Related
Hello, earlier today i felt the device was very warm, i tried to switch it on but it dint respond, even to a reset. when i plugged it into the wall charger all i get is the right hand LED glowing red.
HELP!!!!!!!!!!! how do i hard reset it or get it to work again!!!!!!
i would call in orange care, but im out of the country and i really need the pda functionality!!!!
Unlucky. The 'red' light on most HTC devices indicates a serious power problem, usually it means that the battery is dead (as opposed to simply having run out of charge) or very close to death. You can probably get it working again with a new battery, if the incident hasn't damaged any other components.
i had this with my JJ after I accidently let the battery run down, I plugged it in and led went red and unit would not power on, left it plugged in started scanning the manual and web about a red led, 30 mins later, JJ just switched on and all fine.
It's worth a go and ive not had problem since
i dont think that was the case...
i have a feeling it might have been a short or something, because the unit was SERIOUSLY hot.....
nothing i did worked....until............
final time before giving up, the light was still red etc.
i figured what the heck, either way its dead and im going to get a replacement.
i then gave it fairly hard thump
the red light disappeared. i thought to myself, oh crap, i've really killed it.
then i reset it............. IT BOOTED UP!!!!!!!!!!!!!!!
and all my info still intact......brilliant.....im still going to try and get a replacement when i get back, but thank goodness.
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
afhstingray said:
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
Click to expand...
Click to collapse
Actually, it's called percussive maintenance, "the fine art of whacking a machine till it works"
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
I would recommend not using the machine too much until you can get a replacement battery if I were you. Lithium batteries will get very very hot (in some cases expand and ignite) if they are dis-charged too far. Most equipment which uses lithium technologies will have a voltage cut-off on the power input. As each cell is a nominal 3.3V-3.6V, this is often at around 3V in order to not discharge the battery too far. I would have hoped that this was a HARDWARE function rather than software. However with what you have described, if the voltage cutout was somehow disabled, then this could explain the problems.
Of the units that I have seen in the past like this, the red LED would describe the battery voltage being too low to safely power the unit (i.e. battery be dead). Generally a couple of minutes charge will bring it up to a safe working value. However, after 30 minutes this certainly should have been enough. On one of my motorola units, the battery has expanded a couple of millimeters as it starts to dissociate. It may be worth you checking to see whether the battery in your universal has distorted in any way.
Hmm the red light comes on mine all the time.
It just means the battery is low and the unit is charging. .
It should turn green when the battery is at or near optimum charge.
no....thats not the red, charging is orangy when i say red i mean PROPER red. battery is not distorted, and to the best of my knowledge the unit had a good charge, im pretty sure it must have been some kind of hardware short, and am going to call orange as soon as im back in the country.
dosent explain though why when i whacked it it started working again. the whack instantly made the light go out :wink:
i did a battery rundown test as soon as i got the unit, and posted the results on the forum, if the cut off was not working, i would have ended up with a red light then.
i dont have the manual with me now, but is there any documentation on the red light?
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
JOEJOETHEJOEY said:
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
Click to expand...
Click to collapse
this is damn scary! Every day more people add on to the "my univ's gone dead after a small drop" community :?
When my univ was brand new, a friend of mine dropped it from a coffee bar table 3 feet high, and i still heave a sigh! Cant believe nothing happened...!
But one thing i guess we all know, its a "drop" away to kiss our device good bye :roll:
hope you get it back up and running m8! look around the forums, there are lots of breakdown-solutions threads...
cheers,
San
nice work afhstingray
do you think it was a baterry problem.
i have often used my battery till tit just ran out, from what i read in the post it seems to be a bad practice. anyway to turn off the phone
i doubt it was a battery problem as i've been using it until now without problems. (i didnt get a replacement as soon as i got back cos im waiting for this unit to get a bit scruffy before i get it replaced)
i had this once on my c500 as well, but taking out the battery for an hour did the trick. so i dont think the problem is related.
i've dropped my universal quite a few times already and im happy to say other than a few annoying dings on the metal plate with the orange logo, its working fine. and 2 of the drops were pretty bad ones too, i thought for sure the screen would die or crack. guess i got lucky and it hit the floor at an angle not too critical
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
ViaraiX said:
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
Click to expand...
