I need help .
When i start my 02 atom pure, it opens but it stops on the WINDOWS MOBILE page and it asks me to 'tap the screen to set up your mobile-based device". if i do this it goes to the 'align screen" then i follow the instructions. but it just goes on and on....
I also did the "press camera+reset" wherein it goes to the black with white text asking to choose 1 or 2
If i choose #1: Module rebugging mode. it will say reboot for next usage. then I would reboot. I reboot by doing the soft reset. Then it goes to Windows Mobile - but it would say again Tap the screen to set up your windows mobile-based device.
If i choose # 2 (Jump to DM). it goes to the Windows Mobile page again and asks me to do the.... tap the screen
Other things I did were:
1. I tried reinstalling again the XDA-Atom-Eng (i did this when i first had my 02 phone).
2. I also tried to download the Windows phone 6.5 from http://forum.xda-developers.com/showthread.php?t=629499 I saved it in my storage card. But it seems it didn't apply when i opened my 02.
need HELP terribly. Thanks!
maybe that ROM you have been Install....not for o2 XDA-Atom Pure...that's your problem
Related
Sorry if these questions have been asked before, but i need clear answers please...
1) Will Upgrading my ROM to B&B 4.1 invalidate my warranty?
2) Do i need to USPL my P3300? - it's a HTC branded device (not from other networks)
3) The following instruction were for B&B v.2.0 , will they work for 4.1?
Code:
1. download the file Artemis_USPL.zip
2. unpack into the folder c:\USPL
3. download the file ARTEMIS_Black_Blue_v2.zip
4. unpack into the folder c:\ROM
5. soft reset your phone and have it charged over 50% (I have it fully charged)
6. wait until the system starts on your Artemis
7. turn on flight mode (probably not necessary, but I wanted to minimize any risks)
8. connect your Artemis to PC with a USB cable
9. wait until ActiveSync icon in your tray (lower right corner of your windows desktop) turns from gray to green. If you connect your Artemis for the first time to PC, you do not need to set up synchronization, just click "cancel" on the first screen of "Synchronization Setup Wizard"
10. while ActiveSync icon is green, run c:\USPL\start_uspl.exe
11. a DOS screen will pop up with the text "Initializing: 0.." in the bottom indicating probably seconds from the start (it stopped around 70 in my case after about 1.5 min)
12. DOS screen disappears and PDA Phone ROM update utility pops up
13. at the same time, your Artemis turns blank (orange/green LED turns off as well)
14. tick the check box next to " I understand..." and then click Next
15. tick the check box next to " I completed..." and then click Next
16. a box saying "Verifying information on your PDA..." pops up
17. on the next screen click Update button
18. next screen says "Upgrade to ... image version 9.99" - click Next
19. Next screen says "You are now ready to update..." - click Next, a window with a blue progress bar appears with a text "Updating ROM image..", it quickly runs to 100%
20. next screen says "Congratulations! ..." - click Finish
21. your phone turns on and boots into your old system, however it should be CID unlocked now
22. your Active Sync should reestablish and icon turns green again
23. do not touch anything (phone or USB cable) and run C:\ROM\ROMUpdateUtility.exe (make sure activesync icon is green)
24. PDA Phone ROM Update utility window appears, tick the check box next to " I understand..." and then click Next
25. tick the check box next to " I completed..." and then click Next
26. a box saying "Verifying information on your PDA..." pops up
27. on next screen click Update button (says "Current information...")
28. next screen says "Upgrade to ... image version BnB2.0" - click Next
29. Next screen says "You are now ready to update..." - click Next
30. a window with a blue progress bar appears with a text "Updating ROM image..", your Artemis will have light gray screen with blue progress bar showing the progress of flashing - do not touch anything and wait (it took 2-3 minutes on my 3 years old PC)
31. next screen says "Congratulations! ..." - click Finish
32. your Artemis turns on and starts booting, you can disconnect it from PC now
33. the boot screen remains the same (T-Mobile in my case), so do not panic!! it is normal
34. wait until calibrate the screen appears, calibrate, choose time zone and you are ready to use your new OS
35. let me know if this manual was clear enough, whether it helped you and please suggest potential changes for improvement
4) If i brick my device, will i be able to reflash the original ROM back on to it?
