help needed ppl
this is peculiar,I use m2d in my rom (qvga)with a particular new built when I include the m2d packages,the rom doesn't boot.when I exclude the same it boots up.whats funny when I use any other built with the same packages and same kitchen the rom boots up.
so the question is what can be causing the no booting up the rom with the new built?hope the masters and others will help me out
regards
I have had same problem, solved with bobs help:
bobsbbq said:
Ok since I also use this kitchen I will help out a little. Aside from what you have stated above there are a couple of important things you have to do or the ROM will not boot even the stock ROM.
Make sure you Recmod the NTConfig.dll module in Notification Enhancement EXT package.
Also the ConcurrenceMgr.dll module should be recmodded but leave the ConcurrenceMgr.dll file inside the module. This is done automatically in EVK but not in this one.
Ther is a really easy way to port the new sys with a couple of tools and using the import sys function in the kitchen. This way everything gets put in the right folders and is very easy. I will post about this later today when I have more time.
Click to expand...
Click to collapse
PS: in your last PM you only replied without writing nothing
af974 said:
I have had same problem, solved with bobs help:
PS: in your last PM you only replied without writing nothing
Click to expand...
Click to collapse
thx af
am going try this.hope it works for me.
and I did write something in the pm mate.how can u post a blank msg.i guess somebody deleted the msg before it reached to u.lol.jokes apart,what I wrote was,did u find any thing extra/new in the new manila package.
regards
From what i see the only changes from Original Htc Mega RUU are these:
Code:
aGPS_Confirmation_1_0_19183131_04
Audio_Manager_2_2_20121525_LR0
ConnectionSetup_3_1_19193331_00
DShow_2.0.19143026.00
HTCMessage_1_09_281_2
Java_JblendPackage_5_1_5_1_20090727_5_1
LockstreamDRM_1_2_081216_O9_05
MEGA_ConnectionSetup_QVGA
Messaging_Client_Arcsoft_5_2_2_64
PhoneSetting_1_54_0_0
RunCC_1_1_c_0
STK_Service_4_93_0_2
TaskBarIconMgr_2_12_0_1
VoiceRecorder_1_10_18192131_6
Not so much though.
deepankerjha said:
thx af
am going try this.hope it works for me.
and I did write something in the pm mate.how can u post a blank msg.i guess somebody deleted the msg before it reached to u.lol.jokes apart,what I wrote was,did u find any thing extra/new in the new manila package.
regards
Click to expand...
Click to collapse
af974 said:
I have had same problem, solved with bobs help:
PS: in your last PM you only replied without writing nothing
Click to expand...
Click to collapse
I tried mate,didnt work for me.btw I use evk kitchen
regards
use
use the privious Notification Enhancement EXT package..as if the NE package is not recmoded correctly that will cause it not to boot.. simple enuff..
WOOPTIEWOOUS said:
use the privious Notification Enhancement EXT package..as if the NE package is not recmoded correctly that will cause it not to boot.. simple enuff..
Click to expand...
Click to collapse
thx for ur help wooptie
but its not that simple.had the NE EXTENT pkg has not been recomded properly,the rom will not boot with any built.but the rom boots with same pkg but other built and it won't boot with some other built.thats at is the problem.without m2d pkg all builts r booting up
regards
Since NIKE has not a native 6.5 Kernel , and correct me if im wrong, you need to Recmod all the EXT Mega package i suppose.
When Kaiser doesnt have native kernel i did that way.
deepankerjha said:
thx for ur help wooptie
but its not that simple.had the NE EXTENT pkg has not been recomded properly,the rom will not boot with any built.but the rom boots with same pkg but other built and it won't boot with some other built.thats at is the problem.without m2d pkg all builts r booting up
regards
Click to expand...
Click to collapse
af974 said:
Since NIKE has not a native 6.5 Kernel , and correct me if im wrong, you need to Recmod all the EXT Mega package i suppose.
When Kaiser doesnt have native kernel i did that way.
Click to expand...
Click to collapse
hi af
u r right abt native kernel,but mate y the hell the problem will lie on some builts only.I recmod the ext packages but the problem remains.
I know I am being a pain for u,but will u plz have a look on my build log.i am out of home,if u say yes,will send u tomorrow
regards
sure that i will give a look....upload it .
deepankerjha said:
hi af
u r right abt native kernel,but mate y the hell the problem will lie on some builts only.I recmod the ext packages but the problem remains.
