Hi everyone,
I would like to connect to my laptop next room from local network. I can connect perfectly when I type in my IP address into the first textbox (Computer), but I can't connect when I type in my Computer Name (full computer name) instead. I tried MyPCName as Computer, \\MyPCName as Computer, forwarding port 3389 to my IP, leaving domain name empty, putting in my workgroup name as a domain, putting in my computer name as a domain, putting in myPCName\MyUserName as Username, \\MyPCName as Computer, still the same. It won't connect unless I put in the IP address. I would like to do this since my workplace assigns a different IP to my laptop then I assign at home, but naturally I have the same computer name at both places, so I would like to have a permanent setting for both places.
I'm running Windows 7 64 bit on my laptop and 1.66.405.2 ROM on my HTC HD2.
Many thanks in advance.
can you connect to it ok using another computer? might be a dns issue at a guess...
I can connect from other computers fine. Also on my HD2 I can see the host names of PC's under Resco Explorer and map them. However, remote desktop mobile refuses to work with the Computer Name. I can ping my Laptop's IP and also Computer name from pingbox2. Only in Remote Desktop Mobile there is a problem.
windows 7 by default blocks remote desktop connections from different versions of remote desktop. if you right click computer and select properties, then choose remote settings on the right hand side and select the middle option (accept connections from all verions of remote desktop). havent tried this my self but it solves most issues when using different versions of windows
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. If I don't disable 3G, I can only connect with IP and not computer name. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
For me it works with MyPCName in computer and empty domain, both for XP and 7.
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
ozkaya said:
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
Click to expand...
Click to collapse
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
tomallen35 said:
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
Click to expand...
Click to collapse
I think you're right, when the 3G is on (and also Wifi on), Resco shows computers from all around the country when I click computers near me and not my local network. When only wifi is on I can see my local computers. 3G probably has precedence over Wifi? How can I correct this?
samsamuel said:
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
Click to expand...
Click to collapse
But the 66.whatever address is generic openDNS lookup IP and same for everyone. Are you suggesting me to route this IP to my local IP, i.e. 192.168.x.x? Oh, one more thing, I can also connect when 3g and wifi are both on, but only through computer's IP and not computer name. Can you connect with computer name while both are on and connected?
when your phone does a dns lookup on the name it resolves to the open dns assigned address (not the same for everyone, otherwise the open fns system wouldn't work) so to connect to your computer the phone sends its request to open dns who forward that request to your current actual address.at home that address is your home ip address BUT it isn't your laptops address it is your routers address.(stop reading here if you don't have a router).
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
samsamuel said:
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
Click to expand...
Click to collapse
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
kilrah said:
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
Click to expand...
Click to collapse
you're totally right, I have a router and its port is forwarded to my laptop IP, but this is only good (and works well too) when I want to connect from Internet to my local network. I tried OpenDNS exceptions for VPN and defined an exception named as MyComputerName but it didn't work. Then I tried a dyndns solution, but it only works for external connections and not local network, i.e. it can't map local IP's. What I need is a dynamic client which can update my local IP.
I also tried to edit hosts entry in the registry with MyComputerName. It works for a single IP, but I'm not sure if I can write multiple IP adresses (my work and home local IP) into that. If I could maybe everything would be OK.
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
kilrah said:
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
Click to expand...
Click to collapse
thank you very much for your time, I appreciate it. You're right in that waiting a bit resolves the issue (it's a bit more than 30 secs for me that's why I thought it wasn't working when 3G is enabled) but only when OpenDNS is not used. I assume you don't use OpenDNS, right? Once I put that one into equation, it takes over NetBIOS protocol and returns its IP instead of the local IP(192.168.x.x). As far as I understand, DNS lookup has precedence over NETBIOS and if the name is not found in DNS it consults NETBIOS protocol. However OpenDNS has this nice "feature" where it finds the name with its own IP. There are several posts about this on its webpage and they say to either disable the typo correction or put exceptions for Netbios names, but sadly none of them works for me right now.
Nope, no OpenDNS, never actually heard of it.
