just installed a flash rom on my hd2, it started loading up properly and then resetted itself. now all thats being displayed is the green htc writing and the blank white background. hard reset doesnt work. it just stays on that blank screen. cant connect to computer. in a spot of bother. please please help.
thanks
turn off the phone, power on whilst holding volume down pressed, keep holding vol down until it boots to bootloader (three stripes) connect to usb cable, when white area says usb flash your rom again, or another rom.
Related
Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
i installed the Ezinput from http://forum.xda-developers.com/showthread.php?t=536215 for wvga... i installed it, then it said a reset is required to finish intallation. after the reset, it went to the touch diamond 2 boot up screen, after that was over, then screen displayed nothing. its black, and usb does not respond when i connect it to the computer. any ideas? i already tried the reset using teh red button. took out the memory card, where i install the .cab, still doesnt work. any help would be greatly appreciated.
If it's totally unresponsive from boot, hard reset it. Hold Volume Down and press the "red button" to reset it. It'll go back to factory settings.
same problem here, help needed!!
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see a message on the screen.
alwaysrun said:
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
Click to expand...
Click to collapse
What you did is boot in "bootloader mode"; in that mode you can try to flash again the original ROM.
thanks
thanks a lot guys, your help is well appreciated, i finally managed to flash the phone bios and now trying to install the original rom, thank you again
I was about to flash a new ROM to my T-Mobile HD2 and decided to install and run Task 29. After doing that my phone stays on the White screen with the pink square that says stick together. I can not get it to get to the bootloader screen and my computer does not recognize that it is linked by USB anymore. I have reset it several times. Any ideas?
yeah this is simple
pull the battery
remove the usb
put battery back on
turn phone on immediatly hold vol down + power(end key)
wait for bootlader screen
insert usb
flash
I tried the above several times and it just does the hard reset and then goes to the stick together screen and doesnt move.
vol up and vol down is hardreset
vol down and end key is bootloader
That fixed it......thanks!
Question answered Thread closed
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
did you do backup?
please i need an English rom to install in my s200 neo touch acer. my acer s200 is stuck in clean boot, i was able to get to bootloader and my acer usb port was installed on my pc, now i need to flash and installed a new rom but i dont have a rom and dont know how to installed it. please helpppppppppppppp. my acer rom is s200_2.003.00_IT but i want an english rom as this one is in italy. Thanks
owltop420 said:
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
Click to expand...
Click to collapse
You Done Good Thing for Correct Bootloader Mode Instruction. . .
Thanks For Share Buddy!
Now You Can Search in google this >>> OS_ACER_2.003.00.EN_WM65_neoTouch
and Install ENGLISH ROM!
Good Luck!
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
same issue
Paalagan said:
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
Click to expand...
Click to collapse
I am facing the same issue...today i flashed "ClockWorkMod_Recovery_V6_-_Karbonn_A15.zip" . It was flashed successfully. But after that whenever I try to enter recovery mode using Power+ Volume up keys, it shows red screen... thats it....i do not see typical recovery screen menu. However the screen turns full white. Only option is to take out the battery and restart the phone.
PLEASE PLEASE PLEASE HELP