I know I am being a pain for u,but will u plz have a look on my build log.i am out of home,if u say yes,will send u tomorrow
regards
Click to expand...
Click to collapse
af974 said:
sure that i will give a look....upload it .
Click to expand...
Click to collapse
Thx a lot bro.will do it at the earliest
regards
af974 said:
sure that i will give a look....upload it .
Click to expand...
Click to collapse
hi bro
plz have a look at the build log,c if u can get any clue from HERE
regards
Ok i gave a fast look to the Log:
SLOT 0 must be with 0zero modules or less then 181, you need to RecMod,maybe someone can correct me if im wrong.
2nd....you have some duplicate modules and they wont be overwrite from the dll(file), so search for them and chenge them.
If ill find something else ill let you know.
Memory Map...
SLOT 0: 0x02000000 - 0x00740000 (END: 0x00060000, 181 MODULES)
0x02000000 - 0x01fe0000 - ROM 0
0x01fa0000 - 0x01e60000 - ROM 1
SLOT 1: 0x04000000 - 0x02020000 (END: 0x02020000, 204 MODULES)
RAM IMAGE: 0x80000000 - 0x802ac494
RAM: 0x802ad000 - 0x802db000 - Used for kernel modules
0x802db000 - 0x83470000 - 49 MB free
you should try this....
1. recmod ALL modules in your EXT folder
2. recmod these three folder in sys...browsing, browsingcore, and browsingie
i did this for kaiser for a year and roms worked great you dont have to have 0 modules in slot 0 if you dont have a native 6.5 kernel, but you do need to get it down alot lower than what you have now. the important thing is the amount of space the modules take up in your virtual memory.
Awww...sure you already said me that Shane....i didnt remember.
BTW i gues that he already recmoded all EXT modules...so he said.
twopumpchump said:
you should try this....
1. recmod ALL modules in your EXT folder
2. recmod these three folder in sys...browsing, browsingcore, and browsingie
i did this for kaiser for a year and roms worked great you dont have to have 0 modules in slot 0 if you dont have a native 6.5 kernel, but you do need to get it down alot lower than what you have now. the important thing is the amount of space the modules take up in your virtual memory.
Click to expand...
Click to collapse
twopumpchump said:
you should try this....
1. recmod ALL modules in your EXT folder
2. recmod these three folder in sys...browsing, browsingcore, and browsingie
i did this for kaiser for a year and roms worked great you dont have to have 0 modules in slot 0 if you dont have a native 6.5 kernel, but you do need to get it down alot lower than what you have now. the important thing is the amount of space the modules take up in your virtual memory.
Click to expand...
Click to collapse
thx a lot twopumpchump
will give a try to this one also.
regards
af974 said:
Awww...sure you already said me that Shane....i didnt remember.
BTW i gues that he already recmoded all EXT modules...so he said.
Click to expand...
Click to collapse
hey af...btw did u get anything extra from the build log?have never been in a hell like this man
regards
BINGO !!!
twopumpchump said:
you should try this....
1. recmod ALL modules in your EXT folder
2. recmod these three folder in sys...browsing, browsingcore, and browsingie
i did this for kaiser for a year and roms worked great you dont have to have 0 modules in slot 0 if you dont have a native 6.5 kernel, but you do need to get it down alot lower than what you have now. the important thing is the amount of space the modules take up in your virtual memory.
Click to expand...
Click to collapse
hi twopumpchump
guess what??? ur suggestion worked for me.i did recmod- browsing, browsingcore, and browsingie and my rom got the much awaited boot up.
thx a lot man for ur kind help.
regards
af974 said:
Awww...sure you already said me that Shane....i didnt remember.
BTW i gues that he already recmoded all EXT modules...so he said.
Click to expand...
Click to collapse
hi af
the problem is solved by the guidence of Shane...yup my rom got boot up ...so releived i m.thx a lot bro for all ur support and help
regards
I cant see anything else wrong....But...
Be sure to have NTConfig.dll recmoded in Notification enhanchment and just for be sure include Adobeflash in SYS,if i remember right i was having boot issue without it,but im not sure ,was long time agò.
Last one, go to one of my thread and check the Log, i use obly EXT Log but you wrote that with stock Chome you dont have problems....and IMO leave the Widgets cos not many people use them.
