Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can't find a solution nowhere.
I have the same problem, been trying to search online for few days, can't find the solutions.
Sammguy said:
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can find a solution nowhere.
Click to expand...
Click to collapse
bryanling said:
I have the same problem, been trying to search online for few days, can't find the solutions.
Click to expand...
Click to collapse
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
shaggy_kobain said:
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
Click to expand...
Click to collapse
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
bryanling said:
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
Click to expand...
Click to collapse
Enable developer mode (tap on settings, about and then tap on the build number 7 times to enable developer mode).
Then back to settings, developer options and turn on usb debugging.
Sent from my Note 3 via Tapatalk
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Sammguy said:
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Click to expand...
Click to collapse
Did you disable the mtp application?
drewcam888 said:
Did you disable the mtp application?
Click to expand...
Click to collapse
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Sammguy said:
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Click to expand...
Click to collapse
I too am having this issue... it is quite frustrating. I rooted using towel root and that worked fine up until the beginning of September then USB was gone gone gone!. I was thinking of just doing a factory-restore of my phone, but I am not sure that is possible with having Towel rooted my phone. I just don't know what steps to take. Any help would be greatly appreciated!
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
It takes two to tango; how do you know the problem is not the PC?
Older versions of stock software actually put the phone in Airplane Mode when you were using USB 3.0, and had an inactivity timer or something that would turn the USB link off after a while. That didn't happen if you were operating on a USB 2.0 link.
So, if your PC has any non-USB 3.0 ports (the connector will not be blue) you could try using a USB 2.0 port.
Sometimes intermittent behavior is caused by bad cabling or a damaged connector, so a second thing to try is using a replacement cable and/or alternate ports. (Don't buy bargain basement eBay $2 cables btw - you will get what you pay for)
good luck
nancyvf8 said:
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
Click to expand...
Click to collapse
Is this a phone that you flashed a custom rom, rooted, or unlocked the bootloader?
Related
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Did you restart the computer at all?
usb debugging enabled?
i have trouble connecting sometimes and it's always solved by restarting the phone.
Basementboyz24 said:
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Click to expand...
Click to collapse
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
megabiteg said:
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Click to expand...
Click to collapse
Did everything up till 5, and that did not work because the computer would still not recognize the phone. What now?
squshy 7 said:
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Im Using Vista and No Drivers were there.... And I guess I may be at the last resort point. Full details?
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
I had issues with mine taking the update (and issues with it beforehand) and getting it recognized on two different computer, multiple times, it seems completely random whether or not it would work sometimes.
thepervster said:
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
Click to expand...
Click to collapse
Any confirmation on whether or not this is safe and will work???
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
thepervster said:
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
Click to expand...
Click to collapse
I dont see how this is going to help me since I am not on stock....
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
thepervster said:
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Click to expand...
Click to collapse
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Basementboyz24 said:
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Click to expand...
Click to collapse
Hate to ask, but did you follow the instructions EXACTLY as the SW Updater tool says? Pull battery (next) - Download mode (next) - plug into PC (next) - Pull battery (again) (next).
One of the steps the tool does has to do with installing drivers... you mentioned Vista, but is it 32 or 64 bit? Have you tried a different PC?
Whosdaman said:
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
Click to expand...
Click to collapse
I have the exact issue with my phone. I can only connect to my computer using the back usb ports (off the motherboard). I'm on windows 7. If you haven't, give that a shot. Even try uninstalling the drivers, connecting to the back usb ports and see what it does.
Saw someone post about Odin only working when they flipped the phone face down - thought it had something to do with the accelerometer. I suspect that in that case it might just be a bad connection and flipping the phone over made the contacts work. Worth trying though it you are desperate.
Just ran into a problem which took me some time to solve. Thought I would share it to save other people some frustration.
After an adb reboot the i5800 got stuck in "modem" mode. i.e. android booted fine but gave a modem and a serial port over usb rather than adb. Reboots did not solve the problem.
The solution is to enter recovery screen:
reboot recovery
OR
press proper buttons to get into recovery mode
And then perform a reboot from there
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
miki.antena said:
Is this the same as *#7284# and selecting "PDA" on UART and USB, or just on USB? Or is this a completely separate thing?
Click to expand...
Click to collapse
Thanks so much for this!!!! After helping hack a friends build.prop to enable Apparatus compatibility in the Market, I found USB wasn't working properly anymore. Resetting changes in the phone didn't help (I had to do this via the phone terminal) although I at least managed to buy Apparatus before the sale ended.
After initially getting confused due to a lack of drivers and the occasional 'nH' showing up devices without drivers which made me think something was borked, I worked out from the VID & PID it was just the lack of drivers making (well I'm not sure why it did the 'nH' sometimes it got serial something instead), once I installed the drivers all was fine.
Except still mass storage wasn't showing and the Samsung connect manager didn't show up on my phone when I connected USB, nor did ADB work at all. In fact, it didn't even show up in the phone menu as debugging mode if I didn't start phone with it connected (or something like that). Funnily enough when I did get it the debugging to show up I did get the USB mass storage to show up in the phone, but it didn't help (it just unmounted the card which I think is all it ever does).