How does it work? Do you enter their DNS server address in the network settings of your pc/phone, or is it an app you run?
you click Start/Settings/All Settings/Connections/Wifi/First Button/Switch to Network Adapters tab/Select Broadcom 802.11 DHD Network Adapter/Switch to Name Servers Tab/Type in 208.67.222.222 for primary DNS and 208.67.220.220 for secondary DNS, click OK. that's all. Could you try if it's not so much trouble? Thanks.
OK, remote desktop doesn't work either with the OpenDNS servers in.
I'm pretty sure it must be a limitation of the remote desktop app itself, as resco explorer can still navigate and/or discover the network shares of my other PCs with no problem. NBTStatCE also finds everybody.
Wouldn't even surprise me, as that Remote desktop mobile has always been troublesome. I don't remember exactly, but in the WM5 days it was pretty much impossible to use on a local network due to a weird handling of names... if I remember well all "local" (NetBIOS) addresses without a '.' entered in the remote desktop app would be redirected to the "Work" connection, while "remote" ones with a period would be directed on the "Internet" connection. As a network card can only be defined as one of them, if you wanted it to work in both cases through Wifi you had to switch the card from Work to Internet and back all the time. And of course when it's on Work it breaks some other things that use the default system handling like mail.
Related
O.k. I've exhausted all the resources I have found on the net to troubleshoot my VPN problems myself so can someone please help me figure out why this isn't working.
I have a VPN set up on my home desktop that I can connect to fine with my laptop (both XP home SP2). When i connect with my Verizon XV8600, the connection is stable, no trouble logging on and no timeouts, but I can't access any of the shares on my desktop. I go to file explorer and try to open a path, same as I do when connected at home via wifi, and I get "The network path was not found" and "Network resource cannot be found or you do not have permission to access the network".
I'm connecting via PPTP, I have tried with my network adapter set to "The Internet" and "Work". Under the advanced tab in connections under the "Select Networks" button I have tried both the "My Work Network" and a new network I set up for the private network selection.
It's just diving me nuts because it connects every time and stays connected, but I can't do jack with it. What am I missing people? Any help would be greatly appreciated, this is the last hurdle to having my phone set up the way I want it.
Firewall?
One area to question would be weather you have a firewall or some type of security agent blocking data access on the VPN port of your laptop. Possible?
many routers also need to be setup to pass vpn
lub2lrn said:
One area to question would be weather you have a firewall or some type of security agent blocking data access on the VPN port of your laptop. Possible?
Click to expand...
Click to collapse
The VPN is set up on my desktop and my laptop connects just fine. The trouble I'm having is getting my phone to connect properly.
Rudegar said:
many routers also need to be setup to pass vpn
Click to expand...
Click to collapse
I've set up the port forwarding on the router, the phone connects, it even shows up under the network neighborhood on the desktop when it's connected. I just can't seem to access my shared folders.
animez said:
I've set up the port forwarding on the router, the phone connects, it even shows up under the network neighborhood on the desktop when it's connected. I just can't seem to access my shared folders.
Click to expand...
Click to collapse
Which ports did you forward? And which router/firmware do you have?
It's not enough just to forward port 1723 you need to enable the GRE protocol (type 47) also. Without enabling it (GRE protocol) the computer from outside connects, you see it in your logs, but it actually can do nothing.
Falcon2008 said:
Which ports did you forward? And which router/firmware do you have?
It's not enough just to forward port 1723 you need to enable the GRE protocol (type 47) also. Without enabling it (GRE protocol) the computer from outside connects, you see it in your logs, but it actually can do nothing.
Click to expand...
Click to collapse
The router is a linksys wrt54g v8 with firmware 8.00.5, yes pptp-passthrough is enabled.
I did a bit more research on GRE and my particular router and have come away confused. Some sites say it doesn't work at all on the wrt54g, but according to them it shouldn't even work on my laptop. I can stream music from an external ip on my laptop and browse all my shares so it seems like its working to me.
There must be something different about how the phone uses that protocol that the router is screwing up. Most of the forum posts seem to suggest that GRE on a lot of linksys routers is spotty at best. I'm thinking about flashing the router with a third party linux firmware (dd-wrt) that supposedly handle GRE properly. Not sure though, don't wanna risk bricking my router just to connect my phone, which I'll probably do once in a blue moon.
