hello.. i dont know what happen 2 my elf was workin fine then its shut down by it self then no power up and when i put the usb or the charge it give`s me red light up 2 the screen
what shall i do?
did u do any new ROM flashing or what?
chathar said:
did u do any new ROM flashing or what?
Click to expand...
Click to collapse
nope didnt flash it since a month ago,, it was working fine till it shuted down
think about battery?
saurabh88 said:
think about battery?
Click to expand...
Click to collapse
i dont know,, it was ok 85% be4 the phone shutdown..even i did put the charge on its give me the red light without use or charger its give nothing no power on or anything at all
As far as i know, this red light usually appears when either internal or main battery are low.
if while charging the light remains on, try replacing your internal battery.
better is to get it checked up by some hardware professional.
ok lts take another look...
press and hold both green and red button and reset ur phone..
do u see three color screen?
saurabh88 said:
ok lts take another look...
press and hold both green and red button and reset ur phone..
do u see three color screen?
Click to expand...
Click to collapse
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed
crazylife said:
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed
Click to expand...
Click to collapse
Try to Reset your Device by Pressing Reset Button using stylus, keep holding down Camera Button. Do you see 3 color screen?
chathar said:
Try to Reset your Device by Pressing Reset Button using stylus, keep holding down Camera Button. Do you see 3 color screen?
Click to expand...
Click to collapse
nothing happening the screen is off its broke
crazylife said:
i did open the mobile seems the screen is off,, alot of black lines on it it must be changed
Click to expand...
Click to collapse
crazylife said:
nothing happening the screen is off its broke
Click to expand...
Click to collapse
Well, screen can not break by itself. The Device must have fell down. You need to get it check by some technician.
same prob
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...
babai93 said:
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...
Click to expand...
Click to collapse
your problem is not same as mentioned on this thread. seems like you have flashed some incompatible ROM. can u mention which ROM you flashed, or try contacting the ROM cook for advise.
babai93 said:
I have the same problem, while I trying to flesh the device with a new ROM, after success message in PC, my device is not booting. Even the Lights/Indicators are also not glowing.
Please suggest...
Click to expand...
Click to collapse
tell us here what u have done?
hspl?
which rom?
power lost or not?
Tried to flash with won coocked extrom
I tried to make a won ROM. just added a ExtRom and make a nbh and flashed. while I Updateing its gives error and finaly fleshed and shown success msg. but after fleshing its not booting.
plz give ur mobile number. I want to talk.
babai93 said:
I tried to make a won ROM. just added a ExtRom and make a nbh and flashed. while I Updateing its gives error and finaly fleshed and shown success msg. but after fleshing its not booting.
plz give ur mobile number. I want to talk.
Click to expand...
Click to collapse
Well your problem is related to cooking a ROM, you need to keep in consideration that while cooking a ROM you can have total of 535 packages and sizer below 20MB.
Try removing external packages one by one and cooking a rom..
chathar said:
Well your problem is related to cooking a ROM, you need to keep in consideration that while cooking a ROM you can have total of 535 packages and sizer below 20MB.
Try removing external packages one by one and cooking a rom..
Click to expand...
Click to collapse
extrom by his meand he had included original spl and ipl while cooking..
It mite be coz u mite have flashed wid rom which was nt meant for yr device it happend to me once...take it to yr service centre
Related
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
Hello guys,
First of all I'm sorry for creating separated thread with problems, but i want to post them clearly and in one place. I hope that you can help with this, cause I'm trying and trying with many many ways, and nothing works for me . So lets start:
I have succesfully installed Windows XP on my machine. It works perfect.
But there are some problems ofcourse
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
I've tried the comonex way many many times with no success. There is only black screen all the time.
And now: I've tried it today again, and when I'm starting mtty, there is no USB anymore.
I've done it before, so please, don't tell me, that I'm not following the instructions .
I don't know what to do. Because of that - there is no sound in Windows, and anyway i need SnapVue side to run some 3G modem .
Now the OS side:
Wlan won't work. When I'm trying to install the driver it says: "Error 10, device can't start" or something like this.
I've tried all the solutions provided here without success. What should i do, and what I'm doing wrong?
Thanks.
Cheers,
Chris
SnapVue Side
Did you Hard reseted your snap vue ?
tryed to install HardSPL ?
