Database Users

Server certificate is invalid

I am using a O2 XDAII (Singapore). Recently, I am having problem with my POP3 e-mail download. I have checked all my setting and password are correct, but the error message says " The server certificate is invalid"
Can anyone help me on how to resolve this problem? How to change the server certificate?
Thanks, LAW

SSL Error 0x80072f0d

I installed our company root CA on my windows mobile device. It said it was installed successfully. I set the username and password and domain. I selected SSL encryption. Set the server to the required IP address. I tried to sync my email and I get the following error:
"Result:
The security certificate on the server is not valid. Contact you Exchange Server administrator or ISP to install a valid certificate on the server" This is also referred to as support code "0x80072F0D"
I looked at the installed cert on my device and have the following details:
CERTIFICATE DETAILS (ROOT)
Issued to: **SNIP** (THIS IS AN IP ADDRESS)
Issued by: ** SNIP **
Valid from: 5/26/06 to 5/25/08
Intended Purpose(s): Server Authentication
Do you know what I am doing wrong?
Thank you very much in advance.

Any help
This problem is killing me! Is it possible that Softbank is blocking port 443? I seem to have read that somewhere last year. I have had this phone for almost 7 months and I still haven't got it to do what I purchased it for. aaah the ranting.. that felt good

Problem to log on a specific wifi network

Hi everybody! I've searched for a problem like mine here but I didn't find it, so I'm openning a new thread. I hope it's ok to do that!
I'm having some trouble trying to connect to the wifi network at the hospital I work. I tried to follow the intructions they gave, but these instructions are for desktop computers and notebooks and they have steps that I don't know how to follow in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
In case you just didn't understand the steps because of my poor english, here´s a link to them, but this link is for the windows vista configuration (I chose it because it is mainly in english and it has many screenshots, so I think all of you can understand it): http://www.uel.br/ati/suporte/pages/configuracao-wifi-uel/windows-vista-us.php
Any ideas of how I can solve this problem?
I'm runnig Dutty's Leo Holy Grail R0 rom, with WM6.5 and I can log on just fine in other networks.
Thanks in advance!!!

Hi,
just trying to help u.
in your case, maybe you need some sort of certificate like you stated above. Go ask your IT service/help desk on where you can get one.
Or maybe you need to register your device (WLAN Mac address or you need to use fix IP). For this, you also need to ask help from your IT service to register your device to their list, so that u can connect to their wifi network.
Not much help, but u can try them

Oh, thanks, I was going to do that anyway, but I though someone here could help me or indicate some wifi utility that could handle those steps to configure my network.
Well, thanks for your attention!

Moved as not software release...

Hey, I've got some news
I have some new facts to tell you guys and see if you can help me. First, I discovered that when I just ignore the warning that I get when I click on properties, I get another message saying that the server certificate is issued by an unknown autority and it couldn't be validated. Then I finally talked to the support staff at the hospital and they said that they don't use any certificates at all. No personal nor server certificates are needed. So I guess that the problem is with Windows Mobile, which is asking for certificates when they're not needed.
Is there any way to command WM to not ask for a certificate when logging on a particular network, because I believe this could be the solution for my problem!
Thanks in advance!!!

[Q] Exchange Sync Err

Hello Everyone,
Am unable to sync exchange with HD2 (energy rom) i recieve an err with the following code 0x85010001. However, nothing wrong with my corporate exchange server if used on other devices.
Please urgent help is required
Thanks in adv

You should check the following as being the most common reason not able to sync with exchange:
- date/time on your phone
- is the correct cert loaded on your phone
- can you connect to OWA using web browser

Re: Exchange Sync Err
Hi,
date n time are correct as per the place i live in
how do i check correct cert? and can u please let me know where to install it from?
yes i can access OWA using fone's browser
thnx, wud appreciate your help mate

You need to have a valid SSL certificate from your mail server. But this is only the case when your company doesn't have a purchased SSL certificate but a self generated one. So if this is the case your company admin can provide you with the certificate.

Stan has it...

[21 Feb 2011] [Q] Android Exchange Accnt Setup Error

I've read and searched and Googled but I can't find an answer
I recently flashed my first Android NAND ROM: "CMYLXGOroms.Stock.Desire.HD.v1.1.4.1n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.7OC_CWM.zip".
Everything went smoothly and it all looks good except I cannot complete the Exchange ActiveSync account.
DETAILS:
1. I'm hosting my own Exchange server -2003
2. My SSL cert is self-generated from my own MS Cert Authority
3. I can view my OWA account via the native web browser w/o issue
4. My settings "appear" to be fine as I can reach the very end of the setup wizard. (If I change any of the ActiveSync account settings to an invalid option - say add an extra character to the server address - I receive an error when I click on "Next")
ISSUE:
1. On the last step of the setup wizard, when I click on "Finish setup" I receive the error:
"Failed to created the account. Please try again later."
QUESTIONS/THOUGHTS:
1. How to you import a SSL Cert in Android?
2. I've read about "Accept All SSL Certificates" dialog box you can check but I don't see one during the setup wizard - only the "This server requires an encrypted SSL connection". Is this a legacy setting or something that is hidden by HTC's SenseHD or? Is there anyway to access this option?
3. I've tried both checking and un-checking the "This server requires an encrypted SSL connection" - both give me the same failed result.
OTHER TROUBLESHOOTING:
1. I know this works as I've been successfully using Activesync with WinMo 6.1 & 6.5 on my wife's TouchPro2 and this works fine w/ the stock WinMo 6.5. So it's not a bad config on the back-end.
2. I tried installing Touchdown to see if that would work and I cannot get that to work either.
I'm getting really frustrated - any help would be GREATLY appreciated!
thnx

UPDATE:
I spent all day:
1. Creating a new DNS A record to point directly to my OWA server
2. Upgrading my SSL cert to an offical third-part cert from startssl.com (great service for free BTW)
3. Figuring out how to export/import/modify that cert to be installed on Android
I now have a nice DNS record that points to my OWA server (vs. the old DynDNS pointer) and I appreciate the SSL cert for free find, but I'm still ready to loose it over the lack of ActiveSync support.
Anybody have any idea if this is potentially a ROM issue and I should try another? Or is this a Froyo issue and I should try Gingerbread?
TIA