I'm trying to figure out how to set up remote desktop... I'm using Kumars rom... not that that makes a difference i dont think. anyways. I'm running Windows 7 on my computer.
start ->
right click on "My Computer" ->
Properties ->
remote settings (top left hand)
remote tab ->
Allow remote assistance connections to this computer box is checked
allow connections from computers running any version of remote desktop (less secure) is checked ->
on to my phone...
i go to remote desktop mobile on it... I've read online that for the Computer dialog box i input my computers IP address... now, is that the IPV4 address that i get from the CMD box after typing IPCONFIG... or is it the address that i get when i browse over to the website www.whatismyipaddress.com ??
what do i put for my user name and password? is it my PC's password and user name? also... my ISP (internet service provider) is Verizon. i currently have their built in wireless modem up and running. i've seen the tutorial on youtube of how to set up remote desktop by going in to my router and port forwarding numbers... but thats also something i am having trouble with.... ive been cracking my head at this for over 3 hours. can someone please help
Nano3 said:
I'm trying to figure out how to set up remote desktop... I'm using Kumars rom... not that that makes a difference i dont think. anyways. I'm running Windows 7 on my computer.
start ->
right click on "My Computer" ->
Properties ->
remote settings (top left hand)
remote tab ->
Allow remote assistance connections to this computer box is checked
allow connections from computers running any version of remote desktop (less secure) is checked ->
on to my phone...
i go to remote desktop mobile on it... I've read online that for the Computer dialog box i input my computers IP address... now, is that the IPV4 address that i get from the CMD box after typing IPCONFIG... or is it the address that i get when i browse over to the website www.whatismyipaddress.com ??
what do i put for my user name and password? is it my PC's password and user name? also... my ISP (internet service provider) is Verizon. i currently have their built in wireless modem up and running. i've seen the tutorial on youtube of how to set up remote desktop by going in to my router and port forwarding numbers... but thats also something i am having trouble with.... ive been cracking my head at this for over 3 hours. can someone please help
Click to expand...
Click to collapse
For username and password, don't bother with them. You MUST have user logins setup on your PC for this to work. When you eventually do connect to your PC, you'll be presented with the login screen, so you can enter authentication information there instead. Yes, it's your login and password for your PC, but you don't need to worry about that to actually connect.
Without seeing your specific router setup, it's difficult to help with the next part. Go to start, run and type cmd. Type IPCONFIG - this will give you the IP address that your computer has. You need to allow all traffic on port 3389 to go to that IP address. There will be something about port forwarding in your router setup (which I have to assume you know how to access).
If you have trouble, google for the model number of your router and "port forwarding" and you're bound to find a how-to page.
Incidentally, that IP address is your "internal" IP address - the one that your router assigns to your PC so you can communicate with it. When you go to whatismyipaddress it tells you the IP address of your router. You need to connect to that from outside, and the port forwarding says "someone's connecting to me on port 3389 via my external IP address. I've got port forwarding set up to allow traffic on that port to go to an internal IP address." (You may not hear it say that )
this is the screen on my ip router set up
Looks fine. So did you try logging in?
These instructions won't work if you have more than one device in your house using that router and each device will get its own IP from the router, so when a request comes in from the outside network, it won't know which IP to send the request to.
**UNLESS** you're doing it over WIFI from your phone, which would already put you on the inside network so you don't need to worry about that.
Tell us, are you trying to connect using 3G, or are you trying to connect using your in-house WiFi using the router?
zdrux said:
These instructions won't work if you have more than one device in your house using that router and each device will get its own IP from the router, so when a request comes in from the outside network, it won't know which IP to send the request to.
Click to expand...
Click to collapse
Good point - I didn't pick up on the fact that the port forwarding is not asking for an end IP address.
As zdrux says, if you're connecting your HD2 to your wireless network then you can connect to your PC directly, using the internal IP address, as mentioned in the post above.
Nope not working... im getting really irritated. i dont understand why it isnt working. do i need to be connected through my own wifi? or should i disable it?