5) If i do upgrade will the GPS work properly? - and how would i get TOMTOM on it?
Sorry if you have seen these questions many times before,
All help will be greatly appreciated, Thanks
1) Yes
2) I don't know... but I think you'll must do it
3) Lastest ROM are easyer... just an setup file whitch to all...(your instructions are OK, i did it with my first Upgrade)
4) Yes, IF YOU HAVE THE ORIGINAL ROM FILE (I did it)..
5) Some ROM can have a problem on GPS device... there a patch... i found it in this forum.. TOMTOM or Ather GPS SoftWare are work properly (tried with TOMTOM 6.0&6.03 / iGo 2006 / MioMAP..)
PS : PDA soft ware are faster on WM6, but i find GPS synchronization is Slower..
thanks for the reply, you helped me out loads.
Hello
PPC: Blue Angel T-Mobile GER
Rom: Xplode Wm6.00.00.WWE
Radio:1.15.00
Protocol: 1337.45
From this rom i want to upgrade to Wm6.1 from Xplode.
My Upgrade steps:
1. Bootloader
2.The ppc shows "Serial"/"Usb" and "v2.05"
2.2 Kill Active sync
3. starting MaUpgradeUt_noID
4.MaUpgradeUt_noID gives no informations about the current Rom /upgrade rom
5.Next
6. Error 150
What i have to do?
Plx help me
Sry for my bad english!
Thx to all
It must be an OS problem
Try using Windows XP rather than using Vista.
I got the same problem with my XDA IIs,
I tried it in Windows XP and successfully Updated to WM 6.1
i have Windows XP no Vista
Give it a try without killing ActiveSync on PC.
1. Put device in bootloader mode
2. Put device in the cradle
3. Start update program (wait till 100% and do not remove device out the cradle)
4. When update has finished, hard reset the device
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
- If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.(“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES)
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
- If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
- Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
5. Your upgraded ROM is now running!
Greets Rossi
Hi, I just bought my first mobile with windows mobile system.
At the moment I see from Device Information:
ROM version: WM6.1de LUC WWE.
Well I would like to try different op systems like WM5 and WM6. But I can't find any tutorials for newbies. Also I live in Estonia and I would like to use as a phone, so what about the unlocking? At the moment it's unlocked, but if i flash it, does this change anything?
no it will still be unlocked if you flash it.
Oh good, then I can flash it, right now I have some old data from the previous user and I have some problems with connecting to the operator.
E: I am trying out tomal versions right now, but is there as simple as the tomal installer with wm5.0?
Welcome to forums
Have a deep read to the Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and enjoy!
Can I turn off the ActiveSync, so it would not be running when I am not connected to the PC?
Also I was looking at the screen and I saw that couple of millimeters from each side there is black line. So is it possible to switch it to "full screen" or is it normal?
Finally I would like to know how to change the start bar's height and other menu sizes?
For activesync:
To get rid of this, do the following: Start Active Sync on your Wizard, then
Select menu -> select configure Server -> Enter just any name for server - select next - select advance - do not change drop down boxes and select next. Then unselect all check boxes - select finish. Then select menu again - select schedule - For both drop down boxes select Manually. Then push OK button. Now ActiveSync will not restart itself.
Try to use search and read a lot, with that most of your questions will be solved.
hi
my name is shekhar
please get me wm 6.5 to my htc diamond
i want to upgrade from wm6.1 to wm 6.5
please
How to Install or Update your Windows Mobile?
Please Follow Below Orders :
Please Follow Below Orders :
1. you need a PC
2-1. If you have Windows XP -> Setup ActiveSync 4.5 from Here
2-2. If you have Windows Vista or 7 -> Setup Windows Mobile Device Center from Here
3.If you use manufactured ROM(Orginal WM6.1 ROM OR Official ROM) -> Install Touch_Diamond_-HardSPL_OILNEX From Here
How To Install HardSPL on Touch Diamond?
