hello guys, i downloaded the WMDC today n i plugged in my hd2 on my laptop (vista) and WMDC doesn't recognize my device it says it is "not connected" and i saw a video on youtube how to flash your hd2 and that guy plugged in his hd2 and WMDC recognized it and it doesnt work for me.. any suggestions? i need help please.
thank you.
Related
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, this issue has been known since the beginning of HD2 using win 7 or vista. There is a thread duscussing about that, but unfortunately I forget the link for that.
I also use win 7 64 bit and I experienced that too.
What I did to solve it was turning off my phone and leave it for a while (at least 5 minutes) and also turn off my pc.
After that i turn it on again the pc and the phone and plug the phone to different usb port. It works.
If you still have problem, you can try to reinstall windows mobile center.
goodluck
Guys
this morning i wanted to try a new rom and did task 29 and reinstall the radio and magldr 1.13 , and when i conected the phone via flasher mode it dosnt connect with the computer the strange thing is it connect via mas storage, i can flash win mobile which i did so my cable works, but I cant flash any android or win phone 7 ,,,i recently formatted my Pc besides that i could do it without any issue earlier what could be the problem
Damn it i cant flash anything via MGLDR it doesn't get connected only WIN Mobile 6.5
Hi, I would think that the problem is that you have formatted your pc, so you don't have ADB installed. Install Android SDK and you will get ADB support.
Thanx , i will try thanx a lot
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
nishanthabgw said:
I didn't managed to get it done i installed the SDK but no luck can some one pls help me to get my phone connected vis usb to MGLDR
Click to expand...
Click to collapse
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
malybru said:
Hi,
You are missing the drivers that come from ActiveSync in XP or WMDC in Windows 7.
Install whichever is appropriate for you and see if that works.
Click to expand...
Click to collapse
thanx will try nw
Hey everyone!
I've searched the board, but I did not find anything releavant to my issue.
I've been trying to put Clockwork into my magdlr by running the DAF.exe, my HD2 is in USB flasher mode, but DAF.exe pops up and says it needs "RAPI.dll" to run. After that, it's unable to establish a connection to my device.
RAPI.dll is a part of active sync, which is not available for Windows 7, so what can I do to establish a connection to my device?
Thanks in advance
Best regards
panxter
the windows mobile device centre that ships with win 7 isn't the latest.
http://support.microsoft.com/kb/931937
install again from there, reboot phone and pc, and try again.
samsamuel said:
the windows mobile device centre that ships with win 7 isn't the latest.
http://support.microsoft.com/kb/931937
install again from there, reboot phone and pc, and try again.
Click to expand...
Click to collapse
After validating, it takes me back to the frontpage.. no download. Oh stupid microsoft-website! grr!
.
RE: found a dl somewhere else, same version, I'll get back to you after a reboot
Hi mates! Help me please if you know the answer. The point of my trouble is that i have DFT freedom rom v1 on my omnia7 and I cant`t connect to zune. When I plug my phone into pc via usb cable zune states that thereis connection error and the phone should be restarted. Please tell me how can i solve this trouble, or may be thereis another way to get syncronization work. Thank you.