You don't need to connect via your own wifi, as long as your router is doing it's job properly. It's easier to connect via wifi though, as you can rule out the router completely and at least get it working.
A few questions...
Do you have to log onto windows with a username and password?
Do you have windows firewall on?
What version of Windows 7 is it?
Nano3 said:
Nope not working... im getting really irritated. i dont understand why it isnt working. do i need to be connected through my own wifi? or should i disable it?
Click to expand...
Click to collapse
Nobody will help if you can't answer our questions.
- Are you connecting through 3G, or through you WiFi at home? Where do you get your connection on your phone?! This is important.
- Turn off windows fire-wall completely until you solve this so you know its not getting in the way.
- Go to Control Panel > System and Security > System ..and click on "Remote Settings" in the left pane, once a new window opens up, make sure you check the box where it says "Allow assistance from other computers" and also a little lower where it says "Allow other versions of windows to connect to this computer".
- Go to your router and look for an option where you can set a computer as the DMZ, put in the IP of your computer in that box if you have one of those boxes as an option. This is the IP you see when you type "ipconfig" on your computer.
- Go to www.canyouseeme.org to test if your Remote Desktop port is open. Once you get to that webpage, type in port number 3389 and click "Check", this will confirm if it's an issue with your computer or your phone.
- Like the other person said, if this doesn't work, try connecting your computer without a router. Just get the cable running from the modem straight into your network card, unless you have one of those router/modem all-in-one things.
If you are connecting over the home wifi, then you shouldn't need to go near port forwarding, or indeed your router at all.
the target ip is the PC address you get from cmd - ipconfig (192.168.....) and as johnc said, you can leave user and pass blank and log in directly.
If you are wanting to connect over your phones data, then the target ip is found either by visiting whatismyip or in the router, look for the wan ip address. (Example 82.27.19.187)
and in that case you set up in your router a port forward from external port 3389 to internal address (your pc address from ipconfig) on port 3389.
Hello Everyone,
Not to hijack the thread but, I am having problems using remote desktop also. Maybe you can help.
Host Computer: Notebook
OS: Win xp pro
Connectivity: T-Mobile USA PCM/CIA card gprs/edge/3G
User name has Admin Privileges
In Security Center, Firewall. I made exceptions for Remote Desktop and Remote Assistance.
When I goto www.canyouseeme.org on the notebook on the t-mobile wireless card, Error: I could not see your service on on port 3389 Reason: Connection refused
Client: HD2
Connectivity: T-Mobile USA 3G
On the HD2 I put:
Computer: IP address of the host computer
User name: Name of Admin Privileged User
Password: Password that corresponds to the user name
When I goto www.canyouseeme.org on the HD2, Error: I could not see your service on on port 3389 Reason: Connection refused
1) On the host computer, Must all users be logged off and the computer at the login screen or can I be logged in on an Admin User?
2) If users must be logged off, I can go to Task Manager and disconnect user that will be used to login with remote desktop?
3) T-Mobile USA Blocking ports 3389?
If I log out of the user, I go to the login screen but the wireles connection is terminated.
My Goal:
I have a notebook in my work vehicle on the T-mobile air card (Wireless ) and while I am in a building working, I would like to connect to the notebook in the vehicle with my HD2 instead of walking back and forth or having to carry my notebook with me.
If you need more information, I will do my best to give exact details.
Thank you,
Monnie
You left out a step on the PC.
On the Remote screen setup on the PC you have to add the Login IDs that will be allowed to login remotely.
Hello Everyone,
I called T-mobile usa, spoke with their PDA/Smartphone Tech Support, They could not give me an answer that A) They are blocking ports 3389 or B) They are not blocking ports 3389.
The tech continued to asked me over and over again " did that application come on the phone or you installed it" I told him repeatedly " Remote desktop come loaded on the factory T-mobile ROM"
He then said, they are working with their network dept and directly with HTC
Just a heads up
Thank you,
Monnie
tms02 said:
You left out a step on the PC.
On the Remote screen setup on the PC you have to add the Login IDs that will be allowed to login remotely.
Click to expand...
Click to collapse
You have to connect first before you can even think of logging in. We still didn't get to that part.