HTCUtil from mega has a backlight bug so use the one from your native phone or Opal.
If ill think to something else ill let you know.
Related
I made a very simple porting kitchen, it plugs right into Bepe's extended kitchen. It basically ports new SYS folders and XIP's into Herald/Atlas ROMs. Here.
My question is: Is it worth expanding this to every single device on the forum? It'd be very simple to do...
EDIT: Any porting cooks that wish to fix any mistakes I have made in the porting process, by all means, PM me.
I can help you for Prophet user's and cookers
Anything I can do let me know.
Do it!!! I can help for Prophet (sortof) although I clicked the wrong box
If I may add that will be a good idea count us in
OK, everyone. Just post a ZIP file with the following (and tell me what the phone you have, of course)
From your SYS folder:
the .VM folder
the WinCENLS_WWE folder
From your SYS/Shell folder
shell32.exe folder (it's a module.)
shellres.dll folder (it's a module.)
Poke. I need these files for all devices. So far, I only have the Herald's and the Wizard's.
Here the HTC Prophet files.
All in the files but "WINCE_WWE" folder is here "14335b48-529a-ff26-f903-321295f3874e" but same files in
here : http://forum.xda-developers.com/attachment.php?attachmentid=84960&stc=1&d=1210326576
ivanmmj said:
OK, everyone. Just post a ZIP file with the following (and tell me what the phone you have, of course)
From your SYS folder:
the .VM folder
the WinCENLS_WWE folder
From your SYS/Shell folder
shell32.exe folder (it's a module.)
shellres.dll folder (it's a module.)
Click to expand...
Click to collapse
hi ivanmmj.. great work u ve got going around here brother here are the files u mentioned from elfin sys folder.. hope this helps for u to include elfin too in this tool
ababrekar said:
hi ivanmmj.. great work u ve got going around here brother here are the files u mentioned from elfin sys folder.. hope this helps for u to include elfin too in this tool
Click to expand...
Click to collapse
Are these Elfin only? Or are they Elf compatible as well? (I'm not sure how much is shared between them.)
I also need the .VM folder in the SYS directory. You missed that one.
Here you go. Also sent you a PM with the file on my Mirror site.
Here's the Atom Exec hope it can be added
ivanmmj said:
Are these Elfin only? Or are they Elf compatible as well? (I'm not sure how much is shared between them.)
I also need the .VM folder in the SYS directory. You missed that one.
Click to expand...
Click to collapse
dont know about elf.. never been on that side of cooking.. and here's .vm folder.. missed it out in my sleep
hopefully u can extend the kitchen to xda zinc also ... here r the files u req
Keep up the good work
the files for hermes tytn
ivanmmj said:
http://forum.xda-developers.com/showthread.php?t=387303
Click to expand...
Click to collapse
hi ivanmmj.. you might wanna consider checking that link in your first post.. it points to http://here's a link to the app./
cruzzmz said:
hopefully u can extend the kitchen to xda zinc also ... here r the files u req
Keep up the good work
Click to expand...
Click to collapse
caxio said:
the files for hermes tytn
Click to expand...
Click to collapse
Thank you for your contribution. I have added it to the newest build.
ababrekar said:
hi ivanmmj.. you might wanna consider checking that link in your first post.. it points to http://here's a link to the app./
Click to expand...
Click to collapse
I'm not sure what you're referring to.
ivanmmj said:
Thank you for your contribution. I have added it to the newest build.
Click to expand...
Click to collapse
is elfin added too?
I'm not sure what you're referring to.
Click to expand...
Click to collapse
the link to ur kitchen thread in first post
ababrekar said:
is elfin added too?
the link to ur kitchen thread in first post
Click to expand...
Click to collapse
Yes. And: Oh. lol I see what you mean now. Fixed to the proper post and in the proper format. lol
hi all..
we all have suffered from one common things while making a rom..
after all your hard work and spending so much time and reading on and on for improvements u encounter this
stuck at smart mobility
so i request all people who faced such problems and have solved them,,plz write here about it..
what u have done..??
what is the cause??
this will easier for lots of people to understand why they have non booting rom..
so afterall i got this solution..
