Hi,
I've read on here that you can do a soft reset without taking cover off and pressing the actual reset button, but I can't find it again. I've looked on hints and tips, wiki, and searched. Can anyone help please?
Cheers
You'll be needing the TouchX Reset & Wifi shortcuts then
You can get them off this post...
http://forum.xda-developers.com/showpost.php?p=4947950&postcount=1
It creates 2 shortcuts in your start menu. 1 for resetting, and 1 for toggling wifi. You can then add to your quicklinks, if you so wish.
Hope this helps
You could always switch off + switch on but johncmolyneux suggested works as well, although I used a cab so as when I push the switch off button, I get a new menu with various options, including soft reset.
Forgot which one it is though
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
NeilM said:
The 'out of the box' method, without resorting to additional applications is to press and hold the Power key for 3 seconds.
This opens up a context menu which includes 'Power Off'. This is a full 'power off' state with all background processes stopped. Pressing the power button again restarts the phone as in a soft reset.
Click to expand...
Click to collapse
So turning the phone off and on again is a soft reset???? If that's the case why are there cabs for soft reset, seems a bit strange to me. Wish I'd known that before when installing some of the cabs and taking the back cover off to press the reset button
wacky.banana said:
Snerkler,
Some good suggestions here. Be aware that these will only work if the device is NOT in the grip of death, as I call it.
If it has died then there's no option but to take the back off and either press the little red button or take the battery out.
WB
Click to expand...
Click to collapse
I know what you mean about the "grip of death" lol. Been there already.
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
If the device goes through the splash screens on restarting (as after the power button 'hold' switch off) that is a soft reset.
I use a stand alone program called psShutXP which is available on This Page - download the VGA version. It runs as a small Screen Off/Suspend/Power Off utility.
Click to expand...
Click to collapse
I'm not sure what you mean by fully off, and simple on/off. Are you referring to power off, and sleep? In which case I was referring to power off, ie hold power button and then select power off
NeilM said:
Turning the phone fully off then on again is the same as a soft reset. A simple on/off isn't.
Click to expand...
Click to collapse
Sorry - could you explain that please? Is there a difference between turning the phone off, and "fully" off?? I assume you're not refering to simply switching off the display when you say a "simple on/off", as that's not off at all.
You've lost me there mate.
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
NeilM said:
There are 3 or 4 suspend states- sorry, but I can't remember what all 4 are
There is 'screen off' which simply turns off the screen but keeps all currently active programs running. This is only available by using a 'Display Off' or 'Screen Off' switch such as the 'Toggle Screen' option in Media Player. WFi and GPS remain active in this state.
The next is 'Suspend' by pressing the power button. This turns off the screen and some functions such as WiFi and GPS and some media players also stop working but the phone remains responsive and timed notifications will still work.
Next is the 'full power off' I mentioned which you get by pressing and holding the power button. This turns off all functions, phone features and stops all notifications working.
That's what I was clumsily trying to say when I mentioned that a 'full power off' has the same effect as a soft reset- as opposed to a 'screen off' or 'suspend'.
[Edit: Having tried this a little more, it may be that the HD2 doesn't differentiate between states 1 and 2 ?. Due to the lack of hardware button configuration, Media Player's Screen Toggle can't be assigned to a button. psShutXP's Display Off button works, but on turning on again, the lock screen starts, which shouldn't happed with a simple display switch. ]
Click to expand...
Click to collapse
OK, thanks for the explanation
Related
hello,
My S100 can not shut down when i press the power button during 2 seconds. (Note: Turning your device off doesn’t turn the phone off. To turn the phone off, press and hold for two seconds.)
It looks off, but it's not, the phone is still on !
I heard i can use the "inflight mode", but i'd like to know the correct manip' to turn off the device AND the phone !
Any idea ? :roll:
ROM : 1.03.02 FRE
Date : 11/02/04
the only correct way to turn the phone off is to use the flight mode.
if you pressed the power botton for 2 sec you will turn the screen light off.
regards.
Pressing the power button does not turn the phone off, that is an error in the manual as far as I know.
Only Flight mode turns off the phone function, when you press the power buton shortly the S100 powers down ( goes into sleep mode), when you press the power button longer the backlight goes off. If you look close, you see the screen is still on then and when you tap it, the programs you tap will respond. When you turn the S100 to sleep mode, the screen switches completely off and does not respond to anything.
You cannot turn the S100 completely off, since no power means no RAM, means a hard reset, means all data you installed gone. In sleep mode, the S100 uses very little power to retain the data and is still able to run alarms, notifications etc.
If you want an easier way to switch your phone to flight mode than tapping the signal symbol in the top and then tapping in the pop-up ,and create alternative modes ( like meeting, loud, soft, quiet, etc), I recommend PocketZenPhone, where you can easily create your own phone modes with buttons on your today screen. The app is very cheap ( 5 euro's) and the links can be found on this forum.
thanx a lot for you're answers ! That helps !
If I am correct, if I need to reboote the device and the phone (for instance, after i installed the "contacts short cut programm designed by Mamaich), the only solution I have is to remove the battery ??? :roll:
I tried to put the phone in flight mode and shut down the device but it didn't work....
