Help! Wizard keyboard and buttons locked after every poweron - 8125, K-JAM, P4300, MDA Vario General

Hi,
Have next problems. After every power-on:
1. opens outlook mail;
2. have keyboard and main buttons locked. Stilus-screen is OK.
after pressing e (internet explorer)button or comm.manager buttons everything is OK;
3. pressing center button in d-pad opens ScreenAlign (as after hardreset), and after completing this continues normally as expexted;
4. cann't hard reset, because Send button don't operates as p.2 above.
It is Qtek 9100 orign.
Have flashed Qtec, T-mobile and Jam latest roms, exact same behavior
Can anybody help?
And sorry my poor english language.
Tiit

Damn...
My wizard acts exactly the same..... I've spent couple of hours to see if there is any solution of this problem on the forum... Well, there isn't.....:/ NOONE wrote a single word.... Even something like "there is no way to fix it, flush your wizard in the toilet"... Experts...

I'm sorry for being so annoyed, anyway i still request for help and I would be grateful if someone could give a tip

try to flash one of the 6 or 6.1 ROMS perhaps? If that doesnt fix it, then I dont know what to tell you!

I have this issue too. The only thing that works is to keep pushing on, under and around the Lock button on-screen. It will eventually unlock itself but it takes quite a lot of tapping

Related

on/off button doesn't react...

Just bought mij S100 and already a problem. My phone automatically shuts down the display, this is nothing strange. But when I want to turn it back on again using the on/off button, sometimes it does not react (sometimes it does). When this happens, i also cannot receive any calls. I tried to call myself with another phone and it did not ring. It looks like a crash to me. When I do a soft reset it works again.
I have the newest Qtek rom (1.12.00 WWE / 1.12.550 WWE) installed. Originally the phone came with T-mobile software.
I hope someone can help me with this problem.
If there is a problem with the power button, then you can go into Settings - Button Lock - do not lock buttons. This way you can turn on your device using any of the green or red buttons.
hi robbertje,
sometimes i have the same problem on my MDA compact (=imate S100).
on/off button does not respond - display dark.
soft reset resets the MDAc and everything is ok.
then a few days no problems. if this problem occours then more times.
I found out that if my MDAc is in this state and if I pull the SD Card out of the device, the screen is on but frozen. The time which is shown an the screen is not correct. Seems that it shows the time when the device went to the freeze status.
Also battery is very low after such problems.
I used to have it when I first upgraded to big storage. A hard reset seemed to fix the problem. What I found was that the screen would react, but it could be up to a minute after I hit the power button. Same thing when the screen was on, I'd hit Start and wait. After a while the start menu would pop up. This was before I even managed to install any other software so it's a windows bug that's fairly random. I haven't had it happen for a few months now, though.
I think PPCProfiles made the problem. I reinstalled PPCProfiles and it seems that the problem is solved but I will see ..................
Hey, I've already ur problem. It's an hardware problem!
The mess is that, when the PDA is cold (strange, huh?) it won't reactivate, causing to do a soft reset. Mystically, the LEDs are still functioning (I mean, if it's green, it will continue to blink BUT doesn't change for any reason)
The only way to fix it is to send it to the repairing center. Sorry for who is out of warranty.
Cheers,
MocciJ
new ROM?
In this topic: http://forum.xda-developers.com/viewtopic.php?t=25761 it is said a new ROM wil fix the problem ...
Is this possible?
check http://forum.xda-developers.com/viewtopic.php?t=27956&highlight= too - may not be relevant, but it shows that power button wierdness can actually be the result of a dodgy battery.
remove your battery,and wait 1 day,my problem solved this method...

Device Lock problems with 2.17 wwe

Hi there! I hope anyone of you has a solution for my problem; it is really annoying. I have a QTEK 9100, which I have recently upgraded to the latest English version 2.17 using aWizard. Everything was working just like a charm. But I have a weird problem. When I turn on the device lock (on today screen) and don't use the device until it turns off, I cannot get It out of sleep mode. No chance to unlock again... all I can do is a soft reset and this is not too amusing (at least for me :wink: ). Do I miss something elementary?
Any hints to solve this are warmly welcome!
I know that this won't solve your current problem, but you might want to upgrade to the latest ( German ) QTEK 2.18
I ran the 2.17 ENGLISH before, without problems and flashed my MDA VARIO last night to the 2.18 GERMAN QTEK - works like a charm too!
Thanks dreamboxer! I've tried that yesterday evening, but the result has been the same. Could you try something for me? Turn the device lock on (today screen), then wait until the device "turns off". After a while (around 5 minutes) try to turn it back on. In my case the device does not respond and I have to soft reset. Thanks if you have the time!
there's no problem with device lock today plugin in this and any version rom. turn the device on (by pressing the power button) then pres left softkey (Unlock) and finaly TAP the Unlock button on the screen. if this isn't working there's might be some third party app you're using that is making a problem.
Hi dddrko
Thanks for your answer. Your instructions are exactly what I was trying to do. I have no third party applications installed at all for limiting the cause of the problem. When I press the power button to turn the device back on, there is no softbutton because the device hung up. Sometimes I see the soft button, but after using it the screen turns white and I have to soft reset.
Thank you anyway for your help!
endeler
i think i have the same problem, but i think you will find that the device does not hang but rather the backlight turns off and it is not possible to turn the backlight back on with a screen tap. what i have to do is look very carefully and go into settings -> backlight -> and turn it back up to the top of the slider!
Thanks s4vva; I've had that problem every once in a while as well. I wonder if I am the only person having this problem. Can anybody confirm not having this issue please?
Thank you!