What about taking out the battery and replug it (dont fire os only snapvue)
Is it working then ?
greets
kristoff_sz said:
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
Click to expand...
Click to collapse
Hello, for this.. I will keep on cmonex things.
First : are you able to use ECShift.exe ? if yes... try "ECShift.exe -gm" (without quotes) to see if it works (first) and what is the value (0 or 1). If it is 1, you are in the bootloader and need to go out of this using "ECShift.exe -mode0" and then soft-reset snapvue with "ECShift.exe -reset".
You might say that you already do that... maybe yeah. but you need to see exactly why it is black, is it black because of stopping to display, or because it enters bootloaders.... etc..
Second : if you get access to WM, go to the snapvue settings button (if you still have the snapvue today plugin) and go to power -> advanced .. there you should uncheck both if they are checked.. just to try that the issue does not come from there.
Hope it will be better for snapvue side. I let you answer that, and I will see later for the following issues.
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
kristoff_sz said:
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
Click to expand...
Click to collapse
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
koala996 said:
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
Click to expand...
Click to collapse
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
kristoff_sz said:
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
Click to expand...
Click to collapse
mmh.. I'm no help for that.. sorry
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Neutron83 said:
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Click to expand...
Click to collapse
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
kristoff_sz said:
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
Click to expand...
Click to collapse
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
koala996 said:
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
Click to expand...
Click to collapse
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
kristoff_sz said:
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
Click to expand...
Click to collapse
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
koala996 said:
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
Click to expand...
Click to collapse
Thanks.
Ok, new update: I've managed to flash that rom, but again - black screen always But there is one more thing:
I've run SnapVue (as I stated before - when there is "Battery low, device will turn off in...), and then started Windows - well, i had sound for a second, and I could change between XP and SV, but in a second - black screen again and under XP this message:
You just plugged device into audio jack.
And nothing. Sound is dead and SV side is dead... damn.
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
cmonex said:
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
Click to expand...
Click to collapse
Thank you for suggestion.
I've done as you stated... but nothing changes. At normal boot (after taking out battery), WInMo side wont work.
Any news in that thread anyone?
Did you check the WM power settings?
Did you check that the WM Advanced Power Settings was not switching the WM side off? Read my last post at http://forum.xda-developers.com/showthread.php?t=440437
You will need to use the Vista reset SnapVUE utility first to start it up first
*EDIT* Just re-read your first post and saw that you are running XP, oh well - if you can quickly start SnapVUE then check your power settings. Good Luck!
hi to all
my Hd2 is dead today for no reason . i try to put the cellphone into boot mode or hard reset or soft reset but no success. with usb cable plug nothing happened.
my battery is fully charged . the cellphone is brand new and used for only 2 weeks . i have try with power supply to power on and the result is same.
please help me to solve this problem . i am confused .
thank you in advance !
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
samsamuel said:
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
Click to expand...
Click to collapse
you sound scarier than sherlock holmes
hehe, secret service interrogation trained.
samsamuel said:
cmon, give us at least a bit of help.
model? stock rom? flashed anything? if so what?(exact file name please.)
you use the term "cellphone", you american? is it a tmous? did you flash a non tmous radio? non tmous stock rom?
Click to expand...
Click to collapse
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
dezmelody said:
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
Click to expand...
Click to collapse
what were you doing when it went dead?
Trying to flash a ROM or a radio?
Take the battery out and make sure the connectors are not bent (esp. the middle one).
dezmelody said:
hi again
thanks for your attention
as i mentioned above the model is HTC HD2. unfortunately the cellphone is dead now and i dont know any of those information.
py problem now is that i couldn't put the phone on boot loader or hard reset.
nothing occure at all.
help me for alternative flash mode .
Click to expand...
Click to collapse
lol, still no hard facts,,,, by model i meant is it a tmous(green send key, red end key, says t mobile under earpiece) or a regular hd2(all keys white)?
what's the last thing you did? did you flash something? (full filename please)
it rather sounds like you have a tmous and have flashed the wrong radio and bricked it, but without any facts thats just a wild guess. that or bent battery pin.
samsamuel said:
lol, still no hard facts,,,, by model i meant is it a tmous(green send key, red end key, says t mobile under earpiece) or a regular hd2(all keys white)?
what's the last thing you did? did you flash something? (full filename please)
it rather sounds like you have a tmous and have flashed the wrong radio and bricked it, but without any facts thats just a wild guess. that or bent battery pin.
