Hi there...
First of all I would like to say hello to everybody coz this is my first post here.
My problem about the battery of my ipaq 614c it's really strange; I don't know if it's relative to the upgrade to WM6.5 but since I've done it I can't charge it through both usb and charger when it's turned on. When I connect the cable to the device the orange light only appear for a while without charging it.
Another strangeness is that the battery bar on ipaq is always at 100%..
Anyone's know if it's a battery problem?? What else could it be?
Thanks in advance.
Related
Hi All,
Have you encountered this weird thing in I-mate PPC while charging instead of climbing up it will discharge the main battery.
I've tried with other batteries but no use it's the main unit that's faulty.
Is there any solution for these problem? :?
Any advice is fully appreciated.
Thanks,
Junie
Hi all! Sorry in advance for my bad English.
I have a Qtek9100 with WM5. G4 IPL/SPL 2.21.0001
Now I'm experiencing a problem charging my device.
I had a miniUSB problem some months ago, when my device accidently fall from the desk, when it was charging. The charger get damaged, and the port miniUSB on the PDA as well, and it only charged in a position, making pressure on the miniUSB. Replaced the charger because it's not the only Wizard at home and my dad welded (I think it's how it should be said, but for translation problem I want to mean stick the miniUSB to mainboard like... "glue'ing" it) =$
It worked fine! First days but then, when I link it to charger the device show the icon charging, charging bar is moving normaly, but when the green led turn on. Battery Icon show it's full, but when unplugged it from the charger, the battery icon decrease a lot, like 20% or less.
Sometimes, when it's charging when I pick the Wizard, it's turned off, and the RED led is on. Like when it's fully charged, but RED!
Do you think it's a hardware problem? Mainboard? If it's a hardware problem at the Official Qtek store, They'll ask for more than the commercial value for the repair!
I love my Wizard. Can't get used with another mobile phone!
Please help me!
Thanks a lot in advance.
Regards, skrpn.
please i need solution for my trinity dopod d810 wm 6.1 Profesional
today my trinity won't charge,it still on 0%.my battery drain and wont charge again.i try to charging with wall Charging,but it can charge,it same when i try charge with USB connect to my laptop.
i think it's not because my battery is weak,so dont give me solution to change new battery.
anyone have problem same with me?please give me solution.now my trinity can turn on when i plug charge to my pda.
hi
dayat11 said:
please i need solution for my trinity dopod d810 wm 6.1 Profesional
today my trinity won't charge,it still on 0%.my battery drain and wont charge again.i try to charging with wall Charging,but it can charge,it same when i try charge with USB connect to my laptop.
i think it's not because my battery is weak,so dont give me solution to change new battery.
anyone have problem same with me?please give me solution.now my trinity can turn on when i plug charge to my pda.
Click to expand...
Click to collapse
i am having the almost same problem. my xda atom charge from company charger but for a while and after that it stops charging. but i can charge my atom from usb cable. very strange
I had some problems with charging as well. In my case there was so much dust inside the usb connector of the phone that it just wouldn't connect any more. I got all the dust out with a needle and applied a little spray to clean the contacts.
Works just fine now
Hi.
I haven't used my old Qtek 9100 for about one year, but now I need it again.
I connected the device to the charger and to the USB cable, but it doesn't power on and it doesn't charge.
I tried with another battery too.
What can I do to solve the problem?
What's happens?
Thank you very much for your help!
Bye.
I had the same problem , search around a bit you will find a thread about jump starting a battery with 3 aa size batteries. Good luck
Hello,
Does anyone know where can one find a good Ipaq 614c replacement battery? I purchased 2 new battery's from ebay, the blackish one's, but those don't seem to work on my Ipaq at all.even if its fully charged, the phone gives battery low status as soon as I pull out the charging cable.
Thanks in Advance.
Look at
HP 614c Battery
forum xda-developers com/ showthread.php?t=711840
I am satisfied.
Use search before posting a new thread.
MOD: Thread closed.