1.Make sure the following packages are cooked:
. NetCF or NetCF 3.5
. Dummy FWUPDATE
. Dummy SQM
. WinCENLS_WWE
byDOTCOMPT
2.if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system.
byTWOPUMPCHUMP
3.recmod ALL modules in your EXT folder
recmod these three folder in sys...browsing, browsingcore, and browsingie
BYTWOPUMPCHUMP
4.ALSO SEE THE ATCHED TXT FILES BY KOKOTAS FOR WHICH FILE TO RECMOD ON PAGE 3
This could be caused by many things.
I suggest you check all last changes you did, which packages/edits etc...
Before I edit my kitchen I always make sure I have a backup incase stuff like this happens so I can refert back.
I recommend editing step by step and not edit to many things at once.
Grtz Leo
Totally agree with Laurentius.
Just some points to look:
1.wince.nls
2.XIP
3.boot.rgu
4.UPXed files
Best Regards!
ps:A Hard Reset would be nice after flashing
kokotas said:
Totally agree with Laurentius.
Just some points to look:
1.wince.nls
2.XIP
3.boot.rgu
4.UPXed files
Best Regards!
ps:A Hard Reset would be nice after flashing
Click to expand...
Click to collapse
almost done..
ok i made a rom 23544..works like a charmm..
but i just upgrade new build like 23548,49,52
all have non booting issue..
no changes have been made from 23544 build not even new application added..
but no luckk.
checked wince..found xip is ok..
also done recmod but no luck..
so now???
i tell u what i just change build 23544,,i got bootable rom..then just chang build ..48..49
non bootable rom
Try XIP 23544, SYS 23548,49,52.
Maybe a bad XIP source?!
If you change to a new MS build you only need MSXipkernel plus SYS.
No recmod is needed, I never use recmod.
Try playing with wincenls, move it from SYS to XIP or maybe viceversa.
Laurentius26 said:
If you change to a new MS build you only need MSXipkernel plus SYS.
No recmod is needed, I never use recmod.
Try playing with wincenls, move it from SYS to XIP or maybe viceversa.
Click to expand...
Click to collapse
but without recmod the kitchen even not building a rom
That's weird, the kitchen should run without recmodding modules.
Maybe you have a conflict in your kitchen where a file is overwriting a module?
saurabh88 said:
but without recmod the kitchen even not building a rom
Click to expand...
Click to collapse
so your rom gets stuck at first screen, with radio info ect on bottom of screen? what modules are you recmodding? do you have hidden and system files visable on your pc? what kitchen are you using? there are alot of things that could cause your rom not to boot, the more info you give the easier it is to help
twopumpchump said:
so your rom gets stuck at first screen, with radio info ect on bottom of screen? what modules are you recmodding? do you have hidden and system files visable on your pc? what kitchen are you using? there are alot of things that could cause your rom not to boot, the more info you give the easier it is to help
Click to expand...
Click to collapse
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
saurabh88 said:
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
Click to expand...
Click to collapse
Make sure the following packages are cooked:
. NetCF or NetCF 3.5
. Dummy FWUPDATE
. Dummy SQM
. WinCENLS_WWE
Could you post your Build_log.txt here.
-
saurabh88 said:
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
Click to expand...
Click to collapse
then obviously something different has been done with the newer builds you are trying to use that wasnt done with 23544. did you recmod 23544 the exact same way as you did the newer ones that didnt work? if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system. you can use beyond compare to compare the working build to the non-working one, if there is something different you will be able to tell.
twopumpchump said:
then obviously something different has been done with the newer builds you are trying to use that wasnt done with 23544. did you recmod 23544 the exact same way as you did the newer ones that didnt work? if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system. you can use beyond compare to compare the working build to the non-working one, if there is something different you will be able to tell.
Click to expand...
Click to collapse
yes screen does not dim..
so what is your suggestion??
Then XIP(MSXIPKernel) is probably the cause.
Did you try a different XIP or a combination of XIP(MSXIPKernel) 23544 and SYS 23548 as I told you before?
From where did you get the 23548-49-52 builds?
Maybe you should download them again?
Best Regards!
saurabh88 said:
yes screen does not dim..
so what is your suggestion??
Click to expand...
Click to collapse
thats why i asked if you have hidden and system files showing on your pc...maybe you left some files/dsm/rgu out of msxipkernel.
kokotas said:
Then XIP(MSXIPKernel) is probably the cause.
Did you try a different XIP or a combination of XIP(MSXIPKernel) 23544 and SYS 23548 as I told you before?
