Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, this issue has been known since the beginning of HD2 using win 7 or vista. There is a thread duscussing about that, but unfortunately I forget the link for that.
I also use win 7 64 bit and I experienced that too.
What I did to solve it was turning off my phone and leave it for a while (at least 5 minutes) and also turn off my pc.
After that i turn it on again the pc and the phone and plug the phone to different usb port. It works.
If you still have problem, you can try to reinstall windows mobile center.
goodluck
Related
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Hi I am running Open Touch 7.7 by ttran on my t-mobile wing.
Unfortunately, whenever I connect the phone to my PC via usb all I hear is a the usb connection sound twice and the device is not picked up at all(I cannot access it in My Computer).
I have tried multiple usb cables and used a computer running Windows XP and a computer running Windows 7 (beta). My phone used to connect just fine, which is how i got open touch onto it, but now i can't seem to get it connect to my PC at all. I tried hard-resetting my phone but it did not help.
Any suggestions on how to fix this problem?
reflash
I had the same problem too with this ROM. The only way I could get a connection again was to reflash the ROM. This happened a couple times before I gave up on it and installed a pdaviet rom. Now, I'm currently using (16.03.09) - Herald 6.1 Rom -5.2.20757.1400 which is running very well.
Good luck.
try logging off or restarting computer. For some reason if I can't connect with this rom, that works every time
hey i know how to flash a ROM with my sd card (thanks to ivan's guide) but i dont know how to Hard Spl without pc connection which is needed to flash a rom with a micro sd!
EDIT!: I got my device to connect to the pc. I simply went to Settings-->System--->USB to PC and enabled it. Then when I connected my device i had to run some drivers searches through windows and finally it recognized my wing as a winmo 6.1 device.
just loaded Windows 7 on my laptop and went to flash to the latest energy rom. Im not familiar with WMDC but when it goes to flash, it gives me the RGB screen when rebooting my tp2 then my pc reports cannot complete update due to lost connection... wtf... why? win7 not compatible? am I a retard?
Not at all
XITruthiX said:
just loaded Windows 7 on my laptop and went to flash to the latest energy rom. Im not familiar with WMDC but when it goes to flash, it gives me the RGB screen when rebooting my tp2 then my pc reports cannot complete update due to lost connection... wtf... why? win7 not compatible? am I a retard?
Click to expand...
Click to collapse
I have Windows 7 and flash my ROM. It's not a Windows 7 issue more than likely. It sounds like you have not connected with Activesync before you tried to flash your ROM. The reason I say, you haven't established a communication port with your pc and it therefore cannot enter a usb connection in bootloader. I have had this happen when I didn't wait for activesync to sync with my computer. I got an ERROR: screen, so I know what you're talking about.
Just sync your device with Mobile Device Center and as soon as activesync completes, run the ROM install.
Let me know if this doesn't work. We'll proceed from there.
XITruthiX said:
just loaded Windows 7 on my laptop and went to flash to the latest energy rom. Im not familiar with WMDC but when it goes to flash, it gives me the RGB screen when rebooting my tp2 then my pc reports cannot complete update due to lost connection... wtf... why? win7 not compatible? am I a retard?
Click to expand...
Click to collapse
Its compatible but it can be rly retarded if you dont do it like it wants
1st install wmdc and let it connect to you phone
2nd disable usb connections on wmdc
3rd and so forth go onto flash your device
if it still says that then connect to the internent and boot your phone into the tri color screen WHILE still connected to computer and try flashing from there
I have flashed roms and done Task29 several/many times from my W7-32-bit laptop and my W7-64-bit desktop, and both work fine -- no issues. I didn't do any special procedures or settings (none on purpose, anyway)...it just worked.
I know this doesn't solve your problem...but it might help to know that W7 should work.
I guess by now this should be solved. If not, try getting into bootloader mode (turn your phone off, and turn on by holding power+volume up button). Then connect the USB cable and try flashing.
I also use Windows 7 64b, sometimes when flashing roms got the same problem, and had to reset the phone from the color screen using the button. This has never happed after I started using Task29, because I have to get into bootloader mode manually.
Ok... Id like to continue this post for only one reason, I am in fact a retard...
Simply reading the stickys is always crucial in your quest to not appear far more retarded than you actually are. Apparently windows 7 update DOESNT update WMDC to 6.1. I Re-Read the "For Noobs" sticky and realized hm, maybe I should check to update WMDC and WHAM, no problem.
The moral of the story, read the previous posts. Asking questions in text based form on the forum when perfectly good answers already float about right in front of your eyes is just a complete waste of precious bandwidth, so dont do it.
I apologize.
Sometimes I post things and feel like a complete idiot, I actually just had a lot of trouble flashing my tp2 to a cooked rom for the first time, but I've had HTC phones since the wing and still run into problems. This last bout of problems I had was fixed by simply reseting my phone to factory default :O
Hello,hello,
Anyway without going into it too much i have my phone with imcokeman's 2.31 and all ready to go with a new screen. I'm trying to use mtty.exe on windows 7 and with usb turned off on wmdc and i keep getting "usb can not open" error
i tried administrator,xp compatibility,Eugenia project, nothing seems to be working.
If anybody has any idea how to fix this....then that would be coooool. otherwise i think i'm going to have to get a new phone. (htc of course!)
spuzzum said:
Hello,hello,
Anyway without going into it too much i have my phone with imcokeman's 2.31 and all ready to go with a new screen. I'm trying to use mtty.exe on windows 7 and with usb turned off on wmdc and i keep getting "usb can not open" error
i tried administrator,xp compatibility,Eugenia project, nothing seems to be working.
If anybody has any idea how to fix this....then that would be coooool. otherwise i think i'm going to have to get a new phone. (htc of course!)
Click to expand...
Click to collapse
Have you tried Virtual XP? Also, you did put your device in bootloader, right?
Windows 7 32 bit doesn't have that many issues, but 64 bit does... Try to get a machine with XP if at all possible. It will solve a lot (if not all) your issues (current and future )
yeah , i had it in bootloader 2.31, tricolor screen,with custom rom, never had too many problems doing this stuff with xp. I'll see what i can do in the next couple of days after that.....new or used phone. thanks for the reply.
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
buusing said:
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
Click to expand...
Click to collapse
What OS and version are you using for starters (i.e. Windows XP, Vista, 7 etc)
And not last, what ROM do you have? Stock HTC or a cooked one?
buusing said:
I can't use HTC sync between my pc and my legend, i can't transfer any files between them either, the only thing i can do when i connect it to my PC, is to recharge it..
My PC says that it cannot install any drivers, and i have tried to install them manually, but without any luck.
What should i do ?
Click to expand...
Click to collapse
I suddenly had a problem where my Legend would charge over USB but there was no indication on the phone that sync was available.
I tried a bunch of different roms. Even going so far as to revert to a stock ROM.
Nothing worked. I ended up putting it in as a warranty return for repair.
One strange thing was it would still connect in Fastboot and recovery, give that a try. If so, you have the same strange problem I had.
E.E.
I have tried on both win XP and Win 7, i have unrooted my legend to ver. 1.31
eepunk said:
I suddenly had a problem where my Legend would charge over USB but there was no indication on the phone that sync was available.
I tried a bunch of different roms. Even going so far as to revert to a stock ROM.
Nothing worked. I ended up putting it in as a warranty return for repair.
One strange thing was it would still connect in Fastboot and recovery, give that a try. If so, you have the same strange problem I had.
E.E.
Click to expand...
Click to collapse
I think that i may have the same problem as you, though i can charge it through the computer. But i can't access my SD card and i can't use HTC sync
HTC Sync is a dog