Hello All,
Just wondering if you can help, I have tried to upgrade my HTC HD2. I installed HSPL on the phone, the phone was hacked fine, all went well. I downloaded the Energy Rom, all started to install fine, then it started to load it up for the first time, and then restarted. Now the HD2 won't connect to Active Sync and is just on the O2 Welcome screen and doesn't go any further, any ideas of how I can sort this out please?
Thanks a lot,
Gavin.
flash a compatible radio. check in the first post of your roms thread, the chef will probably recomend one.
power off, hold vol down, tap power keeping vol down, this boots you to bootloader.
when the word 'serial' turns to 'usb' flash the radio.
restart the phone.
Cheers for that managed to sort it.
Related
NOW ITS FIXED. THANKS
Dear all,
after experimenting quite a few cooked rom, my hd2 stoped working all on a sudden. When i tried to switch it on it came only the white screen with green htc written on it. And it (white screen) stucked and used to stay on. I took the battery off and switched on again it remained same. Just before a while i tried again, now the white screen coming for a second and no more pulse. Please advice me.
Thanks in advance.
Zaman
connect your phone to your PC via ActiveSync/WMDC and run your stock ROM and see if that helps...even with no ROM on the phone Windows should still show connected
http://forum.xda-developers.com/showthread.php?t=609477
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*
Click to expand...
Click to collapse
If you get tri-colored screen you can flash any ROM that you want without ActiveSync ... one of the advantages of HSPL if you have one installed.
Thanks again,
its not the tricolour screen.
It doesn't connect with the pc through active sync. As i tried to go for another rom after it got stuck.
Really worried a bit.
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Which ROM/radio are you using? If you've got HSPL installed it shouldn't be difficult to get it working again, you should just need to flash to a compatible ROM and radio.
[email protected] said:
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Click to expand...
Click to collapse
If you have HSPL and can see tri-color screen on display ... just plug in usb cable (that is connected to PC) in HD2 and start flashing process again the same way that you did before. I suggest you flash some of the official ROMs.
Thanks _x_
after having seen tricoloured screen i connected it with usb cable and flashed as normal. It did work for. And the phone is alive again.
Thanks to all of you for your attention and helps.
Cheers.
Glad I could help but it is "bepe" that you should thank to for HSPL
http://forum.xda-developers.com/showthread.php?t=611433
can you also change the thread title.. Add "Fixed"
Hi everyone in a panic but am trying to stay calm lol...
So i think i have over tinkered and broken my phone....
I am able to get to the boot loader by powering on and holding down the volume button and it will allow me to flash radio and rom to it but it never boots after just hangs and says loading please wait..
I have tried roms
chuckyrom 23148 tabtasitc
OzDroid 2.00
and radio's
2-11-50-26
2-11-50-26
and the same thing with these in any combo
I have ran task 29.. and have to admit i am left a bit worried now... any advice would be great i am going to read the rom section and try and get a new rom and radio combo...
Any Ideas ...
Okay phone seems to be flashing... but task 29 is not seeming to wipe my phone correctly it is still left with the chucky room splash screen after a task 29 i thought this should go white
First thing, your phone is fine - since you can get into bootloader mode.
What version of the HD2 do you have - is it the T-Mobile USA version?
Have you installed HSPL on your phone?
Go to the HTC website for your location and download the ROM for your phone (if your phone is unbranded then download the HTC ROM or if it is branded then download the mobile operator's branded version of the ROM). NOTE: If you are using a TMOUS phone, then double make sure that you are downloading the USA version of the T-Mobile ROM.
Bootup your phone into Bootloader Mode, then connect to your computer via the USB cable. Run the downloaded ROM. Ignore the connected via activesync in the warnings.
Hi i have a O2 uk hd 2 i thought the phone was okay as the laod was coming up and it seems to be writing to it... hm strange it just says loading but the red writing does not appear on the bottom left to say rom and radio version...
Hi have downloaded and flashed the o2 rom from the HTC website it seems to have gone okay BUT now when it boots it is just stuck on the O2 splash screen and goes no further..
I have now removed this from usb and re inserted the sim card and am getting this at the bottom
R 2.07.51.22...2 (Is this the radio?? or the Rom)
g15.32.50.07u
d 1.72.82124
and it has come up slowly and seemed to be loading windows mobile.. and then crashes and starts all over again...
Okay so I have now got a stock o2 rom from htc on my phone. and it is working.
Thank you Fred_up for the advice... should i now be able to start again trying to load a custom rom back on to the device to enable me to use android again?
Try doing a hard reset. While phone is Off, hold Volume up & Volume down buttons, then tap the Power button.
