Database Users

Bricked m600

ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.

never mind fixed itby goin into the bootloader

funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help

What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)

Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600

crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?

Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?

Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers

just change the usb port to another one and start rom it should pick it up

probleme flash

Hello,
can some one help me please.
I try to flash my touch cruise and at 99% his stop.
after i just have 3 color screen and can't flash.
I try hard reset but it still color screen.
in the screen i got :
POLA100
SPL-1.25.0000
CPLD-2

Which rom did you try to flash on your device? I would suggest to check out the threads that relate to that rom. If you have used Olipro's hard-spl and followed all the steps for flashing the rom, maybe you could ensure your device is fully charged,that the file you have downloaded (rom) is not corrupted and try flashing it again.

shinshazz said:
Hello,
SPL-1.25.0000
CPLD-2
Click to expand...
Click to collapse
You had to hard-spl your device first!!

I have use Hard-SPL-V2 and when it get at 99%, it stop and then i get the 3 colors screen.
the rom I want to flash is the bepe 0.56.
Is my phone is over or I can get it work again.
I alreasy try to flash with the original HTC rom also, but don't work.

shinshazz said:
I have use Hard-SPL-V2 and when it get at 99%, it stop and then i get the 3 colors screen.
the rom I want to flash is the bepe 0.56.
Is my phone is over or I can get it work again.
I alreasy try to flash with the original HTC rom also, but don't work.
Click to expand...
Click to collapse
Sorry, just to be clear. It only gets to 99% of the Hard SPL V2? So the problem is not the rom you tried to flash but the Hard Spl?

The Hard-SPL-V2 that i have try is by Olipro, and I follow all the instruction.
I don't know why he stop at 99%.
I ask SFR, and they can't do anythink.
I think it's over for my phone .
I will try to ask HTC if they can do something and how it will cost.
hope give you good news .

Flash Problem
Hello,
I have the same problem...do you already have solution for your case ?!?!
Thank you in advance !

Ignore this post - I had IE troubles and double posted - See next post

Just to be very very clear since you are talking of HardSPL and of bepes ROM and mix all up:
You did not apply HardSPL to your device!
A device which has HardSPL applied would read "Pola100 MFG, SPL-2.20.Olinex, CPLD-2" at the 3-color-screen. Your device is still with the original bootloader. I suggest you try applying the HardSPL V2 again until it works or you get bored. Exactly follow instructions given in this thread: http://forum.xda-developers.com/showthread.php?t=370434

Hello, i had the same problem, i just soft reset my device and flash it back, it went up to 100% without any problem

Not working
Hello,
On device when I just connect the usb cable I get the three colour display with info:
POLA100
SPL-1.25.0000
CPLD-2.
Then I follow the instrutions, but when I get the step 7 the device appears always on 0% and get always the error 262.
Do you know how to fix this?!?!?

mrtgds said:
Hello,
On device when I just connect the usb cable I get the three colour display with info:
POLA100
SPL-1.25.0000
CPLD-2.
Then I follow the instrutions, but when I get the step 7 the device appears always on 0% and get always the error 262.
Do you know how to fix this?!?!?
Click to expand...
Click to collapse
You did something wrong. You have still original spl!
The correct steps:
Download hard-spl.
Plug your pda to pc.
On Pc run RomUpdateUtiliy (from Hard-spl folder)
Now you will see on PDA a tricolor screen and will be asked replug your usb cable. DO IT.
After Few minutes pda will reboot, hard-spl is installed.
Download the rom.
Now, STEP MANUALLY to bootlader. (press and hold camera, and press reset)
You will see a tricolor screen with OLINEX on your pda.
On the pc run the RomUpdateUtiliy (from the downloaded rom folder)
After Few minutes pda will reboot, new rom is installed.

See the images attached please.
I never get the "Replug information".
It's strange that Image version doesn't appear...
Thank in advance !

Now you will see on PDA a tricolor screen and will be asked replug your usb cable. DO IT.
On your PDA screen !
Not on your computer screen.

For information for my Polaris.
I found a phone shop in Paris, the boss of the shop say he can do something and I wait if he could or not.
Hope he will get me good news.

See this thread..
http://forum.xda-developers.com/showthread.php?t=373725

[Fixed] Dead hd2 - help needed

NOW ITS FIXED. THANKS
Dear all,
after experimenting quite a few cooked rom, my hd2 stoped working all on a sudden. When i tried to switch it on it came only the white screen with green htc written on it. And it (white screen) stucked and used to stay on. I took the battery off and switched on again it remained same. Just before a while i tried again, now the white screen coming for a second and no more pulse. Please advice me.
Thanks in advance.
Zaman

connect your phone to your PC via ActiveSync/WMDC and run your stock ROM and see if that helps...even with no ROM on the phone Windows should still show connected

http://forum.xda-developers.com/showthread.php?t=609477
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*
Click to expand...
Click to collapse
If you get tri-colored screen you can flash any ROM that you want without ActiveSync ... one of the advantages of HSPL if you have one installed.