Click to expand...
Click to collapse
my phone is regular with no contract.
i have used as common , playing music and recieve a bluetooth file and suddenly phone dies.
i wanna to flash but no sucess with anything . in the other hand i cant even put the phone on boot loader mode at all.
now i want to go into boot loader to flash my phone.
dezmelody said:
my phone is regular with no contract.
i have used as common , playing music and recieve a bluetooth file and suddenly phone dies.
i wanna to flash but no sucess with anything . in the other hand i cant even put the phone on boot loader mode at all.
now i want to go into boot loader to flash my phone.
Click to expand...
Click to collapse
Are you putting the phone on charge when you attempt to load it into the bootloader?
How are you attempting to get it to the bootloader?
nrfitchett4 said:
what were you doing when it went dead?
Trying to flash a ROM or a radio?
Take the battery out and make sure the connectors are not bent (esp. the middle one).
Click to expand...
Click to collapse
not at all. just did common work .
im sure about battery oin and connection because i have tested with power supply either.
rp-x1 said:
Are you putting the phone on charge when you attempt to load it into the bootloader?
How are you attempting to get it to the bootloader?
Click to expand...
Click to collapse
battery is fully cahrged and yes , try to connect charger .
volume down + power
volume down + volume up + power
is it correct ?
dezmelody said:
battery is fully cahrged and yes , try to connect charger .
volume down + power
volume down + volume up + power
is it correct ?
Click to expand...
Click to collapse
HOLD volume down + TAP AND RELEASE power = bootloader (do it with battery cover off)
HOLD volume down + HOLD volume up + TAP AND RELEASE power = Hard Reset
samsamuel said:
HOLD volume down + TAP AND RELEASE power = bootloader (do it with battery cover off)
HOLD volume down + HOLD volume up + TAP AND RELEASE power = Hard Reset
Click to expand...
Click to collapse
nothing happened with none of this methods.
phone still dead and lcd remain black .
can i use another method for flash phone . i mean direct flash or something ?
dezmelody said:
my phone is regular with no contract.
Click to expand...
Click to collapse
Still no model/last rom flashed info....
Please answer yes or no, , , is the 'send' key green?
samsamuel said:
Still no model/last rom flashed info....
Please answer yes or no, , , is the 'send' key green?
Click to expand...
Click to collapse
YES , it is
Thank you.
That means then that you have a tmous phone, and it sounds like you have flashed an incompatible radio, which has killed (no fix) your phone. However, we cant be 100% sure of that till you give us teh full name of teh last rom/radio you flashed.
(had you answered that in post 8, you would have had 4 hours to cry by now, and would be feeling slightly better, sadly i fear the despair is yet to hit )
Non-compatible Radio on TMOUS phone. Killed it for sure. My condolences. Not even the warranty can save your phone...
otacon said:
Not even the warranty can save your phone...
Click to expand...
Click to collapse
actually several people have sent them back no problem. The phone wont start, so they cant prove hspl.
Just shows how dead it is, hehe
samsamuel said:
Thank you.
That means then that you have a tmous phone, and it sounds like you have flashed an incompatible radio, which has killed (no fix) your phone. However, we cant be 100% sure of that till you give us teh full name of teh last rom/radio you flashed.
(had you answered that in post 8, you would have had 4 hours to cry by now, and would be feeling slightly better, sadly i fear the despair is yet to hit )
Click to expand...
Click to collapse
otacon said:
Non-compatible Radio on TMOUS phone. Killed it for sure. My condolences. Not even the warranty can save your phone...
Click to expand...
Click to collapse
samsamuel said:
actually several people have sent them back no problem. The phone wont start, so they cant prove hspl.
Just shows how dead it is, hehe
Click to expand...
Click to collapse
hey guys as i told you before this phone is brand new and i used as common.
did not flash , nor hard reset. just after a while suddenly phone dead.
now i want to flash it with proper rom file and back it live. can i ?
The problem is you can't even get the phone to start... Send it back for warranty. That's your best (and only) option for this moment...
hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.
Hello folks.
Yesterday I played some games on my phone and after about 1 hour the phone just blocked . Didn't know what to do , nothing worked so I've unpluged the battery.
After that I've tryied to open it but there was something strange. There was a white screen , and just this...
I've tryied some things and now , when I open my phone it goes to bootloader ( that thing with red,green,blue and white ) , It doesn't even boot...