Click to collapse
wouldnt it have worked if it was plugged into the AC then?
Well my Exec was dropped onto concrete at the petrol station whilst I was trying to sort out TomTom and fill up my Yamaha R6 bike at the same time :roll:
No problems, just a couple of case marks.
I guess multitasking should be left to the ladies and computers :lol:
steverae said:
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
Click to expand...
Click to collapse
Also explains why Servers are built so solidly.
When you are trying to recover a server at 2am in the morning they need to stand up to all but a sledgehammer :twisted:
Hi all,
I recently bought the TyTN to replace a SE P900 and make the move to WM5. This is a really impressive piece of kit and I am following this forum regularly now to make this device really work for me. I use the phone an awful lot during the day so I tend to charge it whenever possible. Whilst I am sat at my desk rather than doing any actual useful work I tend to leave it plugged into the USB cable to synchronise as well as charge.
On 3 occasions now I have come back from the kitchen or wherever and found the device locked up and VERY hot..... When I pull the USB cable out of the TyTN the device is unusable still and a soft reset is required to get it going again. Plugging the USB cable back in resynchs to the PC and no further problems detected. The temperature then slowly goes down to "normal".
I /think/ that on the 1st occasion this happened, the battery life had gone down from around 70% to 30%............... Although on the more recent occasions, i didn't notice any particular drop in battery level.
Does anyone else have any experiences of this kind?
Cheers
I belive i may have had this problem the other night.
I have a vario2, left it to charge over night. Woke up the next day and it had locked up and the battery had dropped to around 40% charge.
Imp
For curiosity...your Tytn's serial number starts with ?
Bye... :lol:
Mine is HT627....
i had the same problems with my tytn HT628.
it was getting pretty hot when charging and really hot when wlan was turned on at the same time.
My replacement unit is a HT633, and gets a little bit warmer during charging, but not as hot as before.
i noticed that the battery, that came with the new unit was a litlle bit different then the one i had before. there is a metalplate on the bottom of the battery. the old one was completly covered with white plastic. anyone else have this kind of battery?
Ah - now that is interesting...
Mine has a completely white plastic covered battery too. I'm just conducting a test - WLAN on and charging via the USB...
Incidentally, I've set it to stay on when charging, and the screen backlight is on permanently.
I left it like that all night and when i got up - guess what!
Locked up TyTN
Wasn't very warm though... but I don't usually leave the WLAN on overnight. I'll keep testing.
I have a vario 2 and my serial starts HT632, my battery is almost all white.
I have a screen alignment problem and its getting swapped on monday.
Imp
How's it going all?
My phone has slowly been dying on me, and today was the final straw. I shut the phone off last night, and it will not turn back on. I've tried using a house/usb/car charger with no success. Would I be wrong in assuming that it is a faulty battery? Could there be another problem? The furthest screen the phone reached today was the tmobile white load screen, before turning black and shutting off.
If it is the battery, would this be an appropriate replacement?
http://www.amazon.com/gp/product/B0...rd_t=201&pf_rd_p=278363001&pf_rd_i=B000I4WP24
It does sound suspiciously like a dead battery. Try cleaning the contacts on the battery and phone first. If that still doesn't help, and if the phone hasn't been damaged (you didn't share that info), then you may want to get a replacement battery. The one you linked to would work fine.
Another battery option for you.
http://cgi.ebay.com/Cingular-HTC-81...ryZ15034QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
There is no apparent damage that I've seen. I have had a problem with the phone losing service lately, along with a crackling sound during the start of a call.
Before I order this item, are there any retailers that would carry it? I'm leaving for a week and wouldn't have this replacement in time.
Thanks for the replies!
Check your local Cingular stores -- I don't know if the 8125 battery will fit into a Wizard 200 device (e.g. Qtek 9100), but they should be electrically identical.
I just ordered a replacement battery from amazon.com after trying a battery from a friend....and the phone worked.
I tried one last time to get the phone to charge, but to no avail...UNTIL I seen the orange light after wiggling it around for a bit. The phone made it to the loading screen, and then the light, and the power-up disappeared. I've been trying to get the light to come back on, but I can't seem to get that sweet spot.