Thanks again,
its not the tricolour screen.
It doesn't connect with the pc through active sync. As i tried to go for another rom after it got stuck.
Really worried a bit.

Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks

Which ROM/radio are you using? If you've got HSPL installed it shouldn't be difficult to get it working again, you should just need to flash to a compatible ROM and radio.

[email protected] said:
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Click to expand...
Click to collapse
If you have HSPL and can see tri-color screen on display ... just plug in usb cable (that is connected to PC) in HD2 and start flashing process again the same way that you did before. I suggest you flash some of the official ROMs.

Thanks _x_
after having seen tricoloured screen i connected it with usb cable and flashed as normal. It did work for. And the phone is alive again.
Thanks to all of you for your attention and helps.
Cheers.

Glad I could help but it is "bepe" that you should thank to for HSPL
http://forum.xda-developers.com/showthread.php?t=611433

can you also change the thread title.. Add "Fixed"

my elf not turnd on at all

hello.. i dont know what happen 2 my elf was workin fine then its shut down by it self then no power up and when i put the usb or the charge it give`s me red light up 2 the screen
what shall i do?

did u do any new ROM flashing or what?

chathar said:
did u do any new ROM flashing or what?
Click to expand...
Click to collapse
nope didnt flash it since a month ago,, it was working fine till it shuted down

think about battery?

saurabh88 said:
think about battery?
Click to expand...
Click to collapse
i dont know,, it was ok 85% be4 the phone shutdown..even i did put the charge on its give me the red light without use or charger its give nothing no power on or anything at all

As far as i know, this red light usually appears when either internal or main battery are low.
if while charging the light remains on, try replacing your internal battery.
better is to get it checked up by some hardware professional.

ok lts take another look...
press and hold both green and red button and reset ur phone..
do u see three color screen?

saurabh88 said:
ok lts take another look...
press and hold both green and red button and reset ur phone..
do u see three color screen?
Click to expand...
Click to collapse
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed

crazylife said:
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed
Click to expand...
Click to collapse
Try to Reset your Device by Pressing Reset Button using stylus, keep holding down Camera Button. Do you see 3 color screen?

chathar said:
Try to Reset your Device by Pressing Reset Button using stylus, keep holding down Camera Button. Do you see 3 color screen?
Click to expand...
Click to collapse
nothing happening the screen is off its broke

crazylife said:
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed
Click to expand...
Click to collapse
crazylife said:
nothing happening the screen is off its broke
Click to expand...
Click to collapse
Well, screen can not break by itself. The Device must have fell down. You need to get it check by some technician.

same prob
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...

babai93 said:
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...
Click to expand...
Click to collapse
your problem is not same as mentioned on this thread. seems like you have flashed some incompatible ROM. can u mention which ROM you flashed, or try contacting the ROM cook for advise.

babai93 said:
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...
Click to expand...
Click to collapse
tell us here what u have done?
hspl?
which rom?
power lost or not?

Tried to flash with won coocked extrom
I tried to make a won ROM. just added a ExtRom and make a nbh and flashed. while I Updateing its gives error and finaly fleshed and shown success msg. but after fleshing its not booting.
plz give ur mobile number. I want to talk.

babai93 said:
I tried to make a won ROM. just added a ExtRom and make a nbh and flashed. while I Updateing its gives error and finaly fleshed and shown success msg. but after fleshing its not booting.
plz give ur mobile number. I want to talk.
Click to expand...
Click to collapse
Well your problem is related to cooking a ROM, you need to keep in consideration that while cooking a ROM you can have total of 535 packages and sizer below 20MB.
Try removing external packages one by one and cooking a rom..

chathar said:
Well your problem is related to cooking a ROM, you need to keep in consideration that while cooking a ROM you can have total of 535 packages and sizer below 20MB.
Try removing external packages one by one and cooking a rom..
Click to expand...
Click to collapse
extrom by his meand he had included original spl and ipl while cooking..

It mite be coz u mite have flashed wid rom which was nt meant for yr device it happend to me once...take it to yr service centre

sadly,my T01A become a brick as well....

I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?

bird_9527 said:
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
Click to expand...
Click to collapse
Mmmm, did you try to flash a rom by pin recovery method?

arag0n85 said:
Mmmm, did you try to flash a rom by pin recovery method?
Click to expand...
Click to collapse
yep，I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...

bird_9527 said:
I push out the microSD,and short the pin 1 and 3
Click to expand...
Click to collapse
You should NOT remove micro SD...
You need to put your official Rom on the micro SD and then short the pins...

bird_9527 said:
yep,I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
Click to expand...
Click to collapse
Did you try with a diferent ROM?

right
arag0n85 said:
Did you try with a diferent ROM?
Click to expand...
Click to collapse
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....

bird_9527 said:
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
Click to expand...
Click to collapse
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.

arag0n85 said:
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
Click to expand...
Click to collapse
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.

yep
minhanh_tran said:
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
Click to expand...
Click to collapse
my t01a just like as your condition......waiting for the solution tools......

congraturation!