Hello guys,
First of all I'm sorry for creating separated thread with problems, but i want to post them clearly and in one place. I hope that you can help with this, cause I'm trying and trying with many many ways, and nothing works for me . So lets start:
I have succesfully installed Windows XP on my machine. It works perfect.
But there are some problems ofcourse
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
I've tried the comonex way many many times with no success. There is only black screen all the time.
And now: I've tried it today again, and when I'm starting mtty, there is no USB anymore.
I've done it before, so please, don't tell me, that I'm not following the instructions .
I don't know what to do. Because of that - there is no sound in Windows, and anyway i need SnapVue side to run some 3G modem .
Now the OS side:
Wlan won't work. When I'm trying to install the driver it says: "Error 10, device can't start" or something like this.
I've tried all the solutions provided here without success. What should i do, and what I'm doing wrong?
Thanks.
Cheers,
Chris
SnapVue Side
Did you Hard reseted your snap vue ?
tryed to install HardSPL ?
What about taking out the battery and replug it (dont fire os only snapvue)
Is it working then ?
greets
kristoff_sz said:
First of all, the snapvue (I've installed liberated ROM) won't run. Nothing works. There is only black screen and 3G led is blinking. The only way I can run snapvue is to drain battery to 0%, and then plug the adaptor and wait a second. And the only time, that snapcue is starting - its when bios saying that i have 2% battery and it will close in... etc etc. Anyway, for some reason its hanging up after a while. So again - its not working.
Click to expand...
Click to collapse
Hello, for this.. I will keep on cmonex things.
First : are you able to use ECShift.exe ? if yes... try "ECShift.exe -gm" (without quotes) to see if it works (first) and what is the value (0 or 1). If it is 1, you are in the bootloader and need to go out of this using "ECShift.exe -mode0" and then soft-reset snapvue with "ECShift.exe -reset".
You might say that you already do that... maybe yeah. but you need to see exactly why it is black, is it black because of stopping to display, or because it enters bootloaders.... etc..
Second : if you get access to WM, go to the snapvue settings button (if you still have the snapvue today plugin) and go to power -> advanced .. there you should uncheck both if they are checked.. just to try that the issue does not come from there.
Hope it will be better for snapvue side. I let you answer that, and I will see later for the following issues.
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
kristoff_sz said:
I've tested -gm already before and it shows good vaules. But when I'm trying to go to SnapVue Side - there is nothing. Only black screen.
One more thing:
I have HardSPL already,
I've flashed liberated ROM, Flashed gullums ROM, and no go.
Click to expand...
Click to collapse
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
koala996 said:
well "good" values does not mean anything to me... I guess you mean "0" all the time (because you don't need to go in the bootloader).
and what do you see if you type use the -reset command (with snapvue in mode0) in snapvue? Do you see the HTC screen? (white) or nothing at all.. always black?
Click to expand...
Click to collapse
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
kristoff_sz said:
Good values means:
When i type -bl, then -gm it shows mode 1,
-mode0 then -gm - shows mode 0...
After reset its always black.
Now I cant run it even on this warning screen
Only 3G icon is blinking. Rest is black like ***hole
Click to expand...
Click to collapse
mmh.. I'm no help for that.. sorry
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Neutron83 said:
okay you see the 3G icon flickering,
What kind of shift you have x9500 ? x9000 ? x9510 ? as you described when battery is low the full screen is visible, you tried things like realVGA ? what version of hardspl you installed ??
Greets
Click to expand...
Click to collapse
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
kristoff_sz said:
Hello,
All i can find is "Clio110"
I didnt try anything like this. I can flash new ROM sometimes, but it just give nothing.
The HardSPL is latest one... (first one I've flashed anyway )
Click to expand...
Click to collapse
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
koala996 said:
clio110 stands for X9500.
you should try a tool in vista which display the WM part... I don't remember the name but I know that there exists at least one. I wish I remember that... grr.. was using it before my touch left me. and this utility allows to have a mouse in WinMob which is pretty nice ^^ (but useless IMO).
