Database Users

Standby problem

Hi All,
My O2 mini got problem with standby mode If i don't press power button to switch to standby mode is OK but when I press power button then screen will be turned off, later on I can't turn it on by press power button again. I tried to call my number the phone is ringing and signal light is blinking but the MOST important that I can't answer the call or turn my O2 mini back to normal mode to play. The only way is soft reset and use it without switching to standby mode.
One more thing If i turn it off for 03s only then I can turn on but more than 03s I can't
Anybody know what happened to my phone ? Your help is highly appreciated.
Best REgards,
vatana.

are you sure the backlight is not down? make sure the backlight is up enough when running on battery and on power.
settings > power

I have been, I'm sure the battery is full. I try up any ROM(1.03,1.05,1.11....) but It still not OK !!!
Somebody help me !!!!!!

Thanks Vini.
Backlight is OK not down.
Anybody has experience on it ?
Thanks to All

Pls help me to fix it.
Thanks !

Anybody help us !!!!!!!

Tinh hinh nay thi chi co nuoc anh em minh tu sua thoi anh oi !

Up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11111 Help !!!!!!!!!!!!!!!!!!!!

i also have the same problem before. Last time I think it was viruses and I try to hard reset my Imate Jam, after that until now is already ok.

I suggest you follow the hard-reset advice. If that doesn't solve your probs. see if you can trade it in.
Bypass with a today plugin, like dktoday (easy switch to standby, BT on/off, displays current act. network...)
Success, M

Thax ! But not sussecful ! I try it many times !!!

stand by problem
hi even i am having the same problem no solutions as such
i think the LCD display is gone or else loosing sufficiant power supply
now i am using NOKIA for time being
help us please

You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.

You may call PPCTECHS
Hi,
I had a serious screen problem in the past: My 15 LBs bowling ball droped over my JAM and crashed the screen while blending the case!!
I sent my device to www.ppctechs.com for repairing and now its OK.
They have 2 types of service: partial and full system repair.

Help! Wizard keyboard and buttons locked after every poweron

Hi,
Have next problems. After every power-on:
1. opens outlook mail;
2. have keyboard and main buttons locked. Stilus-screen is OK.
after pressing e (internet explorer)button or comm.manager buttons everything is OK;
3. pressing center button in d-pad opens ScreenAlign (as after hardreset), and after completing this continues normally as expexted;
4. cann't hard reset, because Send button don't operates as p.2 above.
It is Qtek 9100 orign.
Have flashed Qtec, T-mobile and Jam latest roms, exact same behavior
Can anybody help?
And sorry my poor english language.
Tiit

Damn...
My wizard acts exactly the same..... I've spent couple of hours to see if there is any solution of this problem on the forum... Well, there isn't.....:/ NOONE wrote a single word.... Even something like "there is no way to fix it, flush your wizard in the toilet"... Experts...

I'm sorry for being so annoyed, anyway i still request for help and I would be grateful if someone could give a tip

try to flash one of the 6 or 6.1 ROMS perhaps? If that doesnt fix it, then I dont know what to tell you!

I have this issue too. The only thing that works is to keep pushing on, under and around the Lock button on-screen. It will eventually unlock itself but it takes quite a lot of tapping

orange SPV M5000 won't wake up from standby

I just bought this PDA not long ago, everything seems working perfectly except one thing....everytime when I put my M5000 into standby I can't wake it up. The only solution is to press the reset button then power back on...
btw I have tried diff version of rom but same problem still existing..
anyone here had similar problem plz help !!!
I will be very appreciated.

you are certain to press the 'on' button for a short time ?
and not pressed ( an easy mistake )

Strange, i only have to tap my on button and it will start up, maybe a hard reset?

yes I am 100% sure I did tap my device correctly
I did try hard reset before but still the same
I am currently oversea wont have time to change the new device
thats why I am desparately to get this fone working ....
but I can't stand keep pressing reset button to wake up my device
help guys help ~~~

hey guys anymore suggestion or feedback will be helpful...
i guess none of you guys are as bad luck as me >.<
I am almost going to give up ... help ! somebody help plz

sorry i don't have a clue...
cant you assign wake up to another button, in the registry ??

how do you change the registry?

Same problem here..any solutions for this?