In Bootloader Mode, what does it say?
pull off battery and wait 5 minutes. let the phone cool and the insert back the battery.
it should be alright. however everytime your phone overheating its freeze again..
any solution to that let me know.
cool off your phone. take out the baterry and then once the phone is cool insert the battery and it will boot again.
now hd2 have this problem. overheating. the phone will freeze. hd2 now need freezer to make it not freeze.
hi there, im new here and ive been searching on the forum for a long time, but i didnt see any solution for my problem... (or maybe i was blind) so when i was trying to flash back original ROM from bootloader screen through USB, it didnt show my current image version info on the screen, but it did show the image version that im going to upgrade... however, i still let it updated and it said its succeed. but when my phone going to reboot, it stuck on the "stick together" screen... btw, my phone is PB81120 SS-B3 SPL-2.08. HSPL 8G XE. hope someone can help me solve my problem... thanks first :]
Go into bootloader again and connect the device to your PC via usb (should show USB at the the bottom in bootloader) and run the Rom Update Utility again. But first make sure the ROM is compatible with TmoUS Hd2.
I would recommend flashing stock from the bootloader just to be safe.
but i was trying to install T-Mobile_HD2_MR_Software_2.13.531.1 under bootloader, and it still the same... :[
Was that what you origonally tried updating to? Or was it a custom rom you had tried?
Sent from my HTC HD2 using XDA App
that was the latest i tried to updating to, or any different kinds of version of original ROMs... before, i tried to update a custom ROM on it first, but it failed :[ actually, when i first got my phone it was unlocked, so while i was waiting to get the unlock code for it, i decided to install android on it... later on i had successfuly putting android on it, and by that time i got my unlock code too. then i typed it in and my phone just reboot and stuck on the "stick together" screen till now... so i started to look through the forum and found out that most ppl said is to reflash the ROM back to the original one first, and then everything would be alright... but i guess it didnt work on my phone D:
Have you tried a hard reset? (Hold both volume buttons while booting)
Sent from my HTC HD2 using XDA App
yeah... i tried everything :[
hi,
don't worry, your problem is resolvable. (as long as you see something on screen, you are lucky.)
1) When the stick together screen comes, do you see any numbers on left bottom after waiting for some time say 1 min.
if yes, then your problem is missing OS image only.
in this case, take out the battery. after that, keep volume down pressed all the time and insert battery again. press power button, if mobile does not start immediately. please keep volume down button pressed till the time tricolor screen does not come on. after that connect cable to computer and update normally.
2) If you don't see any number, it may mean multiple things, which all are resolvable. (most likely bootloader stuck in another mode.)
in any case, try steps in given in 1 and report back. before reporting back please install mtty on your computer as it is needed to send commands to mobile to get out of this mode.
Try this: http://forum.xda-developers.com/showthread.php?t=668347
before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
UPDATE: ok ive managed to flash a stock rom onto the hd2 and got it working again. ive upgraded to the latest o2 uk rom. but id stil like android on the device. Does anyone know why magldr might have crashed the phone? the phone is locked to o2 so is that a problem?
nextman6515 said:
before i begin - im a complete newb at this stuff so please bare with me as im very confused. i was following this tutorial http://forum.xda-developers.com/showthread.php?t=893948 and i got to the pont where i had flashed magldr onto my hd2. but instead of booting up after it was done - it got stuck on the o2 splash screen. Only bought the phone yesterday so im a little anxious. ive tried resetting settings by holding the 2 volume buttons down while i press the power button but that didnt do anything. any help appreciated.
Click to expand...
Click to collapse
What are the steps have you done? Basically flash HSPL to root your phone. Then flash MAGLDR. After these two you can start going to build to pick the ROM to flash.
i went back to the beginning and did everything again - i hadnt updated my radio version, which is why it was getting stuck. but the second time round everything seems to have worked fine - i now have boyppcs gingerbread rom installed. my advice to others - always READ THE INSTRUCTIONS CAREFULLY. now if only i could work out how to get that cool 3d effect on the homescreen
dont have a clue how to use magldr
How do you work it?
iiadore said:
How do you work it?
Click to expand...
Click to collapse
Again as I said in reply to your post asking what CWM is click on my guide I have linked in my sig and it will tell youi what MAGLDR iswhat each option is and what it does. I give a run down on HSPL, MAGLDR, cLK, CWM, and radio information. Plus I give detailed instructions on how to install them, plus links to where you can download them.
Help - frozen HD2
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks
r18ball said:
Hi
as per nextman6515, my HD2 is stuck on the o2 screen and despite numerous hard resets, it will not go beyond the 02 screen, I cannot get to the multi-colour screen anymore (volume up and power), I cannot get the phone recognised on usb or windows activesync, does anyone have any advice on getting my phone to work again, all advice will be gratefully received.
thanks
Click to expand...
Click to collapse
into bootloader
connect usb lead
ignore the red bit about activesync, so long as it says usb at the bottom of the screen in bootloader, it is fine.
flash a magldr compatible radio (look it up!)