From where did you get the 23548-49-52 builds?
Maybe you should download them again?
Best Regards!
Click to expand...
Click to collapse
yes did it but no luck.....
i download them from da_g thread..
if u can plz give me the link of them to dwnld again
twopumpchump said:
thats why i asked if you have hidden and system files showing on your pc...maybe you left some files/dsm/rgu out of msxipkernel.
Click to expand...
Click to collapse
ok i will compare them and see.l
saurabh88 said:
yes did it but no luck.....
i download them from da_g thread..
if u can plz give me the link of them to dwnld again
Click to expand...
Click to collapse
Have you tried the 23554 that I posted (It is in my Rollups folder, link can be found in NRGZ sticky in this forum)
build log of 23554
still stuck at smart mobility,,,here i attached file plz someone look at it and help me...
i have just sorted them through dump sorter..
Saurabh: see also this post by twopumpchump: http://forum.xda-developers.com/showpost.php?p=6032341&postcount=14
does some one know wich packages give threaded mail:-o
i know its 235 serie that have threaded mail
i looked at the explenationthread of sys packages made by da_g
but none off the package have info about threaded mail
Mod edit: Post moved
MOD Edit:"This post has been moved to a new thread"
You can try this
http://forum.xda-developers.com/showthread.php?t=657372
if it works... share with us your experince
You can take a look at this package. I cook for WQVGA using Vistang's Visual Kitchen, so you may need to replace the pngs with those from a COM5 build. (But if you use HTC's email wizard you won't get to see these icons )
The structure of the EXT package may need modification too based on your kitchen.
i cant download the pkg... it hangs loading the link.....
ock said:
You can take a look at this package. I cook for WQVGA using Vistang's Visual Kitchen, so you may need to replace the pngs with those from a COM5 build. (But if you use HTC's email wizard you won't get to see these icons )
The structure of the EXT package may need modification too based on your kitchen.
Click to expand...
Click to collapse
thank you gonna give it a go and see what happens:-o
+ Que PPC said:
i cant download the pkg... it hangs loading the link.....
Click to expand...
Click to collapse
i attach it for you here
edit: hmmm when flashed i get the message 'pkg' isnt a valid ppc application
and then nothing starts:S
i cant even egt the dialer
verry lame:-o
forgot the pics but i think that aint the problem:-o
and i recmodded the dll files and the .exe
i use ervius kitchen and there those are recmodded to so that aint the problem either:-o
edit2: still not managed to get it
i do got manilla starting again
but now tmail isnt a valid ppc application:s
time will get me there
just wish i still had my dualcore to make the roms
edit3: message is gone now my mails or the inbox wont open:s
but im getting close to get it working i think
miniterror said:
edit2: still not managed to get it
i do got manilla starting again
but now tmail isnt a valid ppc application:s
time will get me there
just wish i still had my dualcore to make the roms
edit3: message is gone now my mails or the inbox wont open:s
but im getting close to get it working i think
Click to expand...
Click to collapse
Forgot to mention, it won't work on COM2 builds (if I've not mistaken)
ock said:
Forgot to mention, it won't work on COM2 builds (if I've not mistaken)
Click to expand...
Click to collapse
lol
thats what i am trying to do
get it working on 21901:-o
mikenificent said he has it working in 21901
edit: hmmm think i have to wait till mike wants to tell me how he has done it
replaced all the files you mentioned
tried it as ext at the end, at ext in the beginning, as sys package
and replacing them in sys seperatly and none of the options work for me
edit: gonna give it one more spin as i thought of something wich might fix it
Damn... hope he can shares the info....
+ Que PPC said:
Damn... hope he can shares the info....
Click to expand...
Click to collapse
yep already talked with him as we are the only two dutch blackstone chefs
he will tell me but first he wants bring out his rom with the feature and then he will help me getting it
in the meantime i keep on trying things
the file that whas attached above contained a mui(language file)
why only the language file and not the normall dll that comes with it(flashing now to see if it works)
im keeping track of all the files i am replacing adn if i manage to find out wich files to include i will tell here
but first i have to find it
cool... yeah lets wait for is release he is on his rights to do that
Many apps uses Muis to set some trasnlations another uses the same structure of the dll for dialog boxes... thats why some apps has and some hasnt
+ Que PPC said:
cool... yeah lets wait for is release he is on his rights to do that
Many apps uses Muis to set some trasnlations another uses the same structure of the dll for dialog boxes... thats why some apps has and some hasnt
Click to expand...
