hello everyone!
after upgrading to bigstorage my jam discharges when plugged to the charger instead of charging!!!
it charges normally through sync cable.
any ideas???
thanks!
Upgrading to BigStorage has nothing to do with your battery problem as myself and so many other users have done so without having such experience. You have also proven that by saying that it charges properly with the sync cable. For sure there is a short circuit in your charger causing it to discharge the battery. Check for dirt inside the usb connector of your charger.
Well, I've BigStorage too, but I haven't got the same problem. Maybe you should check what zerimar said, and if the problem stands still, you should buy a new charge cable.
One question:
Before the BigStorage, the charger worked correctly?
thanks for answeeing!
yes, before upgrading everything worked normally.
when i plug the charger the orange light lihgts up as it should and the in the power screen it says 'çharging' , but it doesn't charge!
i've cleaned the cables, the battery and the sim card but still the same.
everything else works perfectly well.
Well, I guess the only thing that hopefully will help is to do a hard reset.
hey...i got the same problem. i even tried hardreset and the problem still there. there is nothing wrong with my charger since my charger works well with other magician.
i think the main problem is the magician unit itselves. i just dont have time to return it to the store since my life depends on it . well at least it still charges with sync cable.
ok now i'm mixed up.
i did a hard reset, downgrated to the previous original rom, but the problem is there.
it isn't the charger because when the backup battery reduses to 50% with charger it gets back to 100%
so my charger discharges my battery but charges the back up battery.
i did a lot of search, a few other people had similar problems but no solutions
found!
Try to fully discharge the battery in a natural way by leaving your unit on then charge again. Do not use your charger to discharge the battery. If my memory serves me right I think that's what some posters adviced.
I still believe that there is something wrong with your AC charger. If you have the possibility of borrowing a charger, or go to a shop who sells Magicians and ask if you could quickly make a test.
thanks a lot!
i'll try now and let you know!
discharging the battery did not work.
now i'll try the new ac adapter.
if it does not work then i'll just curry my laptop with me!!!
thanks for your help!
new ac adapter and everything works fine!\
thanks everyone!
Glad to be (and others) of help. Nice to know that everything is working fine and that you're happy.
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
FredyOliva said:
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
Click to expand...
Click to collapse
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
My friend, you are simple the best. You are my hero. I lost one USB cable, but my phone come back. Your "Jump Start" trick worked perfecty. Really thanks about your tip. I don´t have words to glad you.
zabardast_1 said:
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
Click to expand...
Click to collapse
Thanks !
really glade you have it up and running
Have a nice day !
zabardast_1 said:
Thanks !
really glade you have it up and running
Have a nice day !
Click to expand...
Click to collapse
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
FredyOliva said:
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
Click to expand...
Click to collapse
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
zabardast_1 said:
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
Click to expand...
Click to collapse
Thanks one more time and sorry to annoying you...
I LOVE YOU !!!
Thanks more than a lot
Jump start trick worked fine for me too !! I cut the wire off from old usb mouse and use it as informed.
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
But my battery is alive again and I m happy, thank you !
jagr55 said:
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
Click to expand...
Click to collapse
It's just a design flaw. Sometimes things get by engineers. They're too busy trying to create an interesting user experience, and they forget to cross t's and dot i's.
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
iceblade911 said:
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
Click to expand...
Click to collapse
Thanks you all,it was grrrrr8 to hear you all got your phones working again.
Have a nice day !
my qtek 9100 freezes at startup after jump starting.
I jump started my Qtek 9100 and it started up as normal but it freezes at the windows mobile loading screen and doesnt go any further. Does this mean its charging or is the battery completely dead or something?
Wow, it like totally worked but Then I let it charge but battery stays at 0%
Thanks for this thread.
My word am I happy ...
Worked like a charm...
You are my hero! mi Qtek is alive again, i bought a cheap wall charger for a V3 Motorola and it can charge my Qtek after a battery drain off, i tray a lot of things but the usb wire cut off solve my problem and im happy again, thanks a lot and greetings from mexico! Saludos!!
Thanks man it was worked for me,
I was trying to put windows mobile 6 but after that mu camera and voice call buttons doesn't work
If you know more about win mobile 6 on wizard pls help me
Thanks
please do not use stripped USB cable or 9V battery to resurrect wizard. the battery is rated 3.6-3.7V (?? cant remember)... use 3x AA(A) batteries or other 3-4V power supply. I've done this with old pc PSU which has 3.3V output.
Just put battery in, connect charger, connect + - cables while inside wizard - bootup - when windows is loaded device can charge itself - disconnect resurrection power supply.
do not try to charge li-ion battery with whatever currents/voltages... or at least wear some kind of fire protection
Hi all! Sorry in advance for my bad English.
I have a Qtek9100 with WM5. G4 IPL/SPL 2.21.0001
Now I'm experiencing a problem charging my device.
I had a miniUSB problem some months ago, when my device accidently fall from the desk, when it was charging. The charger get damaged, and the port miniUSB on the PDA as well, and it only charged in a position, making pressure on the miniUSB. Replaced the charger because it's not the only Wizard at home and my dad welded (I think it's how it should be said, but for translation problem I want to mean stick the miniUSB to mainboard like... "glue'ing" it) =$
It worked fine! First days but then, when I link it to charger the device show the icon charging, charging bar is moving normaly, but when the green led turn on. Battery Icon show it's full, but when unplugged it from the charger, the battery icon decrease a lot, like 20% or less.
Sometimes, when it's charging when I pick the Wizard, it's turned off, and the RED led is on. Like when it's fully charged, but RED!
Do you think it's a hardware problem? Mainboard? If it's a hardware problem at the Official Qtek store, They'll ask for more than the commercial value for the repair!
I love my Wizard. Can't get used with another mobile phone!
Please help me!
Thanks a lot in advance.
Regards, skrpn.
Hi Folks,
I have quite a big problem and hope that somebody here can maybe help me
Some weeks ago, my HTC Prophet fell into Water.
Now, when I try to charge my Prophet, the Battery DISCHARGES quite fast...
I tried the normal Charging device, as well as charging it with my USB cable and with the charging device in my car...its always the same
I also tried several different batteries (even the ones that didnt fall into water), but no success...
Do you know any solution for my problem besides charging my battery with an external device and not inside my phone?
Maybe a hint, what inside of my phone may be broken? And if it could be repaired?
Thanks alot,
Greetings,
Armitage
Hi there...
First of all I would like to say hello to everybody coz this is my first post here.
My problem about the battery of my ipaq 614c it's really strange; I don't know if it's relative to the upgrade to WM6.5 but since I've done it I can't charge it through both usb and charger when it's turned on. When I connect the cable to the device the orange light only appear for a while without charging it.
Another strangeness is that the battery bar on ipaq is always at 100%..
Anyone's know if it's a battery problem?? What else could it be?
Thanks in advance.