I think you need to read your manual better!
Rebooting the device can be done by a soft reset. You just put your stylus point into the little hole in the bottom of the S100, right of the headset hole, and press. It then restarts completely and loads your programs again etc.
Removing the battery also soft resets, BUT: If you leave it out too long, the back up batery runs out and you do a hard reset, thereby removing all data on your device you installed! It will leave you with an S100 as it came from the factory, but all your own data is completely gone (programs, contacts etc)! A Hard reset can also be done by pressing and holding the power button while at the same time doing a soft reset as described above, by putting your stylis in the little hole.
With some programs, like SPB PocketPlus you can select a small reset button to be present on your today screen, so you don't have to push your stylus in the little hole everytime you want to soft reset.
I hope this helps.
Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
manu407 said:
Even when I untick 'On Battery power Turn off baclight if device is not used for ... Time', my Jasjar baclight goes off in 2 minutes. And, if I set this to 5 minutes still my Jasjar backlight goes off in 2 minutes. Also, when I choose to 'turn on backlight when a button is pressed or the screen is tapped, it doesnot turn on any button or screen tap. I can turn it on by power button or Call reject red button. Any registry hacks/ Am I missing something? I would like my backlight always on untill I press power button. Also is there any hack to turn on power/ backlight automatically when I open the lid?
Click to expand...
Click to collapse
Maybe a soft reset (fixes lots of weird problems like this). Cheers,
yeah and if soft reset doesnt help, do backup, sync with PC and do hard reset.
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
I asked this same question long ago with no real answer, i hate the small power button and its just to hard to find... If the power button could be relocated to the PTT that would make this phone awesome...
mitchg said:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
Click to expand...
Click to collapse
Start>Settings>System>Key Lock
Select "Do not lock buttons"
Hello.
My solution to this problem is to use MortSaver. It can be configured:
one press on (a specified) button sends the phone to standby
two presses on (a specified) button bring the phone back
one press on (a specified) button show the time, missed calls, mms/sms, battery and phone signal
I've assigned it to the upper right (Internet Explorer) button and it does the job well.
Best regards!
jZ
Not sure if this helps, but a friend of mine broke his power button, and now wakes his device up by ejecting and re-inseting his memory card.
Downloaded and installed the Shut Down Cab on my Wing. The three options are:
1. Light Off
2. Shut Down (Does not Power Off, only turns off screen?)
3. Soft Reset
My question is: Should Shut Down turn the Power Off? If not, what is the purpose of this compare to Light Off?
Thanks
Press any key if you press Lights off. You'll see that your phone is still on but just with the lights off.
Shutdown is like when you press your power button on the top.
Soft reset, well... speaks for itself.
ElProempie said:
Press any key if you press Lights off. You'll see that your phone is still on but just with the lights off.
Shutdown is like when you press your power button on the top.
Soft reset, well... speaks for itself.
Click to expand...
Click to collapse
Thank you. Apparently Shutdown and Lights off do the same thing for me as I can touch any key after using either one and the phone works as if it were Lights off.
Maybe I don't see the purpose of them as being separate functions.
Check "keyboard lock" (more or less.. my wing rom is in spanish) under configuration - system and make sure it's set to "block all buttons except power button" if not, every button will power on your device after shutdown, making it look like turning the lights on.
Hope works for you.
le_hades said:
Check "keyboard lock" (more or less.. my wing rom is in spanish) under configuration - system and make sure it's set to "block all buttons except power button" if not, every button will power on your device after shutdown, making it look like turning the lights on.
Hope works for you.
Click to expand...
Click to collapse
Yes, that is correct. That is why I said that both options are doing the same thing. I would have thought that one would Power Off.
Again, thank you for your input. I do appreciate it.
I'm new to Topaz. Every time I finish a phone call or a program, I need to wait for several seconds until the screen is turn off. In fact, I do not key lock my phone.
I wonder if there's any soft button (in any kind of program) can turn the screen off after I finish using the PDA phone?
Short press of the (hard) power button turns off the screen (but not the device). That's not satisfactory?
Hi jabok, thank you for yr reply and i noted the "hard" power button method. As the power button is located at the top of the phone and the button is a little bit difficult to press, in my opinion.
That's why I'm looking for a program or shortcut to have a "soft" button on-screen to turn off the screen
jabok said:
Short press of the (hard) power button turns off the screen (but not the device). That's not satisfactory?
Click to expand...
Click to collapse
Yes, you may try PSSHUTXP or SVMPOWERMGR. I am currently using SVMPOWERMGR which provides 4 shortcuts in Windows Start program and one of them is screen off.
black818pro said:
I'm new to Topaz. Every time I finish a phone call or a program, I need to wait for several seconds until the screen is turn off. In fact, I do not key lock my phone.
I wonder if there's any soft button (in any kind of program) can turn the screen off after I finish using the PDA phone?
Click to expand...
Click to collapse
You can use TouchLockPro and configure CommandCallEnded = !SUSPEND.
You can also couple a (hardware) key shortcut to TouchLockAction SUSPEND