MonnieRock said:
Hello Everyone,
I called T-mobile usa, spoke with their PDA/Smartphone Tech Support, They could not give me an answer that A) They are blocking ports 3389 or B) They are not blocking ports 3389.
The tech continued to asked me over and over again " did that application come on the phone or you installed it" I told him repeatedly " Remote desktop come loaded on the factory T-mobile ROM"
He then said, they are working with their network dept and directly with HTC
Just a heads up
Thank you,
Monnie
Click to expand...
Click to collapse
This is irrelevant, the website checks to see if the port on your PC is open, this has nothing to do with the phone (yet). If your port 3389 is open and accepting connections, the website should say so, nothing to do with the phone at this time.
This basically means your computer has port 3389 shut off/blocking, figure out what's doing that and then you can connect.
johncmolyneux said:
You don't need to connect via your own wifi, as long as your router is doing it's job properly. It's easier to connect via wifi though, as you can rule out the router completely and at least get it working.
A few questions...
Do you have to log onto windows with a username and password?
Do you have windows firewall on?
What version of Windows 7 is it?
Click to expand...
Click to collapse
I do have a username and password
windows firewall is on
windows 7 ultimate 64 bit
Not sure if I should post this question here or somewhere else but since I am using my TMOUS HD2 for remote desktop I decide to put this here.
I tried the remote desktop over my own wifi it works great but just wondering if I can use it over 3G... I tried but doesn't seem to be connecting.
Also does anybody know the list of ports that are blocked on tmous 3g? Thanks a lot!
over 3g don't forget you need to use your external ip address, (I.e not the 192.168.... addresses) and then in the router you need to set up port forwarding from the router to your chosen pc.
been looking for a solution to this for a while. Seems people give out solutions that never work.
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
samsamuel said:
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
Click to expand...
Click to collapse
Ugh, I just can't get it. I have data connected at all times. I try this, but I use windows XP (which for some reason almost everyone who shows how to use this on the HD2 uses Windows 7). Port forward to my internal IP address. Set up to connect to my external IP address (yeah im on a network). Always gives me those 3 reasons why it can't connect and I never got it to work. I just dont get it.
what i changed from stock rom to get RDP to work
in settings/connection change your data access point from whatever it is currently (write it down) to wap.voicestream.com and try (for me that also worked for skyfire). some ports/protocalls may be blocked from the default access piont.
Phenomenon said:
Ugh, I just can't get it. I have data connected at all times. I try this, but I use windows XP (which for some reason almost everyone who shows how to use this on the HD2 uses Windows 7). Port forward to my internal IP address. Set up to connect to my external IP address (yeah im on a network). Always gives me those 3 reasons why it can't connect and I never got it to work. I just dont get it.
Click to expand...
Click to collapse
Works fine for me all the time. I have XP Pro.
I've set the IP on my computer to be static (192.168.1.199).
I changed my Remote desktop listening port to 3399 (changes in registry and windows firewall. Also change in Antivirus firewall if you have one.)
I have a linksys router. I've set the port forwarding in "Games and Applications" as all requests to port 3399 will be sent to 192.168.1.199.
I open Remote Desktop on my HD2 and point to my external IP address with the port number.
example: 24.123.456.789:3399
Its been working fine for me for a month. Speed is good too.
samsamuel said:
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
Click to expand...
Click to collapse
To you or anyone else who can do this, are yall using Professional Windows OS? or Home?
pro.
remote desktop isnt included in home. (Maybe in home premium, possibly)
there are work arounds, a 3rd party vpn for instance, or there are ways to get remote desktop onto certain home versions.
samsamuel said:
pro.
remote desktop isnt included in home. (Maybe in home premium, possibly)
there are work arounds, a 3rd party vpn for instance, or there are ways to get remote desktop onto certain home versions.
Click to expand...
Click to collapse
I use this with Win7 Home Premium, which does not have RDC enabled. However, you can simply patch it to enable RDC:
http://thegreenbutton.com/forums/t/79427.aspx?PageIndex=1
I have no problem RDC to that machine from my HD2 from both in and outside of my network. As mentioned, you need to edit your router settings to enable port forwarding to the machine(s) you are trying to access remotely. I use 3389. The above utility that enables RDC on W7HP also enables port 3389 to get through windows firewall on that machine.