Click to collapse
ok i have tried everything i could think off
im gonna quit trying to search the solution
i will just wait for him to tell it
i bet it is something obvious i am missing atm
I found this post while searching for the same thing. I have not tried it yet so I'm not for sure.
nsauceda35 said:
I found this post while searching for the same thing. I have not tried it yet so I'm not for sure.
Click to expand...
Click to collapse
on 21 build it doesnt work yet
im awaiting till mike tells mehow to make it working
^ I say Mike is full it. No offense to him.
vetvito said:
^ I say Mike is full it. No offense to him.
Click to expand...
Click to collapse
i think mike has all the right to wait with telling it
he has found something that should be impossible
he is finalizing his update and for finding out how it works he has the right to show people he found it
besides he isnt obligated to tell how it is done
he could also choose to keep the secret for himself
i have tried it today without succes and i have tried some combos with the files posted on previous page and moving arround register and comparing them
i would also wait with telling till i finished my rom and gave it to the users
still no news ?
PM the OP maybe he already ha sthe solution but dont want to share it
Anything ever come of this? I've been looking for a way to get the threaded email from COM5 on to a COM2 ROM (Specifically TMOUS stock 2.10) since I got my Leo. The Start menu's fine at the bottom with smaller phones, but I much prefer it at the top on the Leo - and I'm greedy enough to want the advantages of COM5 as well. Having come from an i900 Omnia with the latest COM5 builds, I miss threaded email.
Have been hunting high and low for the necessary files for some time, though I assumed simply overwriting tmail.exe & tmailutl.dll wouldn't do the trick - and everything I've read leads me to believe this is unfortunately the case. Surprises me there hasn't been more work done towards getting this functional..
If anyone IS working on this, I'm more than happy to test/help out if need be.
I haven't tried it myself, but I've seen this post:
http://forum.xda-developers.com/showpost.php?p=5607877&postcount=11934
ther-amm said:
Try this one.
Base_DPI_xxx
email_wizard_exchange.png
email_wizard_winlive.png
Base_Lang_xxxx
outres.dll.xxxx.mui
BaseApps
cemapi.dll
tmail.exe
f50e9a40-aed9-497a-bdea-84451210e960.rgu (Add the following entries to this file.)
Redist
tmailutl.dll
Code:
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Exchange]
"Rank"=dword:4000
"Name"="Microsoft Exchange"
"Exchange"=dword:1
"Icon"="\\Windows\\email_wizard_exchange.png"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\WindowsLive]
"Rank"=dword:3000
"Name"="Windows Live Mail"
"Icon"="\\Windows\\email_wizard_winlive.png"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Gmail]
"Rank"=dword:2000
"Name"="Gmail"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Yahoo]
"Rank"=dword:1000
"Name"="Yahoo!"
that's works for me with 28223 and 23102. Let me know if that's works for you too.
Below are links to 23102 emulator image for QVGA and WQVGA with threaded mail and Office Mobile 2010 14.0.23529
http://rapidshare.com/files/349684012/23102_PPC_USA_GSM_QVGA_VR.7z
http://rapidshare.com/files/349715469/23102_PPC_USA_GSM_WQVGA_VR.7z
Good luck.
Click to expand...
Click to collapse
Cheers for the reply - saw that thread, but it was for builds 28xxx & 23xxx - I'm looking to get it working on 21xxx builds.
plz anyone have it??
i need them..
or specifically i want ext packages from chefs who have made successful mrga manilla rom..
plz
saurabh88 said:
plz anyone have it??
i need them..
or specifically i want ext packages from chefs who have made successful mrga manilla rom..
plz
Click to expand...
Click to collapse
why not dump the rom:-o
think its afster then waiting for some oen to uplaod the ext packages
miniterror said:
why not dump the rom:-o
think its afster then waiting for some oen to uplaod the ext packages
Click to expand...
Click to collapse
mate i have elfin not mega
how can i dump rom???
saurabh88 said:
mate i have elfin not mega
how can i dump rom???
Click to expand...