Does this sound like a problem with the usb port? If so, is there anyway to fix that?
Thanks!
First off the people and this board itself is tops in my book!!
Now before anyone says it yes....... I have searched.
PHONE 1 I was in the middle of a phone call and the phone went just shut off. Plugged it into a charger (factory one), no charge light. left it overnight and yet still nothing. Tried the battery in another phone and it worked, charged and behaved properly.
PHONE 2 phone works fine but the backlight stays off all of the time. Tried the board with a different LCD and the same problem occured. Is there a fix for this cause I cannot find it, or does anyone know where this feature is located on the motherboard.
Any help in these matters would be appreciated.
Thanks in advance
it is time to donate to the XDA-developers!
excuse me?! If you are looking for donations this is not the correct way to request it.
He means donate the parts to XDA developers... aka, sell them out because they are broke...
I'm sure he was just busting you since he probably doesn't know how to fix it.
BerettaFreak said:
He means donate the parts to XDA developers... aka, sell them out because they are broke...
I'm sure he was just busting you since he probably doesn't know how to fix it.
Click to expand...
Click to collapse
thank you for the clearing that up
update: Phone 1
Left it overnight on the charger, about 3 a.m. saw a light on the ceiling (mid sleep turn) got up and looked at the phone and the screen was white. At 8:30 when I awoke, I looked at the phone and the Cingular splash screen was on. Went to turn on my laptop and "poof" it went blank again.
Someone told me to buy a new battery what do you guys think?
Phone 2 still comes on and the screen is still dim. The screen works tried it with a working phone.
I have this one on Craigslist for parts.
Great News
Phone 1: I FIXED IT!!!!
I cleaned the board with alcohol. disconnected the internal battery for a day then reconnected it back to the board and PRESTO CHANGO THE PHONE IS UP AND RUNNING!!!
Phone 2: The screen is still dim so I will be parting it out.
This doesn't look good to me. I had my phone tethered to my laptop while I slept which I do often with no problems. Today I got up and saw the LED was blinking orange and green. I looked and the battery was down to 11% even though the status bar showed the battery as being fully charged.
I popped the battery out and in, tried again, same thing.
When I plug it in the LED stays solid orange for about 5 seconds and then stats blinking.
I tried it on the OEM charger with phone turned both on and off.
It doesn't appear to be charging and the LED's are blinking green, orange.
Does this seem like a bad battery? I live in the US so accessories are hard to get, I don't have a spare battery to test yet.
What do you suggest? I have a new battery coming but it's going to take a while before it shows up.
I had that too for a minute. I suspected a faulty charge / sync cable, swapped it out, and never saw these LEDs again.
Had that too. I'm using a second non OEM Battery, I will try it with the original and give feedback.
I had that with my small charging-cable (non OEM) in my car.
I've tried multiple cables. I'm hoping the battery is the culprit. I have another one on the way but it's literally on a slow-boat from China. If it's not the batter then it's the phone and that's no good. Doesn't charge on, off or in bootloader mode. I've read all the threads and it really could be either. Fingers crossed.
My LED was blinking orange/green too
I was using a non-standard (cheap) battery when this suddenly occurred. Changed to original battery and everything was OK again. Seems like the original batteries are best after all (even if they cost ten times more in my country).
Think that too. My Original Battery works well. The Battery from China is "blinking" sometimes for about 15 minutes.
same or even worst problem
During the first day i buy the phone and charge for 10hour, after that i switch on my phone i was shocked my phone wasn't charge at all but the indicator light show from orange to green.
so i charge my phone for the second time, this time its show 100%. i browse the phone setting and function all that less than 30min and before i sleep it was left 70plus % and after i wake up its left with 20plus % and the timing from i sleep to wake up less than 5hr. my wifi ,gprs bluetooth 3g everything is off except the alarm.
now i charge my phone for the third time after charging for 8hr i switch it on and it did charge but only 20plus % and i continue charge my phone for the forth time. i sucessful switch on the phone and its show 100% but it suddenly turn off, i was shock don't know what went wrong i try switch on the phone and its show the phone is low battary.
so i charge it again and the indicator light turn green less then 1min and my phone becoming weird i can't charge and switch on. once awhile it can be turn on.
so i try charging it again and the phone keep on restart.
i got so fedup as the phone is a brand new set and use it for less then 1 week. i'm going to get it fix tomorrow.
anyone with the same problem or know anything when wrong can help pls.