Jade clone hard reset issues

Hey guys,
I think there are some issues with the recent clones not hard resetting. I was a very happy jade clone owner until it happened to me as well. My phone stopped booting and I wanted to hard reset but it wouldn't let me. It seems I'm not the only one either;
http://www.dealextreme.com/forums/Forums.dx/Forum.25045~threadid.439141
http://www.dealextreme.com/forums/Forums.dx/Forum.25045~threadid.464585
I suspect the [green + red + on button] never worked for my clone in the first place and this one has a different button combination but I never tested it before running into issues. We know there's a few different versions of the phone. Mine has the following specifics;
- Unlike other phones, when starting up, mine shows the words "smart mobility" before showing the windows boot logo.
- The phone says that it has a QUALCOMM 7225 @ 528mhz processor (this could perhaps be spoofed in windows to make it look more like a real jade?)
- Mine had a menu option called "GPS Setting" in the settings menu while some other people don't (may be pre-installed software, something to do with A-gps)
At least two things that could be done (maybe more?);
1. Would someone with a working phone similar to mine (especially if it says "smart mobility" at boot) to test the [green + red + on button] hard reset method? Someone else will have to tell you if you can cancel out of hard resetting after testing because I have never been successful.
2. Perhaps someone with Chinese knowledge could look on the chinese forums like 999ppc.com if they have something to say about it. Or maybe ask the Chinese sellers. Most webshops seem to be resellers and know nothing about the product.
Just when I started falling in love with my phone, she dies a horrible death. Oh what tragedy I would appreciate any input you guys might have. Thanks a lot guys.

Interesting info
Guys, I found some interesting information;
Holding green + OK and then pressing power brings up the "calibrating" screen.
Holding red + OK and then pressing power brings up the "downloading" screen.
Does anyone else have this too?
In both modes you can connect the phone to USB and Windows will try to recognize the phone but fails. I highly suspect they are both meant for sending data from PC to the phone and vice versa because the phone turns off as soon as you disconnect the cable. Anyone know what these modes do? Can this perhaps be useful for recovery?
Also, wasn't holding green + OK and then pressing power supposed to be the way to install a new Windows Mobile rom? It seems more and more likely that this phone has a different hard reset command but I haven't found it yet...
This is my first PPC so I would really appreciate any input you guys have on this. Thanks.

Solution found
After a LOT of trying out different button combinations, I finally found it. I was convinced that the button combinations on this phone were simply different and they were!
To hard reset the phone to manufacturer settings:
volume down key (on side of phone) + RED key + power button
You will see a menu where you have to press the up-key (not the volume up key but the up key on the directional pad) to confirm. Next it will look like the phone is starting up and hanging as usual, but just WAIT. Do NOT pull out the battery or anything. It is working. After a short while the phone will turn itself off. Now press the red reset button next to the battery and it will start!
BONUS:
You can install a different Windows Mobile rom with the following key combination:
volume down key (on side of phone) + GREEN key + power button
You have to have the rom (SMART.UPR) on your SD card (non-SDHC, fat16 formatted). I did NOT try this but it should be relatively safe as you can always do a hard reset if you screw up. Since these phones are different, the normal roms *might* not work, but I suspect they will. Personally I don't care for WM6.5 so I'm not gonna try it.

Glacius0,
Thanks for the info. I believe I've the same version phone as you do, got mine for a week now - only setup phone, wifi, weather so far.
I see the same features you've listed, i.e "smart mobility" at start up, QUALCOMM 7225 @ 528mhz processor? and "GPS Setting" in system settings.
So that's the reason the various hard-reset button combos in manual and DX forum don't work. Your button combo worked on my 2nd try. By the way this is providing the same result as the "clean boot" routine in system settings for me.
Unfortunately both methods of hard-reset are not removing the pre-installed touchflo version V1. I'm getting errors installing version 2.0 over version 1. I guess V1 was burned/flashed-in with Win6.1 in the ROM? I think my next step is flashing it with a clean Win6.1 in order to proceed.

After a hard reset it will automatically start installing a bunch of software like opera 9.5 and what not. Maybe you can cancel this by pressing the red button or the X in the corner and then it won't install touchflo. Personally I use SPB mobile shell so I didn't run into any problems. Installing a fresh WM6.1 oughta work though. Let me know how it went.

mine work when i press green button + red button + power
but it show an screen saying
UPDATE MENU
1-Update logo
2-Update OS
3-Update Eboot
4-Format User Space
5-Return
i tried every option in the menu
i put the smart.upr in the SD fat16 but it doesn't work

Glacius0 said:
ry this but it should be relatively safe as you can always do a hard reset if you screw up. Since these phones are different, the normal roms *might* not work, but I suspect they will. Personally I don't care for WM6.5 so I'm not gonna try it.
Click to expand...
Click to collapse
I have the same Qualcomm 7225, initial logo is Smart Mobility and then HTC (or maybe HTC comes before Smart Mobility), clone bought from DX.
Have not tried any flashing yet.