I will try to ask cmonex about your issue, but it seems that something is wrong.. but why? "hum"... you should try to flash cmonex's (rom and see what happens... his roms are the most secured and less modified and if it does not work with his rom, then it is coming from something else which might be harder to solve.
Click to expand...
Click to collapse
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
kristoff_sz said:
Can I ask you to provide link to ROM again? This one is cutted out .
Thank you for your help!
Click to expand...
Click to collapse
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
koala996 said:
oups sorry here is the rom .. I have copied the link in shorter form instead of the real link sorry
Click to expand...
Click to collapse
Thanks.
Ok, new update: I've managed to flash that rom, but again - black screen always But there is one more thing:
I've run SnapVue (as I stated before - when there is "Battery low, device will turn off in...), and then started Windows - well, i had sound for a second, and I could change between XP and SV, but in a second - black screen again and under XP this message:
You just plugged device into audio jack.
And nothing. Sound is dead and SV side is dead... damn.
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
cmonex said:
try flashing stock 1.30.405 then... I posted that somewhere (do a search for my posts in shift forum)
Click to expand...
Click to collapse
Thank you for suggestion.
I've done as you stated... but nothing changes. At normal boot (after taking out battery), WInMo side wont work.
Any news in that thread anyone?
Did you check the WM power settings?
Did you check that the WM Advanced Power Settings was not switching the WM side off? Read my last post at http://forum.xda-developers.com/showthread.php?t=440437
You will need to use the Vista reset SnapVUE utility first to start it up first
*EDIT* Just re-read your first post and saw that you are running XP, oh well - if you can quickly start SnapVUE then check your power settings. Good Luck!
Related
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Me
Olipro said:
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Click to expand...
Click to collapse
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Can't flash SPL, Polaris FRA ROM; was bricked...solved,can't flash
Hi Olipro,
last week-end I tried flashing hard SPL v2 on my French Polaris, before planning to flash the new radio 1.64, then bepe's 0.66 ROM.
I spent the first part of Saturday night trying numerous times, recovering, taking battery away, and trying agin - never worked. Then I tried flashing the 1.64 radio, it went up to 99%, then stopped, error message: from then on my Polaris went to boot-loader only, after soft reset or even hard resets. Until dawn I tried to fix this (I'm not a developper, I'm a power user travelling 4 days a week by plane accross Europe). Couldn't fix it.
On Sunday I called a friend of mine who imports HTC and sells the channel: I gave him my Polaris and he took it with him to fix it. Result was very surprising: I had given him your hard SPL v2, and a few nice ROM's from this site, specailly bepe's, as well as all the radio versions listed here for POlaris; well none of all that worked with him, and he could only reflash the official ROM and radio, and return it back to me...(which was very kind as it took him some time).
BUT, overall I'm very frustrated as I'm an early adopter, and I would so much like to try cooked ROM's on this fabulous device.
What do you think I should do? Any idea?
Is there a way to guide me though a custom process or is there a real issue on ALL French ROM's out there? (can't believe that).
Your inputs would really be appreciated.
Thx many, HangLoose.
23:45 > it finally worked !! (I must have been doing something wrong previously, sorry for bothering Olipro).
And thx for enabling us to use best in class cooked ROM's from this site.
I'll be loading bepe 0.67 just now. !!
Regards, HangLoose59
My cruiser not leaving the screen tricolor
My cruiser not leaving the screen tricolor, Tried to replace the original language (Spanish) by the English and upgrade stopped in 14%, dai then not leaving the screen tricolor.
Some hint.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
v1zca1n0 said:
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
Click to expand...
Click to collapse
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Diagorn said:
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Click to expand...
Click to collapse
Hard reset the device and it can take u out of bootloaer mode. To hard reset:
GPS/MESSAGING and INTERNET EXPLORER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
2. Release the RESET button, but continue pressing the GPS/MESSAGING and INTERNET EXPLORER buttons until you see a message on the screen
Release the buttons, and then press SEND on your device to perform the hard reset, or press any other button to cancel the reset.