Click to collapse
go to the mega part of the forum and downlaod the original rom there from wiki
and then dump it with the kitchen u use(i know i can do that with ervius kitchen)
miniterror said:
go to the mega part of the forum and downlaod the original rom there from wiki
and then dump it with the kitchen u use(i know i can do that with ervius kitchen)
Click to expand...
Click to collapse
ahhhhhhhhhhh
thats a charm..thanx buddy..
saurabh88 said:
ahhhhhhhhhhh
thats a charm..thanx buddy..
Click to expand...
Click to collapse
youre welcome
dont forget it has to be a official rom or a unprotected one from a chef
here is a link to a post from da_g
http://rapidshare.com/files/260899819/HTC-Mega-96-dpi-320-240-7-7-2009.rar
and here is the thread " http://forum.xda-developers.com/showthread.php?t=541625 "
saurabh88 said:
plz anyone have it??
i need them..
or specifically i want ext packages from chefs who have made successful mrga manilla rom..
plz
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=642817
Remember most of them has been updated and patched to work in other devices... check the whitealien thread just use the search tehre are many oem ext and cab threads.
thanx all of you..
sorry to say that i have already that ext packages from the first day..
but when i start cooking with them my evk stuck on album ext saying found duplicate file on mudule then same things on and on and on..
and never build a rom..
and without that packages i can easily build rom..
second thing when i use whitlein packages to cook,it succedd but not launching manilla...
Hi
My ROM has some tweaks and extras that needs a soft reset after initialization wth 1st boot. How can I make a automatic reboot just the 1st time the phone boots up?
If you're using RunCC, edit your *.rgu/app.reg accordingly:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\RunCC]
"ResetDevice"=dword:00000001
How can I know if I use runCC?
You don't know which packages you're using for your ROM? Funny thing!
animelover said:
You don't know which packages you're using for your ROM? Funny thing!
Click to expand...
Click to collapse
hehe... just using a dump of official rhodium S2, and spiced it up a bit, and deleted things I don't need
Take a look into EXT -> Rhodium -> Your Build -> Rhodium_External_Packages and search for "RunCC"!
animelover said:
Take a look into EXT -> Rhodium -> Your Build -> Rhodium_External_Packages and search for "RunCC"!
Click to expand...
Click to collapse
yeye... there it is Thanks
animelover said:
You don't know which packages you're using for your ROM? Funny thing!
Click to expand...
Click to collapse
Funny indeed. These are the junior cooks we get these days...
No offense here but ...
I think all of great cooks started as "junior"
Even the big NRGZ28
best regards
fwt
hey hey... fair play ppl... glad to have new chefs CC is for that... new chefs and experienced chefs
fwt said:
No offense here but ...
I think all of great cooks started as "junior"
Even the big NRGZ28
best regards
fwt
Click to expand...
Click to collapse
Very true..
Anyways, I love your sig And it's quite funny how true it is!
if i might stick with the topic
2 - xda_uc also offers a reboot after customization - you could add this to your ext
3 - old method: autorun + checkautorun pkg also reboots your rom (dump blackstone or kovsky)
Problem With add2config Packages?
Hey, I had this problem before where all my packages that I cook in with the add2config method (so they can be removed by the user) aren't installing / aren't being set as default...
These are the following packages that I have the problem with:
BG4All Tabs (add2config) - Doesn't appear in the rom at all
A 6.5.5 Theme (add2config) - Isn't default but is in the list of themes
A 6.5.5 Taskbar (add2config) - Doesn't appear in the rom at all
All this was solved when I changed the runcc rgu file: e110406e-9af4-4cdc-932d-255ac9636f4d like everyone says to "ResetDevice"=dword:00000001
But since rebuilding my kitchen im having the same problem, Ive changed the reset device to 00000001 but still none of the add2config packages are working has anyone got any solutions?
Thanks
[★] said:
Hey, I had this problem before where all my packages that I cook in with the add2config method (so they can be removed by the user) aren't installing / aren't being set as default...
These are the following packages that I have the problem with:
BG4All Tabs (add2config) - Doesn't appear in the rom at all
A 6.5.5 Theme (add2config) - Isn't default but is in the list of themes
A 6.5.5 Taskbar (add2config) - Doesn't appear in the rom at all
All this was solved when I changed the runcc rgu file: e110406e-9af4-4cdc-932d-255ac9636f4d like everyone says to "ResetDevice"=dword:00000001
But since rebuilding my kitchen im having the same problem, Ive changed the reset device to 00000001 but still none of the add2config packages are working has anyone got any solutions?