Hard reset helped me + check if a cable is deep enough in the phone
i try already its still the same. do u have the same problem.
i was charging my phone 2 day ago, and listening to music and downloading a lot of mb from internet with wifi, and i putted it under my pillow
after about 2 or 3 hour i pulled it out and saw the orange and green blinking
my phone was like a fire stone, it had a very bad result, the lcd doesn't had touch sensitive anymore
after 2 hour the sensitivity came back, but the story didn't finish yet.
after that, every time i charge this phone, the lcd sensitivity goes off,and after i cool it down, sensitivity comes back
but now while i'm sending this message, the half of screen doesn't have any touch sense what is your suggestion for me???
I had the same issue with my original battery - turned out that the middle pin in the battery connector had been bent when I swapped batteries - I straightened the pin back to normal position and now it charges fine again.
Jon
i am having this problem too. the led is blinking and the battery is not charging. i am forced to use a cradle to charge it up.
The orange and green blinking on charge happened to me a couple of times. In all instances the phone was too hot due to having it covered or temperature of the room was also too hot. Allowing it to cool made it work again. I haven't suffered from this problem ever since I started keep it well ventilated. Hope this helps.
yup. i google for it. and notice it due to overheat. i tried with air con on. it seem working well.
but for me. i cant feel any overheat (like hot/heat on my device when it start blinking.
hide.
The blinking light is the phone saying its overheating
this happened to me but the worst thing was I could of bought a 1500mAh battery from Hong Kong for something like £5/6 but i decided to buy one from my own country the UK and i read that an extended type was the best so i bought an extended 1350mAh for £7.99 thinking i would have no issues but its with this new battery that it overheats if i am charging via wall or pc and using my phone!
using tbattery it says the battery is only a 1230mAh anyway!!
but with my original battery i can charge and use at the same time so kinda annoyed i thought i was paying more to get better but i guess i live and learn
so now i have ordered an 1600mAh for my phone for £5.99
i should just use it as a backup battery .
p/s : what is the average battery temperature ?
My HTC LEO "HANG" when incomming call???
please help...i have htc hd2 (asia/indonesia)
Why my phone HAMG when i recieve incoming call?
somtimes hang when recieve sms too...
PLEASE...HELP ME...ANYONE....
PLEASE...HELP ME...ANYONE....
PLEASE...HELP ME...ANYONE....
My email : [email protected]
alifasikin said:
please help...i have htc hd2 (asia/indonesia)
Why my phone HAMG when i recieve incoming call?
somtimes hang when recieve sms too...
PLEASE...HELP ME...ANYONE....
PLEASE...HELP ME...ANYONE....
PLEASE...HELP ME...ANYONE....
My email : [email protected]
Click to expand...
Click to collapse
Don't hijack threads!
Start a new one otherwise you won't get any reply for your efforts!
I bought 2 batteries from eBay. The cheap Hong Kong one does this at 60%. The other one was from the UK and claims to be the real thing, and it charges all the way to 100% and has given me no problems (it's the one I've been using for the last 30 days).
Moral of the story: Buy official batteries.
Hi all,
a few days ago I`ve got the same issue. Please don`t laugh, but sollution I`ve found is really funny.
Firstly I was trying to flash different ROMs, Radios with no luck. Trying to clean battery contacts and phone contact pins, especially the middle one, with no luck again.
Then, thinking logically ( ), I`ve found what changes occure to my phone. I didn`t flash a new ROM, didn`t intall any new software and so on before the charging become naughty. The only thing that changed was the temperature around, now here is hot like in hell: about +30C. So I plugged in portable charger and put it with my hd2 into refrigirator (changed it to maximum t to avoid any inconvenience) into low humidity container. In a few hours battery stated was shown as 100%. The next time I was trying to charge it again in the room, but got only blinking led, had to put it back into refrigirator
Seems that battery or phone has a temperature sensor, which stops charging when batt t raises above safe level. I believe sometimes this sensor fails or smth like that and charging can be stopped even when t is not so high..