Hi,
I just reset my phone. For some reasons, I got a problem during setup wizard. I want to run adb to fix the problem but I can't go to Setttings to turn on "USB Debugging".
Could you tell me how to make adb see my phone without turning one "USB debugging" mode?
Thanks!
i would also be interested run ADB on mac environment..
tisungho said:
Hi,
I just reset my phone. For some reasons, I got a problem during setup wizard. I want to run adb to fix the problem but I can't go to Setttings to turn on "USB Debugging".
Could you tell me how to make adb see my phone without turning one "USB debugging" mode?
Thanks!
Click to expand...
Click to collapse
What phone are you using , if its the G1 the re_boot the phone while holding down the menu button , keep holding it till it gets to the home screen , ( don't worry this will bypass the setup screen )where it will say safe mode then you can go to settings ...
Same!
I am currently having the same problem with my G1. Id love to know how and if you've fixed it. I know this post is old but if anyones out there, bump.
Related
Hey all,
Of late, whenever I try connecting my GALAXY 3 to the PC using USB, nothing happens. USB-Debugging is off. And it's supposed to ask me everytime I connect. But lately, nothing happens when I connect it. It does charge though however. And I do get the "Device Connected" sound. But that's about it.
Anybody faced a similar problem? Anybody know the solution to it? Will a reflash of the ROM do the trick? I currently use Kyrillos' ROM
cheekrox said:
Hey all,
Of late, whenever I try connecting my GALAXY 3 to the PC using USB, nothing happens. USB-Debugging is off. And it's supposed to ask me everytime I connect. But lately, nothing happens when I connect it. It does charge though however. And I do get the "Device Connected" sound. But that's about it.
Anybody faced a similar problem? Anybody know the solution to it? Will a reflash of the ROM do the trick? I currently use Kyrillos' ROM
Click to expand...
Click to collapse
Which os r u using in your pc. there is no need to reflash first check properly with yours and your friends pc or laptop then do anything.
Mohanshbhr said:
Which os r u using in your pc. there is no need to reflash first check properly with yours and your friends pc or laptop then do anything.
Click to expand...
Click to collapse
I checked with another PC as well, it's not getting detected. I'm on Windows 7 Professional.
i had also faced a similar problem.
SOLUTION THAT WORKED FOR ME-go to settings -> privacy and do factory reset.
also go in recovery and there also select the third option wipe data factory reset...
after this the pc detected me...
hope this works for you..
dont forget to press the thanks button if it worked...
if you are using some 3rd party laucher........switch back to twlauncer (android launcher) and try.......
check whether you have phone drivers installed or not.....
if not install kies once...
danveer said:
i had also faced a similar problem.
SOLUTION THAT WORKED FOR ME-go to settings -> privacy and do factory reset.
also go in recovery and there also select the third option wipe data factory reset...
after this the pc detected me...
hope this works for you..
dont forget to press the thanks button if it worked...
Click to expand...
Click to collapse
How will I get my data back then?
Try this:
Make sure that the USB cable is not connected from phone to PC.
On the mobile, dial *#7284#
An app called 'PhoneUtil' will open up.
Under USB section, make sure that 'PDA' is selected. If its already selected, then select 'modem' and then again select 'PDA'.
Once done, press 'back' to exit the app
Now Plug the USB cable again. It should work now.
Seems a common enough problem, happened to me as well. The only way I fixed it was a factory reset (tried the phone util thing and it didn't work for me). To save your data I recommend you use a backup app such as my backup root. To do this you will need to root your phone which you can do easily with z4root which you can get here: tiny.cc/z4Root. It will only soft root your phone (temporary root only lasts till you turn your phone off) so it is easily reversable and no chance of brick.
nsm1234 said:
Try this:
Make sure that the USB cable is not connected from phone to PC.
On the mobile, dial *#7284#
An app called 'PhoneUtil' will open up.
Under USB section, make sure that 'PDA' is selected. If its already selected, then select 'modem' and then again select 'PDA'.
Once done, press 'back' to exit the app
Now Plug the USB cable again. It should work now.
Click to expand...
Click to collapse
worked. thanks.
cheekrox said:
worked. thanks.
Click to expand...
Click to collapse
My pleasure!!!!
Hi so heres the problem. My phone got cracked and the touch does not work at all. I am trying to use screencast to control the phone from my computer which requires ADB. The problem is the phone was never used that way before. USB debugging is enabled and when I plug the phone in I get the pop asking to allow usb debugging and says RSA key fingerprint etc.
The problem is I cannot click Ok or always allow! Is there anyway to manually add my rsa key fingerprint (through recovery adb or something) so this popup will not come up and it will just allow it? Or somehow disable/bypass this?
