remember if this bug happens when Only BT-338 is connected. Will check and report.
Hi People!
My first message at this board!
I hope you can help me solving the following problem:
I can not establish a Bluetooth connection between the O2 XDA Mini S and the Adapt AD-500 GPS Bluetooth Mouse.
The GPS Receiver is detected by the Wizard but with an "?" in front of its name.
The Bluetooth key is accepted and i made in and outgoing comports but the connection is still not funktioning (no connection recognized by the GPS receiver).
I looked in the WM 5 help on the wizard and it told to do some changes in the settings / gps menue. But there is no gps menue!
Is it because i have no navigation software installed till now? For me it sounds that WM 5 has this gps menue regularly but i can not find it in the settings.
It would be very nice if someone could help me connecting the receiver to my wizard because i dont know how to go on.
Heeelllllpppp!
Kind regards
Carsten
Hi all. I've used my Qtek with TOMTOM and a bluetooth GPS antenna for many time. Some days ago, the system don't run anymore.
The problem is in the Universal Bluetooth: I can find and add bluetooth devices but, when i use it, there is not communication. So, for example, i can connect my Universal with GPS antenna in the bluetooth section, but TOMTOM tell me that there isn't a GPS antenna. Also, i can link via bluetooth my Universal with the notebook, but i cannot start an Activesynk session via bluetooth: it tell me that no pcs are connected even if in the bluetooth list there is my pc and in the service list there is "activesynk" and it is activated.
Now, it is a software or an hardware problem? Any idea? I've anjlurned my software at the AKU 3.2 last italian ROM, but it didn't help.
Thanks in andvance for the help and sorry for my english.
Idum
UP
Pls help me. In what manner i can test if it is an hardware problem or only a software problem?
Idum
I have same problem ...
but still dont know the way how to fix
First
For TT to work with your bt gps you have to create a unsecured incoming port, take COM0 or any other number.
then it should already work in TT, if it not select in TT a GPS receiver and select com0
You have to create a com port for the BT connection and enable that com port in your AS on your pc.
To sync with AS over BT you have to select Connect with BT on your Device!!!
okay so here goes.
i have a S200 (Prophet)
ROM: RUU_Prophet_2151327_22113102_022021_Dopod_PDAMobizEdition_v101
Radio: 1_02.20.21
Protocol: 4.1.13.9
ExtROM: 2.21.13.102
i have been trying to get my Prophet to work with a bluetooth Pan network. The PC is setup to do it but the phone has no support for it or i just cant seem to get it working. can some one plz help to to solve this problem.
Thanks
as far as I know, the prophet does not support the bluetooth pan profile
http://www.clubimate.com/t-DETAILS_JAMIN.aspx
thanks for the info.
so is there no rom for the Prophet that supports the bluetooth pan profile?
or bluetooth driver updates or a another way it can be done it can be done?
i am also having problems using active sync with my bluetooth cant seem to get it right i am still reeding some of the posts here hope fully i can sort this out soon.
It is available in AKU3.2 ROMs and I use it successfully in my car PC.
PDAMobiz_Prophet_WM5AKU3.2_v3231.exe
is this the right one ?
That one and any of the 3.2 ROMs. But note that there are problems with these ROMs including the problem that the phone won't charge over USB (you have to use the main plug-in charger).
Good luck with it.
Tried one and the phone got stuck on the boot Screen just loaded the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe againe and i will try the other one againe now. Hope i get this sorted out LOL with out making a brick out of my Prophet.
GR8 the update is installed and now lets see what works and what does not work ...
Franscois said:
thanks for your reply on my post. I installed the ROM so far every thing is going well. all except that i cant get the PDA to connect to the PAN service.........
do you have any more information that might help ?
sorry to bother
Click to expand...
Click to collapse
Hi, I checked it again last night. I am using the AKU3.3 now, and this works too. My Bluetooth adaptor is a Belkin USB model and I am using the latest Widcomm 5.xxx.xxx drivers.
I start by using the Internet Sharing program on the Prophet, select Bluetooth PAN, the correct GPRS profile (in my case Orange Internet) and connect. Then I connect the PC using Bluetooth to the Bluetooth LAN on the Prophet.
Hope you can get it to work for you, but it may be also dependent on using a suitable Bluetooth stack in Windows.
The Widcomm drivers don't seem to work with my blue tooth adapter. so i have to use BlueSolei, or the windows drivers. the other thing is i wanted my Prophet to use my home networks internet witch is exactly the opposite of what you did in the above post, what i learned is that your bluetooth drivers must support the hosting side of the connection. The Widcomm drivers do support it but i just cant get them to work with the bluetooth device i have.
it looks like i have to buy a new bluetooth adapter if i want to get it to work....
or see if i can get the Widcomm drivers to work with my adapter.
any other way i can do this ?
Hi. Could someone confirms that Bluesoleil drivers runs ok in S200? Thanks and regards.
Hello all, I have upgraded to Sharps 4.0 but the bluetooth in teh car still does not work. Carkit finds the phone and calls to connect, however there is no answer from the phone to give the code.
Can any body help. This did not work with original WM5 from T-Mobile and still does not work wit WM6
Thanks in advance for the answer to solve this problem
I have a similar problem with my TyTN and Pioneer DEH-P75BT, and i found this post...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=P75BT
With this changes in registry, my TyTN connect with headunit tottaly correct.