Hello thanks for your help but I have already tried this
Diagorn said:
Hello thanks for your help but I have already tried this
Click to expand...
Click to collapse
Try with this program do a Hard SPL and tell me how gone
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Olipro said:
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Click to expand...
Click to collapse
You are rigth Olipro as always, but I left because I have the experience of used badly and block the PDA until I use again and unblock the machine. Maybe the diferent chip make a kind of bug than only can be fixed with Elf Hard SPL I don´t know but with me works. Let see if is the same with Diagorn
could be a side-effect, but the file should be blocked from flashing anyway.
i have the problem too. waiting for the solusion
Olipro said:
could be a side-effect, but the file should be blocked from flashing anyway.
Click to expand...
Click to collapse
Curiously Elf SPL unblock the flash and I don´t know why Anyway I stopped flashing anymore because I don´t want have the same problem again. Only I explain what happend to anyone that can have the same problem and attach the Elf Hard SPL if they want use and probe
BT Problem
The BT LED styed ON and after hardware reset (removing the battery, the reset button wasn't working) only the bootloader screen. It revived after I flashed the Radio ROM. And what bugs me is that BT button remains ON in TouchCommander, but NO BT. any ideas???
BT Problem
After synchronising with the PC i noticed the BT LED goes OFF ...
BTW
HardSPLv2.2
ROM 1.28Aserg.1WWE
RADIO 1.64.08.21
Cruise stuck in 3-color screen
Hi,
My Cruise just frooze, during GPRS synch with Exchange server. Soft reset and hard reset do not work anymore. If I take out the battery, and then switch on the device it stops in the 3-color screen. BT light stays on.
I have not made any changes to my Cruise, only added a 8 Gb SD card.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
me too...somebody help !!! sorry my english
Strangely enough it works!!!
v1zca1n0 said:
Try with this program do a Hard SPL and tell me how gone
Click to expand...
Click to collapse
I was really frightened when my TC got stuck in Tri-Colour screen. MY Polaris came to standstill, trapped in.
Over and over ROMUpdateUtility.exe shows ERROR [262 or 284]: UPDATE ERROR while trying update.
And only this strange RUU gave me other ERROR [296]: UPGRADE ONLY that helped me to quite out the three-color screen and installed new radio successfully.
I bought a second hand X7500.
I feel sheepy , I tried follow instruction (even for nobes like me) but I can't flash anything.
I got athena x7500, It was cid lock so i tried to unlocked it ,getting no connection error...then I found out I forgot to do kaizer hardspl....and then got error 244 ....
because I complete ignorant I done hard reset and format the micro drive....
and cannot flash any new os ....
please help me
additional info
Can get into bootloader (tri color screen) ,cannot recover old os. (black screen)
ipl-v.1.00
spl-v.1.2.oripro
battary status
p.s. forgive me english its not my native language
I managed to flash it yesterday. I had the same problem as you. It seems that u have succeeded to unlock your athena. The black screen also appeared on my athena, so i was worried that i bricked it. But then i found out it is quite normal, if your have followed the 3 steps olipro SPL. If I am not wrong, the black screen appeared in step 2. so now you flash with a wm 6, then restart from the begining the 3 steps olipro SPL. you can download the wm 6 from here. good luck.
http://forum.xda-developers.com/showthread.php?t=334512
by the way, i am completely disappointed with Athena. It is working extremely slow and it cannot play any videos. So it is a waste of money. I never expected such a poor pda from HTC.
doesn't work
wow, really? Make sure you've read as much as you can about flashing issues before you trash the hardware. It took me 8 different ROMs including 4 temporary bricks before I found the configuration that rocks this thing. My video is smooth (all formats) my camera is far better than my tilts, especially in lower light settings, and with real VGA set to 128, this screen is unmatched. Garmin gets me anywhere and I have no speed problems at all. Don't give up, people.
ouch
I gave up ((
adleron said:
I gave up ((
Click to expand...