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
it's not work,I need help
I tried some times Remote Desktop over 3G ,but it's not work,before I connected , Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.,I actived data connection by use opera browser,and the connection in the top bar,the icon "H" appeared in the top bar,does the Remote Desktop support the connection way of 3G ? please tell me what to do ?thanks a lot ! sorry for my poor english.
Phenomenon said:
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
Click to expand...
Click to collapse
Try connecting to your home computer from another computer outside. Seems to me that your home computer is not setup to allow RD from outside.
kcaj32 said:
Try connecting to your home computer from another computer outside. Seems to me that your home computer is not setup to allow RD from outside.
Click to expand...
Click to collapse
Yes, and phenomenon you should really try to establish the connection first while connected to your home network with your phone, just to make sure everything internal is setup properly before you start messing with getting the external connection to work.
Phenomenon said:
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
Click to expand...
Click to collapse
Your router probably has it's own firewall. Can you connect to your computer through your own network?
I setup splash top for my home network but I need help getting splashtop to work on other networks when I am not at home. Any ideas?
Does anyone have any ideas how to get this to work?
If you got to there website they have instructions on how to set it up for outside networks. It involves setting up port forwarding on your router and getting the main ip address for you internet connection.
http://support-remote.splashtop.com...sys-wireless-g-broadband-router-as-an-example
weems84 said:
If you got to there website they have instructions on how to set it up for outside networks. It involves setting up port forwarding on your router and getting the main ip address for you internet connection.
Connect from Outside - using Linksys Wireless-G Broadband Router as an example : Splashtop Remote - Support
Click to expand...
Click to collapse
I have already followed these directions and still get a failed connection. I can connect fine with home network just not a remote network. Also a little info windows 7 with mcafee virus scanner and firewall. I also have a linksys e1000 router. Anybody know why I cant connect?
You may have already done this, but I needed to setup the entire range of ports (6783 thru 6785) to get mine to work. One mapping per port.
Sent from my Transformer TF101 using Tapatalk
You will to add port forwarding rule on your router. Add 6783-6785 for the port. Make sure the splash top software on your pc under network setting is set to 6783. When you add the ip address you need to add your WAN ip address not your machine ip address. Mac address will need to be that machine youre trying to log into. I have splash top setup to three of my computers at home. Able to access them without no issues from outside of my network. If you are still having issues try to disable your mcafee software and firewall. I have all three on Windows 7 all with firewall enable.
dazz87 said:
You will to add port forwarding rule on your router. Add 6783-6785 for the port. Make sure the splash top software on your pc under network setting is set to 6783. When you add the ip address you need to add your WAN ip address not your machine ip address. Mac address will need to be that machine youre trying to log into. I have splash top setup to three of my computers at home. Able to access them without no issues from outside of my network. If you are still having issues try to disable your mcafee software and firewall. I have all three on Windows 7 all with firewall enable.
Click to expand...
Click to collapse
I will try this when I get home from work. How do I make windows my primary firewall?
Dunno about McAfee, but the firewall shouldn't be causing any issues as long as you allow splashtop connection. I set up separate port forwarding for each one. TCP Any -> ****. Did that three times and it connected.
DKYang said:
Dunno about McAfee, but the firewall shouldn't be causing any issues as long as you allow splashtop connection. I set up separate port forwarding for each one. TCP Any -> ****. Did that three times and it connected.
Click to expand...
Click to collapse
Some you saing port forward each port as in 6873 to 6873, 6874 to 6874, and 6875 to 6875? Do you have a linksys router?
Router model / make won't make a difference to what ports need to be forward, just how you actually go about doing it.
Well I guess I will try to open them individually.
under999 said:
Some you saing port forward each port as in 6873 to 6873, 6874 to 6874, and 6875 to 6875? Do you have a linksys router?
Click to expand...
Click to collapse
I did "Any to 6873" and etc. Just changed the destination port number for each one since "6873 to 6873" didn't work for me.