Anyway after a bit more fooling around I eventuall came across http://forum.xda-developers.com/showthread.php?t=1215103 and the stuff about modem and mkasick's post which sounded a lot like it could be my problem. The code for that Samsung phone didn't work so I searched for the 5800 and came across this giving me the right code. Sure enough UART (but not USB) was set to modem instead of PDA. I was unsure whether that was wrong but changed it anyway and yep that fixed it!
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times. In fact most of the stuff except install a superuser update has been more or less repeated. I guess it was just some strange rare occurence that it somehow got changed. I did have to reconnect the USB while working the first time, not sure why but ADB lost connection then I found couldn't connect. Perhaps that's somehow related. Now that I know what to do, it's trivial but very annoying when I didn't. I still don't get why Samsung decided to make the connect manager (my phone doesn't have that) only to have some hidden option where it can be set to modem or USB.
Partially because of this, I never got to get Tilestorm HD become compatible in time for the sale although my friend wasn't so interested in that. (Eventually I worked out using the THC Tattoo modded market which reports a fake resolution enables it. Well, I also modified the build.prop but I don't know if that was necessary. I wasn't able to do it solely by the build.prop. But it was way too late by then to buy Tilestorm HD cheap.)
Nil Einne said:
I still have no idea what went wrong. I had thought may be the phone didn't like me rebooting via ADB but I've now done that several times.
Click to expand...
Click to collapse
This may sound like crazy idea, but is your USB port/connector clean?
(The USB port allows for dozens of different phone functions when using very specific resistance between data pins.)
i bought a LG D802 32gb last night as i was using a 16 gb before i wanted to flash cloudy g3.. so i tried to install custome recovery twrp...
now i am in fast boot mode..
it says :
[880]fastboot mode started
[910]udc_start()
when i attach usb cable
[1100]-reset-
[1110]-portchange-
[1120]-reset-
[1130]-portchange-
[1140]-fastboot: processing commands
i tried holding volume + and and attaching the usb cable but no luck ... so now i have NO RECOVERY, NO DOWNLOAD MODE, AND MY WINDOWS PICKING UP MY PHONE AS "USB MODEM PHONE ADB PORT"
please help
Hey guys I tried to connect my nexus 7 to my Windows 7 laptop but nothing popped up it just showed as charging on my n7 I've tried update the drivers and different cables and different laptops too but it's all the same, even fastboot doesn't show up or mtp in twrp, any ideas how to fix this guys?
Anyone got any idea how to fix this problem?
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Fobos531 said:
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Click to expand...
Click to collapse
Cheers mate but yep I tried that and nothing changed
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Armeddy said:
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Click to expand...
Click to collapse
Do you twrp installed mate?
No, I do not.
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Have you tried a different cord? If its not the cord the inspect the port on your phone to make sure no lint or crud is physically blocking some pins. Do you have developer options enabled? Maybe something got changed in there. Its never happened to me so these are just guesses. Maybe somebody smarter can help.
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Mine gives a notification that the phone is charging when I connect to computer but if I click the notification it gives me the option to transfer files instead. You do have USB Debugging enabled on the Developers Menu, correct?
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
driss.sadok said:
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
Click to expand...
Click to collapse
I've even changed my USB port and daughterboard twice. I am stumped. I got 3 laptops 2 running 10 and one running Ubuntu and mAid along with a tower running xp. I fix unfixable phones and resell them. I've tried EVERYTHING. I know this is an old thread but Any help would be appreciated.
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
armibu said:
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
Click to expand...
Click to collapse
Open beta or stable? Which version exactly?
strongst said:
Open beta or stable? Which version exactly?
Click to expand...
Click to collapse
I'm running the current stable Oxygen OS 5.1.5(ONEPLUS A500_23_180808), unrooted. I'll try installing the new beta, since fastboot mode still gets recognized by PCs.
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
lhoria46 said:
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
Click to expand...
Click to collapse
You have not the same problem... Op wants to transfer data while usb debugging is on. But it works only when usb debugging is off.
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
lhoria46 said:
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
Click to expand...
Click to collapse
The op can transfer files with USB debugging disabled. You can not. So you have another issue please read OP again
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
armibu said:
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
Click to expand...
Click to collapse
lhoria46 said:
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
Click to expand...
Click to collapse
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
strongst said:
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
Click to expand...
Click to collapse
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
armibu said:
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Click to expand...
Click to collapse
lhoria46 said:
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
Click to expand...
Click to collapse
Have you tried another PC, checked your driver, firewall etc?
Common issue across all devices
Just a suggestion.
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
lhoria46 said:
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
Click to expand...
Click to collapse
And you have which oxygenOS version?
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
lhoria46 said:
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
Click to expand...
Click to collapse
Really strange... OOS 5.1.5 and OB19 and before.
Never had any issues and also others not report such issues