-> After Downloading and Extracting this file
you Must connect your Touch Diamond to your PC with its Cable
Let your PC Connect to your PPC with ActiveSync or Windows Mobile Device Center
Find HardSPL Folder and Run ROMUpdateUtility.exe
At Appeared Windows Page By ROMUpdateUtility.exe Accept Check Box and Click Next Button
Warning : Don't Unplug in Touch Diamond's Cable , Diamond's Battery Must be Charged More than 50%
Then you can see this Message on your PC->"verify the information on your PDAphone...Please wait"
After That you can see Setup Page on your PPC with 4 colors and on the White Color Part ,you can see USB (Notice : You can See Setup Page with Holding Sound Decreasing Button and Pressing Restart Button togather and Release Sound Decreasing Button Until Appearing That Screen)
Clicking Update Button And Next Button After That
And in Finally you can See Two Process Bars are Processing in the Same Time One of them on your PC and Another on your PPC and Restart your Device automatically.
I congratulate, your Touch Diamond Has Been Unlocked now you can install any ROMS That you Want
4. Downloading WINDOW MOBILE 6.5 WITH HTC SENSE 2.5 from Here ( you can See its Pic Here)And Extract this file
5. you Have this folder With two Files CustomRUU.exe And a File With NBH suffix , IF this Folder Dosn't have CustomRUU.exe Download it from Here And Put it to this Folder
5. Run CustomRUU.exe -> Keep Clicking Check Box Button and Next Button until Appearing That Message Again : "verify the information on your PDAphone...Please wait"
6. Clicking Update Button And Next Button After That
7. you can see again Two Process Bars are Processing at the Same Time On your PC and PPC
8. After Finishing ->your PPC Restarts Automatically Again And you Have WM6.5+HTC SENSE 2.5 ON YOUR TOUCH DIAMOND
9. Enjoy. (This ROM Has Been Made And Cooked by donsalari So Much Fast and Stable and Also Really Nice)
Hi guyz!
I have heard it said some of the ROM updates cause some technical failure...like GPS failure or G-sensor....
I wanna ask someone, who have tried this ROM if its ok and will not make any defection!
Thanks in advance!
workes great
Hey guys, I found how to upgrade the HP 6945 in a brazilian website and I tried, IT WORKS! I'll explain how to do so now that I can post URLs
First of all, and which is a bit difficult nowadays, you need to use Windows XP, I saw cases that the people have done the upgrade in a virtual machine, but it didn't worked for me.
Let's go to the specifications of your mobile: your Flash Type MUST BE G4 and your BootLoader MUST BE G.39 , if you don't know you can see that in your mobile "Start/System/HP Asset Viewer"
Let's start,
1. Connect your mobile by ActiveSync (you'll need the 4.1 version as your mobile is WM5) using the cradle/dock/usb (was recommended to do a Hard Reset, but it's optional. To do so press On/Off , Send and Cancel Calls buttons, then use the PEN (Stylus) to press the Reset button under the mobile)
ActiveSync 4.1 - http://www.mediafire.com/?blql91lb1cqfq5z
2. Download and extract the file "SPL vG.39.7z" - http://www.mediafire.com/?o243pua8x7c0j0h
3. In the "SPL vG.39" folder, look for a shortcut named as "Command Prompt" and execute it
4. Now write this line in the command:
pdocwrite spl -n0 -b 0x20000 0 0x80000
5. You'll receive in your mobile a message about a dll (itsutils.dll) Press YES.
6. Now you have to put your mobile in BootLoader mode. Press the two buttons next to the directional + On/Off + Reset (using the Pen[Stylus])
7. Now open the ActiveSync and go to "connection configurations". Deselect the box "Allow USB Connections".
8. Download and extract the file "6915_ENG.7z" - http://www.mediafire.com/?kgwl83e22e2oody
9. Open the folder and execute "Sable_RUU.exe"
10. Press Upgrade and WAIT for a message "Update finished!"
11. Go back to ActiveSync (now you should use the 4.5 Version), go to "connection configurations" and select "Allow USB Connections"
12. Enjoy.
Everything is working, and you now have a new Office Package, including OneNote.
Your calls are better, don't freezing. The only problem is that SMS don't do any sounds when it arrives, but it's just the SMS.
The bluetooth you'll need to go to the Settings/Connections for the first time to work, but it's just once.
I have all the downloable content, if the link don't work, email me.
The original Rom of your iPAQ you can be found at HP's website named as GSM Radio Firmware, if you want, but I don't mind you'll need it.
The original website is in Brazilian-Portuguese, I've just translated for you.
http://www.gsmfans.com.br/index.php?topic=202365.0
That's everything. =)