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can't find a solution nowhere.
I have the same problem, been trying to search online for few days, can't find the solutions.
Sammguy said:
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can find a solution nowhere.
Click to expand...
Click to collapse
bryanling said:
I have the same problem, been trying to search online for few days, can't find the solutions.
Click to expand...
Click to collapse
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
shaggy_kobain said:
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
Click to expand...
Click to collapse
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
bryanling said:
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
Click to expand...
Click to collapse
Enable developer mode (tap on settings, about and then tap on the build number 7 times to enable developer mode).
Then back to settings, developer options and turn on usb debugging.
Sent from my Note 3 via Tapatalk
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Sammguy said:
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Click to expand...
Click to collapse
Did you disable the mtp application?
drewcam888 said:
Did you disable the mtp application?
Click to expand...
Click to collapse
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Sammguy said:
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Click to expand...
Click to collapse
I too am having this issue... it is quite frustrating. I rooted using towel root and that worked fine up until the beginning of September then USB was gone gone gone!. I was thinking of just doing a factory-restore of my phone, but I am not sure that is possible with having Towel rooted my phone. I just don't know what steps to take. Any help would be greatly appreciated!
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
It takes two to tango; how do you know the problem is not the PC?
Older versions of stock software actually put the phone in Airplane Mode when you were using USB 3.0, and had an inactivity timer or something that would turn the USB link off after a while. That didn't happen if you were operating on a USB 2.0 link.
So, if your PC has any non-USB 3.0 ports (the connector will not be blue) you could try using a USB 2.0 port.
Sometimes intermittent behavior is caused by bad cabling or a damaged connector, so a second thing to try is using a replacement cable and/or alternate ports. (Don't buy bargain basement eBay $2 cables btw - you will get what you pay for)
good luck
nancyvf8 said:
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
Click to expand...
Click to collapse
Is this a phone that you flashed a custom rom, rooted, or unlocked the bootloader?
Hey everyone,
recently I got a YU Yureka (bought it 2nd hand), and it was all working very well. I installed a custom theme pack and was enjoying the phone for hardly one day. Things started to go wrong when I thought to root my phone. So I plugged my phone into the PC. But the phone wouldn't show. I tried different cable and different ports but couldn't get it to work. It won't even show in the device manager. No android device or No other troubleshoot devices were found in device manager. I tried unplugging and re-plugging while device manager is on screen, and I didn't noticed it refreshing or detecting the device in anyway. I also tried enabling USB debugging and tried to turn it on and off but still no luck. The phone is charging when connected to PC but its not detecting as a device. When I selected USB connection mode in Settings>Storage, it says 'USB is now disconnected'. So I thought I would do a simple restart and see if fixes the problem then came the worst. My phone is now kind of soft bricked. I said that I installed a theme pack before, and I think that was the problem. The theme had replaced my bootlogo so that might have been the problem. So I wiped my device in recovey mode and restarted. Now my phone is not turning on, Its stuck at CYANOGEN screen. The Worse Case Scenario - I can't even flash stock rom cause my phone isn't connecting to PC not even in Fastboot. I'm totally screwed.
Well I don't know if its a hardware issue. and if someone had this issue earlier and solved it, please share your solution kindly..
Thank you
sXhokage said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser: http://xda.tv/post70563666
Click to expand...
Click to collapse
Fixed. It was a hardware problem. Phone is working perfect now
what is real problem i can't say , but if you want to detect your phone by windows automatically ,
shut down your system , unplug power of your computer from main board / turn off ups > unplug ups from main switch > wait 2 minutes .> now in phone developer options > enable android debugging > restart phone > connect phone to pc with usb cable and now plug your computer power in main switch > start your computer that's all
Install windows media feture pack in the computer
Sent from my YU5510 using Tapatalk
I just dropped my phone and the screen no longer works but the phone does. I plugged it into my computer but I remember that when I have done that in the past I had to change it from charging mode to MTP mode using the screen. Is there anyway to change the phone to MTP mode without using the screen so I can get my files off of the phone?
Thanks
Was USB debugging enabled before? and if yes have you authorized your computer for the phone before?
smae said:
Was USB debugging enabled before? and if yes have you authorized your computer for the phone before?
Click to expand...
Click to collapse
Hi, i tried to replace the screen and broke the new screen. I need your help. If i connect a keyboard by OTG does Windows+N enter to settings menu? How could i do with a external keyboard to 1st> get to Build NUmber to Enable Developer Option. 2nd> Open Developer Options and Enable USB Debugging? How many times should i press down arrow + enter + etc + etc... Please help me!