9100 rom upgrade: can't switch off

Hello,
I upgraded my ROM from QTEK web Site last week (2.17.7.6 FRE). Everything is running smoothly, but for one:
In the POWER control panel, I set up the Wizard to shut down after one minute when battery powered, but it doesn't.
So when the phone is in my pocket and rings, it wakes up and doesn't shut down. As a consequences, buttons are pushed inadvertently.
It used to work very fine before the ROM upgrade. I Hate using the 'lock' function, because I have to manually lock and then press many buttons on screen to unlock. I tried changing the settings many times, rebooting, etc, with no luck. The control panel for backlight control does work.
Does anyone have an idea of what's wrong?
Thanks in advance,
Guillaume
By "switch off" I meant "stand by".
Sorry for my english...
First Soft reset your device, see if it can "stand by", if it can, try to lunch the "Camera" and close it, try to "stand by" again, ifyou cannot, That 's the probem also with me. hope they will fix this in the next release, BTW did any one success to run the O2 2.21 on Qtek 9100, if someone do, please tell us how can you get it, since I have no way to unlock the CID.

Big problem!!!

I have a huge problem with my MDA compact III. The problem is, I have to hardreset my device almost everyday. Thats because all of a sudden the device acts strange and won't open almost every program. When I softreset the device then, the device won't pick u a signal. In stead of showing how strong the signal is, it diplays a !. Also after the softreset sms, mms or my mailaccount is deleted. I have never spoken anyone with the same problem or anyone with a solution. I only have Windows Live Messenger installed, but many people have and none of them have my problem so that doesn't seeme to cause this problem. It's really annoying and it's getting worse by the day. Yesterday I had to reset my device 3 times(!).. If anyone knows this problem or more important, knows a sollution, please share it with me cause i'm close to driving my car over my MDA
Tom
Are you doing an actual hard reset where you hold the two soft keys on either side of the chome wheel, then hit the sunken button on the left side with your stylus while holding the two soft keys and then confirming with the green talk key? If so, sounds like a hardware problem.
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Tom
Sounds like you are using the 'clear storage' option. Try the actual hard reset procedure and see if that fixes things...thats how I do it.
I just performed a hardreset using the the softkeys. I hope this will make a difference and solves my problem. If not, my MDA gets his first swimminglesson and I'll contact my insurancecompany.
I'll let you know it worked out. Thanks for you're help
Tomschayk said:
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Click to expand...
Click to collapse
As far as I know, this 'opslag wissen' is the equivalent of a hard reset. So it should not make any difference, unfortunately.
no it didn't make a difference. had to be hardreset allready. going over to plan b, allready filling the bathtub.
If you do teach it to swim, however, please post pictures.

Please HELP

I have an 8125 Wizard with WM6 RC5.
The phone was working fine until about a week ago.
Now the smart keys do not work but randomly start working after I press the key on the left above the volume control...as if it activates them. The messaging and internet keys never work anymore.
On the keyboard. it works sometimes and sometimes it doesnt. When it does not all the keys work...a few letters do not respond.
When the phone screen is activated by pressing power button when phone is on "hibernating mode" the today screen opens...then after about 1 second the software configered to the Email softkey opens and then closes.
Can anyone help...I have reset the device using clear storage...would I need to Hard reset, will that help. I had battery status installed and it also overclocked to 247....could that be a reason. I have now removed battery status. PLS HELP
the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535
the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535
so pls does any1 have a solution
Two things:
First, remember this is a bulletin board. Sometimes it takes time for people to get around to reading your post. Sometimes, 50 people will read your post before someone will bother to answer, and even then, the answer may not be a solution to your particular problem.
Second, as you saw on the other threads, I recommend opening and cleaning your button contacts. People are constantly surprised by the need for this, but if you have anything resembling an active life, you probably need to do this about once every six months.

Categories

Resources