Hello people,
I have installed sip voip tools in my htc touch, but is not working. The problem is the configuration, I have a sip account of an argentinian provider which uses username, password, and auth id ( or pin), the problem is that the sip tools has only 2 textbox one for the user and the other for the password, and I need to put de "auth ID" which is different of the username, How can I fix this?
Thank you for your help and sorry for my english.
Related
I have jasjar with latest rom from imate.
I have two major problem with my operator: TIM
1. follwing all the instructions about MMS on the TIM website I still get an error, receiving and sending MMS
2. changing the pin, I get "unknown sim error". I tried with two different sim, an old 32kB and a new one 128kB.
Any other italian reader with kaskar and TIM?
thanks
Rosario
Hi, I'm Italian and I get it working.
You need to:
1) set a new connection (I put it in My Work Connection): name timMMS,select a modem:Cellular Line (GPRS,3G),Access Point name: mms.tim.it
2) go to mms configuration (it's in the menu in the messaging centre), and you put the data you can find here: www.i.tim.it/file/0,,774,00.pdf
So server name TIM_mms (or whatsoever), gateway 213.230.130.89, port number 9201, server address http://mms.tim.it/servlets/mms
connect via Work, and IMPORTANT: choose Wap version WAP 1.2, not 2.0 or it doesn't work
Ciao
I configured it in this way too. But no luck, I still get an error after 30 secs sending messages, or retriving it.
Very strange, same sim, same parameters but different phone and everything works great.
I don't understand why in some jasjar they work and in others they don't.
Do you get an error when you try to change the pin code to you sim?
thanks
ciao
anyone of you got the MobileTV working ... which are the RTSP addresses ?
rpingar, I disabled the pin code.
Maybe you should try this (I haven't a clue, but...)
Please pay attention to put it in WAP mode 1.2
hi all i have done bs and update my spv m500 to 1.13 i have been trying to get MMS to work on my UK Orange SPV M500 i look at the settings as described
The instructions read...
Setting up the MMS profile
Tap on Start and then Messaging.
Tap on Accounts and select MMS.
Tap on Tools and select MMS Settings...
Tap on the Connect via: drop down list and select
Tap on the Servers tab.
Tap on New.
In the Server name: field, enter
In the Gateway: field, enter
In the Port number: field, enter
In the Server address: field, enter
Tap on OK.
Tap on ok.
Tap on x to close the settings.
but i have no mms profile on my spv just seeing is there a cab file to sort this out or what is need to fix this problem thanks
Download and extract an ext rom from the ftp then install the mms cab file to your device then apply the settings for your provider.
hi thanks for your help so far as i am still new two all this would you be able to send me the link and some more info on how do set it all up thanks
You could use this Orange GPRS & MMS setup cab.
Copy it to your phone & run it & all the settings will be installed for you.
If your pay as you go you will need to make a slight tweek to the mms settings (remove the "C" from the server name)
Hope this is helps.
If Mister B's last post won't be of help to you, here's the link to the ftp's ext roms; ftp://ftp.xda-developers.com/Magician/Extended_Roms/. Download and extract the zip file. What you need is the cab file which part of its filename is MMS. You'll have to go to your provider's support home page for mms settings.
still no luck
hi thanks for all your help so far i have try Orange_UK_Contract_Magician.CAB still not luck it still not working
i try to have a look on the ftp://ftp.xda-developers.com/Magician/Extended_Roms/ but i get a error windows cannot access this folder make sure you typed file name correctly and that you have
premission to access the folder
so what the next best think to do thanks
This may sound stupid, but you need to log in to have access to the ftp. Maybe it is some setting in your browser. Try using an ftp program and use xda for the username and password.
Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!
You can download all the T-Mobile customisation cabs here inc the MMS settings:
Here
Hi
I've downloaded the T-Mobile UK Ext ROM & ran it but it hasn't changed anything.. any ideas?
from Modaco thread:
Network : T-Mobile
Country : UK
GPRS Connection :
Connects to : "The Internet"
Access Point : "general.t-mobile.uk"
User Name : "user"
Password : "wap"
Primary DNS : blank
Secondary DNS : blank
GPRS WAP Connection :
Connects to : "WAP Network"
Access Point : "general.t-mobile.uk"
IP : "149.254.001.010"
User Name : "user"
Password : "wap"
GPRS MMS Connection :
Access Point : "general.t-mobile.uk"
IP : "149.254.211.010"
User Name : "user"
Password : supplied on registration <==?????
MMSC : http://mmsc.t-mobile.co.uk
Out of interest did you have to CID unlock your phone or did it just let you upgrade the ROM?
gavinmoffitt said:
Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!
Click to expand...
Click to collapse
Don't know if tis is a stupid question, but could you use MMS before?
With my Vodafone (UK) contract I had to add MMS as a separate package.
I just used the settings on the T-Mobile website and it works perfectly.
There are 2 parts to setting up MMS:
1. Setting up the connection settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677
2. Configuring the Picture Messaging settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677
Got it sorted - tried the settings listed on MoDaCo, which didn't work... found a pdf on T-Mobile's website, with different settings & those worked...
Thanks to everyone who replied!
Could you please put the link in to the pdf in case someone else needs this? Thanks.
Hi
The PDF is in the T-Mobile users area & you need a valid number to access it. However the settings are:
Setting up your Picture Messaging profile
1. Select the Start menu and then Messages.
2. Select Messaging
3. Select Menu and Tools then select Options
4. Tap on MMS
5. Tap on the Servers tab.
6. Tap on New.
7. In the box Server name enter T-Mobile MMS
8. In the box Gateway enter 149.254.201.135
9. In the box Port number enter 8080
10. In the box Server address enter http://mmsc.t-mobile.co.uk:8002
11. Select the Connect via drop down list and select your internet profile (T-Mobile Internet or T-Mobile GPRS
(Web))
12. Select the WAP Version drop down list and select WAP 2.0
13. Select OK
14. With T-Mobile MMS highlighted, tap on Set As Default
15. Select ok
Hope this helps!
thank you!
Hi
I am having a WM6 on HTC 3400i. When I configure Activesync I get this error message 0x80072F17.
Also, doing the connection configuration, I am not able to provide the domain name (I have provided the server name). I understand the domain is provided automatically by the ISP.
Please help and provide a solution.
Thanks.
Pmsmob
Hello everybody
I'm having a bit of a problem here! The integrated SIP client of my i9505 is not working!
I have put the correct username, password and server address but when I try to make a call it is just cancelled!
When I enter the same data in CSipSimple everything works normally! (using CSipSimple's Basic configuration)
I just don't want to use additional software. where is the problem?
MGA Stock firmware
the only mod is that it is rooted.