Oh no, after I installed an app, my phone is now stucked at the HTC logo (after the Smart Mobility logo and the little music played).
I have the Qualcomm 7225 version frm DX.
I remove battery and reset, but the phone stucks at the HTC logo (after the music).
Doing ALL the reset keys combination in this thread did not reset the phone (whether the phone is on or off before the combination is pressed and hold down).
Can somebody please let me know what else should I tried to reset/reflash this phone ?

Hey Sintoo,
I just saw your thread on Dealextreme as well. Your phone does seem a little different because I don't get a sound or HTC logo when booting up. Interesting that "volume UP + volume DOWN + power" does something for you. I would never have thought of trying that. It doesn't seem to be the combination to hard reset your phone though. It does however show that there's some functionality to be found if you get the right button combination, so I suggest you try a lot of them. I'll give you a few pointers (the phone should be off btw, but I think you know that by now):
1. It seems that almost all button combinations involve 2 buttons + the power button. So try this first. Later you could try more buttons but it's not likely that this is necessary.
2. The 4-point directional pad (around the center button) doesn't seem to be used too often but sometimes it is, so try that too after trying the other buttons.
3. Some phones also involve the red reset button inside the phone, but I don't think it applies to this one because all it seems to do is cut the power from the battery. You might wanna try it as a last resort.
4. You could write down a scheme on which you mark all the button combinations you can try. This sounds excessive but I had the same problem as you and I almost forgot to use the volume buttons because I was just trying random stuff.
Your next best bet is figuring out how the updating menu that you found works but I think that's gonna be a lot tougher to figure out. It seems like you either got the wrong rom file or the wrong file name. Try placing a dummy SMART.UPR file and see if it does anything different. Also there's a program called TouchRUU which supposedly let's you update your phone through USB in some cases but I've never gotten it to work. Good luck and make sure to report back here for future users with similar issues!
PS: Don't worry too much because dealextreme has a good return-policy, so even if you can't fix it I'm sure they'll take the phone back and replace it for you. I've been buying from them for years.

..
Thanks Glacius0.
I will keep trying.

Hard reset
Hi, I am trying to make a hard reset but nothing happend.
Only, pressing LOW VOL + POWER + Red button (inside) produce a white screen and the USB loader.
But for now I need a simple HARD RESET . With my AXIM X51V the same buttons is SD ROM loader. Hard Reset is only Power and Reset buttons, but don't work wuth the Jade Clone T3232.
The clone has a MARVEL 624 MHz and 128Mb RAM PDA version V03.06.00 PDA built S0907151858(1.109)_BV.
Any idea?

Thanks Glacius0.
work for me

This probably won't work, but... try renaming the smart.upr file to JADEIMG.nbh

reset keys combination
sintoo said:
Oh no, after I installed an app, my phone is now stucked at the HTC logo (after the Smart Mobility logo and the little music played).
I have the Qualcomm 7225 version frm DX.
I remove battery and reset, but the phone stucks at the HTC logo (after the music).
Doing ALL the reset keys combination in this thread did not reset the phone (whether the phone is on or off before the combination is pressed and hold down).
Can somebody please let me know what else should I tried to reset/reflash this phone ?
Click to expand...
Click to collapse
Welcome to the club
For two days I trying all the combination and nothing, only "Smart Mobility" logo and the little music played.
Very sad story

Scooter_ID said:
Welcome to the club
For two days I trying all the combination and nothing, only "Smart Mobility" logo and the little music played.
Very sad story
Click to expand...
Click to collapse
Mine still boots but I have the same problem in which the new clone I have doesn't respond to any key combinations people have said on these forums.
Version info:
ROM 01.001.1 CHS
ROM DATE 9/30/2009
RADIO VERSION 1.07.9291
Has anybody tried combinations including the reset button on the back? I tried a few combinations but when I damaged my volume down button I decided to stop.

