I remember there was an option in windows mobile 6.1 and 6.5 in my old HTC diamond 2 where you could remove a "check" in battery section so that it isn't charged when you connect your mobile to PC for activesync. This option seems to be unavailable for Omnia II.
My rom is official 6.5 winmo.
Any idea?
Related
Has any one got the above working ?
Whenever i run the setup program
C:\Windows\WindowsMobile\setup.exe
I get the message Windows Mobile Device Center Could not be installed because at leat one windows componebnt is missing
What do i do to fix this inorder to sync my phone with my pc ?
enclosed is a screen shot of device mgr
regards
mark
Strange, Mobile center is preinstalled on the Windows vista.
What version of vista are you using?
Have you tried to install activesync 4.5?
version of vista is BusinessN
I have not installed active sync 4.5 since microsoft are saying the the new product to use is Mobile device centre and active sync does not work
my phone is the Atom Exec
could try re-installing WMDC from the microsoft website http://www.microsoft.com/windowsmobile/devicecenter.mspx
Warning: This would require using the winows genuine advantage tool.
still does not work
Still dosn't even install?
Dissapointing. I was thinking how nice it was to be free of Activesync.
Has the Artmeins been connected to windows yet? did it attempt to recognise new device and install drivers?
On a side note it's nice that Microsoft put so much effort into improving their error messages. A windows component is missing eh? er which one!!!
PS. This may sound crazy, but have you attempted to connect the Artemis with it switched off. I allways had trouble connecting windows Mobile devices with them turned on, but never had same difficulties with the device in standby, I now do this automatically, so can't comment on if it happens still in Vista. The issue was that when on, often the device was not recognised.
Hi, I have a problem with windows mobile based device driver.
When i connect hermes 200 smart phone compare a yellow mark on windows mobile based device card and don't start active sync.
I tryed to reinstall active sync but nothing.
I disabled also the AVG antivirus.
Can some one halp me ?
thanks a lot
paolinjo
Windows (XP & 7 X86) does not recognize my HTC P3600 (Bootloader and WM5Storage too), I do not know what's going on, after connect to pc - the battery charging (orange light), through bluetooth connect normally to ActiveSync, WMDC.
P.S. I did Hard-Reset
Thanks.
try this:
go to Start\Settings\System\USB to PC
un-check the option "Enable advanced network functionality"
hope it might help
or try to delete htc_3600 in the devices list (control panel) and sync it again
Code:
try this:
go to Start\Settings\System\USB to PC
un-check the option "Enable advanced network functionality"
Done - don't work. :/
Code:
delete htc_3600 in the devices list (control panel) and sync it again
i haven't got any htc/ppc device in my devices list... :/
in my Vista it's "mobile devices"->"Pocket_PC"
try this:
1. go to "Windows Mobile Device Center"
2. click "Connection settings"
3. put a tick on "Allow USB connections" if it's not
It also did not help, I do not know what's going on - it can hardware? But it's charging battery... :/
Please, anyone? :/
Hi,
Did you solve this problem? My wifes Diamond connects well with Win 7 RC, but my P3600 doesn't.
Martin
Solution for sync problem on W7
MartinTrinity said:
Hi,
Did you solve this problem? My wifes Diamond connects well with Win 7 RC, but my P3600 doesn't.
Martin
Click to expand...
Click to collapse
1. You must remove every partnerships with all the mobile devices.
2. Completely uninstall Windows Mobile Device Center.
3. Reboot W7.
4. Install the most recent version from Microsoft download site.
5. Reboot W7 (Not necessary but preferable).
6. Connect Mobile Device and wait for it to setup completely.
That should solve.
Thanks for the reply, I did all that and more....
The Mobile Centre did not install very well, but, just one hour after I asked you (and a boot because of a Windows update), the phone was recognized and everything synced fine.
Go figure!
Hello,
This is maybe a late response but my p3600 doesn`t sync with W7 WMDC.
Everthing is going good till the sync.The arrows are turning but nothing happens after that.
Someone a solution??
Steinie
p3600 sync problem W7
Hello,
This is maybe a late response but my p3600 doesn`t sync with W7 WMDC.
Everthing is going good till the sync.The arrows are turning but nothing happens after that.
Someone a solution??
Steinie
Hi there everyone. I'm having some problems synchronizing my TD2 that I would really appretiate some help with.
I'm using a pretty vanilla TD2, retail with no significant changes. I was synchronizing it with Outlook 2003 on my previous PC with no problems what so ever. Now, i've moved across to Windows 7 (64bit Enterprise) and Office 2007, and I cannot for the life of me get it working.
I've tried a number of things, including changing over the "Enable faster data synchronizing" option under USB to PC connections, upgrading to the new WM6.5 rom, and even connecting via bluetooth - all in vain.
Does anyone have any idea as to whats going wrong, and how I can go about correcting it?
Thanks in advance for any help with this issue.
Make sure you have Windows Mobile Device Centre 6.1 installed as Active sync won't work with 7.
WMD Centre
Hi
I have Windows 7 64 bit and mine works better than Vista.
Go to this link:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
Download appropriate version (32bit or 64 bit). Install it. Then plug in your TD2. Make sure you see some sort of notification on your phone and your PC that it has picked up the device. Wait for any configuration to occur.
Go to Windows Update and check if you need to install any HTC Usb device driver. If so install that too.
Restart once all installed. Plug in your TD2 into computer and activate Windows Mobile Device Centre and follow the prompts.
Oh and open activesync on your TD2 and check you haven't more than the 2 partnerships otherwise this causes problems too.
Cheers
Aussie
Hi,
I have installed Android 2.3 on my HTC HD2. Right now, I do not have wifi at my home and i am using an ASDL Ethernet connection to my PC.
Earlier while using Windows 6.5, I used ActiveSync for this purpose. ActiveSync allows us to share PC (desktop) internet on phone using USB cable.
Is there any way i can connect to internet on my phone using internet from PC using USB cable (using ANDROID) (as was working for Microsoft ActiveSync)?
Thanks
Rajiv
No easy way...
try http://www.codeproject.com/KB/android/UsbPortForwarding.aspx
I also wanted this feature missing from wm ,But finally opt for wireless router ..
I'm currently using "MccMBoxmaX GS V7.0 Gingerbread 2.3.3[Sense 2.1+3.0]3D Effect" and it has an option called "Internet pass through" when u connect your HD2 to the computer, I believe this is a Sense 3 feature so all builds based on this new sense has it too. I tried to test it first to see if it works, and it works
But first of all you need to download "HTC Sync" Version 3 to install the required drivers for your HD2.
Second of all, make sure your firewall on your PC isn't going to block the new installed application from sending and receiving data from the internet to your HD2.
Finally you enable "data pass through" option on your HD2 after you connect the usb cable of course and that's it!.
hopes this helped you...
Been wanting this feature on Android forever!
But I like my CLK Typhoon builds.