Once magldr is working, you will need to go into activesync and untick 'allow usb connections' ((or maybe thats only for windows mobile device center, , anyone?)) before you can then start using usb for android based flashing.
done.
I have an HTC Surround that I cant get to boot past htc logo and if i try to hard rest it goes to spl screen. Where can i get the software to reflash it. I also have another microsd that i can change out if that is bad
still working on
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
My surround did the same thing recently. It's a problem surrounds have. Unfortunately you have tried the 3 most common solutions.
1: reflash with stock rom
2: Change out sd card
3: hard reset
The only way I know of to get a working one after you have tried those 3 things is hope it's under warranty. :-/
jackkaiserwork said:
So I replaced the mirco sd and tried to do the restore using the power and volume buttons and still would not get it to try and boot more then a few secs and stop at the htc screen. I also flashed the stock att rom that I got off xda but still no luck. My last chance is trying a new battery today are there any more suggestions
Click to expand...
Click to collapse
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
AT&T Surround ROMS
v1nsai said:
Where did you get that stock at&t rom? I've been all through the developer section and all I see are telus and cingular roms. I've got a phone from the shop that's stuck on the htc logo and replacing the sd card hasn't fixed it. I tried to flash a telus rom because hey what the hell do I have to lose but RUU wasn't able to establish an ActiveSync connection on the htc logo screen looping repeatedly. Is there a way to force it into a sort of download mode from the htc logo to do the flashing from?
Click to expand...
Click to collapse
Cingular is AT&T. I have flashed both of these ROMS to my AT&T Surround. Both work perfectly.
Pre nodo : http://forum.xda-developers.com/showthread.php?t=860842
Nodo : http://forum.xda-developers.com/showthread.php?t=1051579
Is there one for mango?
thanks
Thank you very much
bmamo said:
Is there one for mango?
thanks
Click to expand...
Click to collapse
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
rob243 said:
depending on the spl version of your phone you can flash the cotulla rspl/hspl then flash the DFT rom, you will get mango full unlocked
Click to expand...
Click to collapse
full unlocked as in developer or simlock unlocked?
thanks
Bernard
developer unlock sorry you will be able to sideload to your hearts content even install .xap directly from the browser on the device.
great, thanks!
I'm a bit new to windows phone but I learn quickly usually. could you help me a little bit more by telling me what exactly cotulla rspl/hspl, and DFT rom are? Is there a guide anywhere i could follow?
thanks again
---------- Post added at 02:33 AM ---------- Previous post was at 02:22 AM ----------
i'm guessing this should work:
C. Windows Phone 7 ROM Flashing Instructions
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Do You still need help about this?
Basically you need to download DFT_RSPL_WP7FG2_LAUNCH from this forum, this will allow you to flash a custom rom. The ROM installed at the phone must be a NODO one because mango roms updates the loader and are not compatible.
For apply it you must put the phone on loader. Connect the phone to the usb, turn it off, turn it on but holding volume down key.
Once there you will see the 3 color screen and will say USB run the DFT_RSPL_WP7FG2_LAUNCH and follow the steps.
The phone will restart and showing again the 3 color screen but with HSPL now you can install DFT ROM. DFT ROM is basically a custom Windows Phone with the option to sideload apps you just run ROMUpdateUtility.exe from the DFT ROM downloaded and it will upgrade your OS to DFT Version.
Now what? SPL too high!
My brothers HTC surround has crashed, and fails to load the OS. i can get to the bootloader, but it's
spl-4.2.2250.1 (129185) MNG
i've got HSPL and RSPL, but they say DON'T TRY IF NOT 1.X SPL OR IF IT SAYS MNG. his says both. he was running mango, and i'm just trying to reinstall a stock rom. I'm wondering what advice any of you might have. I've reinstalled roms on Samsung devices, but not on an HTC, so i'm not sure what all this is about, or what the consequences are of proceeding. any help would be great.
Thanks dudes.
bump?
please?
Is it 1/2 bricked?
If you connect the device to a PC does it go to USB mode? At teh red blue green screen does it say USB at the bottom?
USB
It does display USB. If i leave it on for like an hour, eventually, i just discovered, windows DOES load, and it says "your memory is corrupt" it does connect to the computer, and it is detected by my pc, and it does display USB. I'm going to try to put in a new SD card, but i'm wondering once i do that, will i be able to flash the retail rom to it, with that spl.
thanks!
Check this thread http://forum.xda-developers.com/showthread.php?t=1597837.I believe you will have to downgrade your bootloader. I haven't tried this yet myself, I hope it helps you out.
need custom unlocked rom for my htc surround at&t
Hi.. Plz help I have HTC surround at&t unlocked device and I need to fully unlock
It so dat I can install apps from web without going to wp7 market.
And I want to flash it with custom rom..