Try to release the power botton after pull the three bottons in a combination , it works for me.........

hty cloned htc touch 3g t3232
i have a hty cloned htc touch 3g t3232 , it has freezed on wm6.1 logo screen , when i tried hard reset by pressing red key+volume down+ power , it asked if i want to reset it i should press volume up , i pushed it , the phone restart, but it still freezed, when i call my phone number from other [hone , my uty rings , but i cant see anything

i have jade clone...
Version info:
ROM 01.001.1 CHS
ROM DATE 9/30/2009
RADIO VERSION 1.07.9291
i tryed many combinations, but cant start bootloader can anybody help?

For Dadiio;5231139 Said:
"mine work when i press green button + red button + power
but it show an screen saying
UPDATE MENU
1-Update logo
2-Update OS
3-Update Eboot
4-Format User Space
5-Return
i tried every option in the menu
i put the smart.upr in the SD fat16 but it doesn't work"
I have the same MENU, bro, and for me didn't work too. I've tried every key combos on this forum on topic think I have received a clone t3232 and still dosn't work. Someone have any idea?

Sequence keys for calibrating and downloading mode of jade clone T3238+ with qualcomm cpu:
Downloading mode = red button + volume up + reset
Calibrating mode = red button + volume down + reset
Hard reset: green + red button + reset (or poweron) and up of wheel for confirmation
Updating mode = volumeup + volumedown + reset (only from sd)
I don't know filename correctly for flashing rom :-(
I'm searching rom 6.1 or 6.5 for my device anyone can help me?
Jade clone T3238+ cpu qualcomm 528 MHz
RAM = 192
ROM = 256
Gsensor = present
Wifi = present
Bluetooth = present
Gps = present
Radio FM = absent
Other question: headphones wired are mono. But it's headphones because i have tested with signal test injection. I'm not sure if output is mono.
Thank you.
I have a question. In driver section i see fm driver but not application

Chinese clon HTC Pharos P3470 / dopod P660 Hard Reset

Finally, and after a lot of web search and tries, i could discover how to make a hard reset of this chinese clon of the pharos.
it was hard for me, cause im newbie, so if someone else needs to hard reset his phone, here is the anser!
1.- enter the "Calibrating..." screen by turning the device on with the call key (green) pressed, u will see a white screen with an image of a screwdriver and a key and the "calibrating..." letters, here u can release the keys.
2.- then press both red and green keys, and without releasing, press the back "reset" button. then release the reset button, and next release the other 2 buttons.
in this step nothing seems to happen, thats why its hard to find this is the right way to hard reset this chinese device.
and thats all, your phone starts normally as the first time!
u also can do a hard reset from the windows settings, but this time my windows hanged up when loading
i also discovered that turning this device ON with the end call key (red) pressed, it enters in a white screen with an icon of a hdd with a green arrow facing down to the hdd with the "downloading..." letters under it.
i think this could be the bootloader for this device, but i dont know how to go beyond this point.
the pc cant install its drivers when i plug the usb (and in normal mode it syncs well with the ActiveSync).
maybe i should put the rom files in the SD card, but i dont know where (in wich folder) or wich files...
SO if someone knows how to flash one of this devices, please tell!!
hope someone find this util, and sorry for explaining it sooo long, english is not my mother talk, so if someone wanna translate this (and explain it shorter) feel free to do it!

Hard Reset
hello!
I also have a problem with this phone clon HTC P3470. I installed HTCHome 2.1 and since then it is restarting or freezing before I can do anything. And even with yours instructions I can't do hard reset. I think that I am doing something wrong and I beg you if you can provide me a pictures where to push, because I can't make it.
Thank you!

RE: pictures
thats the same i tryed to install, and as the htc intructions to hard reset it didnt work for that phone i thougt it was lost.
i think maybe different manufacturers build this phone, so maybe yours have a different key combination to hard reset it.
did you reach any of the "downloaing..." or "calibrating..." screens? or you didnt reach that screens neither?
i will post some pics as soon as possible to help you, but in the meantime, you can search and try different key combinations for different phones, it didnt work for me, but trying and trying i discovered this one.
i found a page with a list of the most common combinations for different phone brands and model, but i dont remember its address, just google it, maybe that helps you!

Thank you for your help!
Unfortunately I didn't get any any of the "downloading..." or "calibrating..." screens. When do I need to do hard reset - phone is off or must be on (windows are loading, after that it freezes and restarts).
"1.- enter the "Calibrating..." screen by turning the device on with the call key (green) pressed, u will see a white screen with an image of a screwdriver and a key and the "calibrating..." letters, here u can release the keys." I can't turn on my device with call key, only with power key. And (sorry) but I didn't find reset button, thats why I would like see pictures.
I will try more combos.
Thank you for now!