HTC magic 31A shows 192MB RAM !? - myTouch 3G, Magic General

Hi,
I have bought a HTC dream yesterday. When I press vol. down + power keys, it shows -
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Apr 29 2009,2:28:53
But "Android System info" , "Free memory", "Systray Monitor" software show that the RAM is 192MB.
In the "About phone" I can see-
Baseband version- 62.525.20.18H_3.22.20.17
Build number - sapphire-user 1.6 DRC83 14721 ota-rel-keys
Which one is real? How to check the real RAM ?
Since I paid for 288MB RAM version and I want to have 288MB RAM version, so it is very important for me to know ASAP. So that I can claim and change/get refund.
Please help me on this.

From what I heard its true that only 192 RAM is useable of the 280...
The 32b also report to have 192 RAM on the paper, but about 92 is useable only...
So yeah you have a real 32a...

Related

I have a Combination of 32A and 32B...wtf?

What i read:
From the wiki:
* PVT32A handsets have 288MB total RAM (192MB usable by OS - same as Hero handsets) and use the Qualcomm MSM7200A CPU.
* PVT32B handsets have 192MB total RAM (96MB usable by OS) and use the Qualcomm MSM7201A CPU.
Click to expand...
Click to collapse
My Phone:
Sapphire PVT 32B
HBOOT-1.33.2005
Ok so i have a 32B MT3G which is unrooted. The thing is it has 231mb of RAM left which means it has 288MB total RAM so it should be a 32A. My fastboot says its 32B soooooo im really confused......
What you have left is your ROM. Your ram is still 192MB. If you delete all your apps, your RAM will go back up to about 300MB. People have thought that they had the 32A board as well. Common mistake.
nvm got it

can you help me to Upgrade HTC Magic Tim 32A to Android 2.2

Dear All
i have HTC Magic Tim 32A and this is Software unlocked.
can you help me to Upgrade HTC Magic Tim 32A to Android OS 2.2 ???
Android 2.2 builds are nowhere near 100%, however 2.1 is but it's much slower than 2.2, 1.6 and 1.5.
Could you please print the information shown when you boot the phone holding down the - volume key?
Also this should go in general, it has nothing to do with development.
Mod. edit: not dev related, moved to general
adriank said:
android 2.2 builds are nowhere near 100%, however 2.1 is but it's much slower than 2.2, 1.6 and 1.5.
Could you please print the information shown when you boot the phone holding down the - volume key?
Also this should go in general, it has nothing to do with development.
Click to expand...
Click to collapse
sapphire pvt 32a ship s-on h
hboot-1.33.0008 (sapp10000)
cpld-12
radio-3.22.20.17
apr 29 2009,02:28:53
for now i would recommend a 2.1 version... like smoki

my t-mobile Fender isnt what it seems!

Hi hoping someone can help me, i just recieved a 2ndhand t-mobile Mytouch Fender edition , i got this as it suppossed to have upgraded cpu and mem from the old magic.
I have a few issues weather its really a fender/1.2 - also its already rooted from what i can tell
Recovery says v1.6.2G - shouldnt it be H ?
Fastboot says :-
PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.23.02 - looks like a 32b radio ?
OCT 2009 - these things were released jan 2010 i thought ?
Its running android 1.6
SetCpu overclocks to 576mhz and in info only reports total mem @ 195mb !!
Would like some advise on what you guys think this is before i install any roms, and different recovery images etc cas i think i got done over - hope not
Thanks
if it doesn't have a 3.5mm it is not a 1.2
I believe all fenders are 32B cause it says 32A but the roms dont work , So i did a 32B and they work fine

Need help identifying what version MyTouch that I have.

So I picked up a MyTouch from eBay a few weeks ago and have been toying with Rooting, Roms, etc. I noticed that when I install CM6 (Android 2.2) roms the phone will constantly reboot. I have been installing ROMs for the 32B original MyTouch board b/c when I pull up fastboot I get the information below
Device : SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
Radio : 2.22.19.26I
The really strange thing is that the available phone storage is 274MB. Is it possible that the person who sold it to me had put a 32A board (from a MyTouch 1.2) in a original MyTouch body? It still would not explain why fastboot shows a 32B board. I am really confused. How can a 32B board have that much available RAM???
No, that's correct. Both phones have 512mb of ROM for storage. Half of that holds the OS, the rest for your apps. Where they differ is in RAM, this is where the OS and running apps are loaded into to run. The 32B(original myTouch) has 192 mb while the 32A(myTouch 1.2) has 288 mb.
Sent from my T-Mobile myTouch 3G using XDA App
Well i can confirm that you have the right radio and spl.
The H or G in the first line er known to changed without cause if you play with spl/radio long enough :0)
Never happened to me though :0)

[Q] Any way to show total ram of MT3G 1.2?

Hello,
I check all information shows that MYTG3g 1.2 has 288 ram. But my phone shows only 192 ram. I have read the thread "MT3G 1.2 w/ 192 MB Ram?".
The internal storage shows only 256mb instead of 512mb.
However, I am wondering is there a tool to show the exact total ram of the phone? Why it only shows 192 ram?
I know my question is quite silly. I really appreciate any of your information.
Thank you.
My phone information is:
sapphire pvt 32a ship s-on g
hboot-1.33.0013 ( sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009, 20:33:27

Categories

Resources