Thanks
Click to expand...
Click to collapse
I'm not sure anyone will be able to answer that without being totally lucky if you don't post your packages or build-log or at least the add2config text files. Anway, maybe you already do this, but if you don't, then start doing this: after cooking, look in the dump and make sure everything is there. Also, look at config.txt to make sure all the add2config's were compiled properly. This will save you the flash-disappointment.
Ok theres my buildlog, my run cc rgu file and one of my add2config files Thanks.
fwt said:
No offense here but ...
I think all of great cooks started as "junior"
Even the big NRGZ28
best regards
fwt
Click to expand...
Click to collapse
Yeah, but I wasn't cooking ROMs for the public until I knew what the hell I was doing... lol
NRGZ28 said:
Yeah, but I wasn't cooking ROMs for the public until I knew what the hell I was doing... lol
Click to expand...
Click to collapse
lol, also I did this way...
Can't remember where I read something like "PPL: Could you make it in this language?" - " "COOK": I don't know how to!"
LOL
[★] said:
Hey, I had this problem before where all my packages that I cook in with the add2config method (so they can be removed by the user) aren't installing / aren't being set as default...
These are the following packages that I have the problem with:
BG4All Tabs (add2config) - Doesn't appear in the rom at all
A 6.5.5 Theme (add2config) - Isn't default but is in the list of themes
A 6.5.5 Taskbar (add2config) - Doesn't appear in the rom at all
All this was solved when I changed the runcc rgu file: e110406e-9af4-4cdc-932d-255ac9636f4d like everyone says to "ResetDevice"=dword:00000001
But since rebuilding my kitchen im having the same problem, Ive changed the reset device to 00000001 but still none of the add2config packages are working has anyone got any solutions?
Thanks
Click to expand...
Click to collapse
[★] said:
Ok theres my buildlog, my run cc rgu file and one of my add2config files Thanks.
Click to expand...
Click to collapse
Bumping my own question
[★] said:
Ok theres my buildlog, my run cc rgu file and one of my add2config files Thanks.
Click to expand...
Click to collapse
The add2config.txt file is in the wrong folder; it needs to go in the \files sub-folder of the EXT. Put it in there, and you're problems should go away.
Edit: although, I'm seeing this in the build-log:
Found: 1 Extra Info on a Package... Populating config.txt with: CAB: \Windows\B4ALL.cab
Click to expand...
Click to collapse
and this:
Processing "B4ALL.cab" as file
Click to expand...
Click to collapse
So, I guess I don't really understand why the .cab isn't installing. I've never used runcc before, so I can't help you on what may be going on with it. I guess it's ok to put the add2config in the main folder, since it looks like it's compiling correctly.
2nd Edit: all the cab is doing is adding a couple of manila files; you should just dump the two files and put them in an EXT and have them over-write the stock manila files. You don't need to run this as a cab, as far as I can tell.
You need to fix this (minor, but might as well do it):
Failed to parse value name HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\start\Tools\Format SD Card.lnk!!!
Click to expand...
Click to collapse
Farmer Ted said:
The add2config.txt file is in the wrong folder; it needs to go in the \files sub-folder of the EXT. Put it in there, and you're problems should go away.
Edit: although, I'm seeing this in the build-log:
and this:
So, I guess I don't really understand why the .cab isn't installing. I've never used runcc before, so I can't help you on what may be going on with it. I guess it's ok to put the add2config in the main folder, since it looks like it's compiling correctly.
2nd Edit: all the cab is doing is adding a couple of manila files; you should just dump the two files and put them in an EXT and have them over-write the stock manila files. You don't need to run this as a cab, as far as I can tell.
You need to fix this (minor, but might as well do it):
Click to expand...
Click to collapse
(disregard my last post on the other thread, I didnt realise you had replied )
Thanks for the response, yeah the add2config file has worked before in the root of the packages, seems something else it buggy :/
Yeah that cab may be so, but that was an old one just as an example, I really need to get it working for this mortscript thing we discussed on the other thread..
Maybe we could discuss more tomorrow ? Perhaps you could have a nosey in my kitchen or something, I know I should work this stuff out myself, but as a chef still in training, its quite difficult to know what to look for, and help from peopel like you is priceless
Thanks