Click to collapse
get an spl 1.2 rom from here
http://forum.xda-developers.com/showthread.php?t=397518
put your athena into the bootloader screen and connect to your computer
run the upgrade on your computer
do a hard reset , then things should be fine
you can't boot because there is no image on the athena
Almost it is always possible to recover fron the bootloader screen.
nb file
I have 2 nb files as backup,will it help?
adleron said:
I have 2 nb files as backup,will it help?
Click to expand...
Click to collapse
best to start afresh with one of the packages in the link I referenced.
havn't solve
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen
adleron said:
I don't know what is my battery status,
cannot succeed flashing anything, Just get the progrees uploading then black screen.
TNX
Ronen
Click to expand...
Click to collapse
The phone should charge via usb cable , if not try a different cable.
Once the phone is charged (light shows green around the joystick nipple) another option is to flash via SD card
There is a guide to do this in the wiki
hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone
"flash type 0 power reason 1 bootup_w_pwr_key_pressed"
That's the only thing written on my htc hd mini screen now.
After rebooting in "4-colored-screen mode" and flashing original rom (DAN) up to 100% device reboots and same thing happens, but with a little change - "flash type 0 power reason 6 bootup_w_warm_reset". Last flashed working rom was android "sense", it started "freezing", after soft-reseting the device i saw this grey screen. Already tried flashing different roms, taking the battery out for a long period, booting with vol+\vol- buttons pressed. Task29 freezes at 0%. Nothing helped.
Any advice anybody?
PS: sorry for my cr*ppy English, hope everything written above is available for understanding.
Please some pictures or more informations about ROMs you used,
iPlasm said:
Please some pictures or more informations about ROMs you used,
Click to expand...
Click to collapse
at first, it was RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe (original unmodified ROM, downloaded from shipped-roms)
then i switched to Gabanna's 21686, but it had some issues with gps in my case, so i went back to RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe and decided to switch to Android - HTC Sense 3.5 Android 2.3.5 with Beats Audio. It worked fine for 2 days, even gps came back from dead.
Thank you, hope this will help solving my case.
I think you better post some pictures here...., what you said now it seem OK
iPlasm said:
I think you better post some pictures here...., what you said now it seem OK
Click to expand...
Click to collapse
umm... pictures of WHAT?
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
iPlasm said:
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
Click to expand...
Click to collapse
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
2bigfella said:
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
Click to expand...
Click to collapse
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
iPlasm said:
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
Click to expand...
Click to collapse
I've searched for another battery in local stores - no success. The price of new, brought from ebay etc. would be equal to price of used HD Mini, and i don't want to waste money on buying some low-class-chinese-piece-of-cr%p battery, politely called "replica".
Could you, please, rephrase that "plug-usb-to-computer-on-it", because i can't understand what you mean.
Wrong, last working ROM (before the problem started) was HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
iPlasm said:
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
Click to expand...
Click to collapse
aaaaaand again (3rd time): last rom working on my phone was (before the problem started) HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
googled cwm recovery - 1. htc hd mini isn't supported and 2.MY PHONE ISN'T WORKING! I can't install apps on it because the only two things i can see on it is a)grey screen, described above and b)bootloader (4-colored-screen mode)
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
iPlasm said:
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
Click to expand...
Click to collapse
could you please post a link for cwm?
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
iPlasm said:
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
Click to expand...
Click to collapse
didn't work... :crying: "waiting for device" and nothing happens
have you installed the abd driver to pc before install the cwm recovery ?
arliuivps said:
have you installed the abd driver to pc before install the cwm recovery ?
Click to expand...
Click to collapse
sure i did
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
iPlasm said:
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
Click to expand...
Click to collapse
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
vitvichy said:
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
Click to expand...
Click to collapse
-----
Problem solved.
I cleaned memory, did like schlund said in post#2 and #6 http://forum.xda-developers.com/showthread.php?t=1852522&highlight=task+29 and flashed WM from official site.