Are you guys able to connect to your pc from an outside network with the splashtop thats included in the mycloud or did you purchase it from the market?
I have port forwarding set up, added the pc and WAN ip (not local network ip), enabled "internet discovery" in experimental features on splashtop streamer on my pc and its still not working. I have no options to add mac address, just name, ip, password and port.
Splashtop is now $0.99 so i may just go ahead an buy it so i can use it on my other devices as well if the built in one doesn't support this.
Mine works well...after I set the ports to forward.
However someone did warn me about doing this and lack of security...
fone_fanatic said:
Are you guys able to connect to your pc from an outside network with the splashtop thats included in the mycloud or did you purchase it from the market?
Click to expand...
Click to collapse
Yes, I am able to connect from outside of my network. I am using the one that came with the TF. I believe the one that comes with the TF has a custom resolution of 1280x800 just for the TF. Where the one in the Market Place highest resolution is 1024 x 768. I tried both and the TF version looks much better. There is a area when you have to input the mac address for that machine. My port for one of my pc is "6873-6785"
dazz87 said:
Yes, I am able to connect from outside of my network. I am using the one that came with the TF. I believe the one that comes with the TF has a custom resolution of 1280x800 just for the TF. Where the one in the Market Place highest resolution is 1024 x 768. I tried both and the TF version looks much better. There is a area when you have to input the mac address for that machine. My port for one of my pc is "6873-6785"
Click to expand...
Click to collapse
Thanks for that info. Do you remember where you put the mac address because i don't see it when attempting to add a new computer.
UPDATE
Nvm its working, maybe PC was off when I attempted to connect earlier from outside my house. Didn't need to put in Mac address afterall. Just wan IP and password I set and forward the ports.
Thanks guys
fone_fanatic said:
Thanks for that info. Do you remember where you put the mac address because i don't see it when attempting to add a new computer.
UPDATE
Nvm its working, maybe PC was off when I attempted to connect earlier from outside my house. Didn't need to put in Mac address afterall. Just wan IP and password I set and forward the ports.
Thanks guys
Click to expand...
Click to collapse
Cool glad you got it working. Now, I remember its not the mac address its the Wan address. The most important thing is the listening port 6783,6784, etc,etc,, depend on how many pcs you want to access.
I have a simple home net using mostly windows vista and 7 computers, some printers, external hd servers for backup storage and cameras in a workgroup static ip setup behind an off the shelf router. i set one of the computers as the vpn server since i dont want to buy a dedicated hardware vpn in a vista ultimate machine thats on 24/7 anyway with an incomming server... with the correct ports forwarded from the router to the vpn host.
my remote vpn laptop connects to the vpn fine and can see the network resources, however, has no internet connection once the vpn is connected. do i have to set the host vpn computer to do some sort of its own dns assignments to the incomming connection? its set for dhcp so i dont know why it would assign a valid IP to an incomming but not any other info.
in other words, on my remote laptop, i can connect to a random wireless internet hotspot and have full internet access. I can then enable vpn and log in to my home network and see all the network resources, however if i try to use an internet browser, there appears to be no internet. if i disconnect the vpn, the internet resumes to work fine and obviously the vpn resources are no longer accessable.
what am i missing? under incomming connection properties general tab, "allow others to make private..." is checked, under users the correct user is selected along with "require all users to secure...", and under networking ipv4 "allow callers to access..." is checked, and assign ip auto using dhcp is checked so I would think it should be working fine at this point, however it doesn list anywhere a gateway or dns to assine to incomming connections, only ip's.
host vpn computer is vista ultimate with static ip behind a retail router also assigned a static ip via my home isp.
the remote laptop is running ubuntu 12. just for kicks and to rule out ubuntu causing some problem, i set my android phone up for vpn use via 4g network, and the same thing happens. connects vpn fine, has local resources, but loses internet.
i also was curious as to having a vpn log in for the existing user account on the vpn host machine... in other words, should i just add the username on the host computer as a vpn client, and log in vpn using those credentials? and will that even work if that account is logged in, or will i have to remember to log out when im on the road to use the vpn connection.
thanks all!