Sorry for my english , hope you can help me to fix it or just to tell me if it's brick or not ...
Did you try to open the device? Why?
If you phone go in bootloader check the Volume Down button, probably is blocked. Sometime happen the 2 buttons of the volume go out of they position and is tricky to put it back again. If the buttons do not do click when you push it that mean they are stuck, maybe just one of them.
I can be absolutely sure there is not any button stucked.
MikeyRo said:
I can be absolutely sure there is not any button stucked.
Click to expand...
Click to collapse
Somehow the phone boot in bootloader. The only way to do that is pushing the volume down. To me seems like hardware and not software problem.
I just don't understand, did you opened the Phone? and if yes for what reason?
My bad , didn't opened it , just powered on ( pressed the red button ).
MikeyRo said:
My bad , didn't opened it , just powered on ( pressed the red button ).
Click to expand...
Click to collapse
Are you an Android? If yes then you should boot into MAGLDR, reboot you phone and keep pressing power button. What happen?
boot into that screen with many colors
MikeyRo said:
boot into that screen with many colors
Click to expand...
Click to collapse
Ok so you are in bootloader, from there did you used Task29?
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
MikeyRo said:
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
Click to expand...
Click to collapse
I think probably the HD2 is completely dead but I don't understand why the hell your PC is restarting and get you an error. Do you have some kind of virus? Try close Firewall and Antivirus and perform Task29 again. If this will not work from bootloader try to install directly MAGLRD 1.13.07, maybe the MAGLRD will install because you have some problem with Task29. If both of this application give you the same error this is maybe related to your PC. I never saw this problem like on another thread with Security Unlocked. Let me know what happen.
Again my bad , my phone restarts, not pc. Can you give me any ID so maybe you can help me with team viewer?
MikeyRo said:
Again my bad , my phone restarts, not pc. Can you give me any ID so maybe you can help me with team viewer?
Click to expand...
Click to collapse
Even if I connect to your PC via Team this will not help because I don't have the phone in my hands. Ok, then is your phone to give you an error and reboots, try to install from Bootlader the MAGLRD and tell me what happen.
MAGLRD
The file.
Check the attachements. This happens when i run it.
MikeyRo said:
Check the attachements. This happens when i run it.
Click to expand...
Click to collapse
Reboot your PC then try MAGLRD again.
Same thing
MikeyRo said:
Same thing
Click to expand...
Click to collapse
I don't know buy I think something wrong there, or your phone just died and there is no way to let it work or is your PC, there is no other issues.
Try this: http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Start from first step by installing HSPL4 2.08 by Cotulla.
Check also for Virus or Antivirus which will compromise the installation or the files.
It goes to 100% and then restart my phone . I'll use another PC tomorrow so let's hope it will work just fine.
MikeyRo said:
So first of all my phone blocked while playing a game. After that i've removed the battery , wait 2 seconds , put it back and power on the phone . After that it should show me android loading , but it didn't . There was just a white screen, I could do nothing .
Cause of this i've tryied the Task29 and yes I've tryied it from bootloader . But the problem is, at 100% my pc restart everytime and on pc it says "ERROR [270] 'The image file is corrupted'."
Click to expand...
Click to collapse
Were you playing/doing something heavy? Was the phone (very) hot when it froze? No longer boots?
Typical symptoms of infamous overheating problem, sorry for the bad news. Try following this post and report back : http://forum.xda-developers.com/showpost.php?p=23638873&postcount=3
Edit: @eclyptos everything's great, thanks. I've been away from the forum, there hasn't been much going on in the HD2 section. Now I come here every few weeks
MikeyRo said:
It goes to 100% and then restart my phone . I'll use another PC tomorrow so let's hope it will work just fine.
Click to expand...
Click to collapse
Yes, good idea. Let me know how it goes with different PC. EDIT: No errors this time flashing HSPL4?
Marvlesz said:
Were you playing/doing something heavy? Was the phone (very) hot when it froze? No longer boots?
Typical symptoms of infamous overheating problem, sorry for the bad news. Try following this post and report back : http://forum.xda-developers.com/showpost.php?p=23638873&postcount=3
Click to expand...
Click to collapse
Hey Marvlesz, long time my Man, How you doing?
You are right, this can be the reason why he can't boot anymore. If so will be very difficult time to revive the HD2 even if the solution are there.