I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
I asked this same question long ago with no real answer, i hate the small power button and its just to hard to find... If the power button could be relocated to the PTT that would make this phone awesome...
mitchg said:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
Click to expand...
Click to collapse
Start>Settings>System>Key Lock
Select "Do not lock buttons"
Hello.
My solution to this problem is to use MortSaver. It can be configured:
one press on (a specified) button sends the phone to standby
two presses on (a specified) button bring the phone back
one press on (a specified) button show the time, missed calls, mms/sms, battery and phone signal
I've assigned it to the upper right (Internet Explorer) button and it does the job well.
Best regards!
jZ
Not sure if this helps, but a friend of mine broke his power button, and now wakes his device up by ejecting and re-inseting his memory card.
Related
So I run S2U2 and have it set to blank screen on talk. This works great since I occasionally would hang up on people or press buttons when my face touched the soft buttons on the screen. However, I also have Key Lock setup so my phone doesn't randomly come on all the time and drain the battery while it's in the holster. I also had a couple occasions (before turning on key lock) where S2U2 didn't come on and I ended up calling someone without knowing it.
Anyway, the problem I run into now is that when I'm done on the phone and want to hang up, the end call button is locked out and I have to first press power to get the screen back and then hang up. Is there something in between where I can have both the power and hang up button enabled while locked? Optimally the hang up button would only be enabled during a call so it wouldn't wake up the phone when not in use. A search brought up products like AE Buttons, but I didn't see an option to do what I want.
Thanks,
Gonz
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
honduh said:
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
Click to expand...
Click to collapse
The only thing that I could suggest that might help is to get yourself a good case for your phone that would protect the button from being accidentally pushed. I have never had this problem with my phone. The button actually has to be pressed and held to bring up the power off menu. Even when not in it's case, I have never had this happen; however, the phone is only out of it's case, when I am using it. In the case, there is even less chance of powering off the device.
Rod.
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
TheChampJT said:
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
Click to expand...
Click to collapse
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Find what the application is that launches when pressing the button and add it to the S2U exclusions list.
I have a verizon and my power button toggles screen off and on, so im not entirely sure, Is this a stock popup or a program you installed ? There is probably a registry entry somewhere that defines how the power button functions jsut as the button manager does for other buttons.
honduh said:
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Click to expand...
Click to collapse
I understand your point, and am still wondering what it is you keep in your pocket with your phone that shuts it off!? Anyways, why do you keep referring back to the default device lock? S2U2 performs the same way, as it locks everything besides the power button. If the power button is locked, how would you wake up the device to unlock it ???
the power button has two functions, it blanks the screen if you press it, or it brings up the power off menu when you long press it. The problem i'm having is s2u2 doesnt prevent the power off menu from coming up, where as the stock device lock does. Thus, it is possible to completely power off the phone while the keys are locked.... of course I want to be able to wake the phone up with the power button, but i dont want to be able to turn it completely off.
And i'm not sure how it turns off in my pocket, except i usually carry it with the power button face down (phone upside down) and it must press against the bottom of my pocket...
The application that it is calling is the stock shut down menu, i'm not sure how I could add this to the exception list, as I dont know how to call it remotely....
Thanks again for the replies!
The title of this caught my attention.
It would be very nice to have a registry edit that will lock the device when powered off or on device wake up.
I use S2U2 and I am really not liking it personally, but it is better then the default setup currently I feel.
A couple of quick questions for people who have actually got the phone:
1) Is there an easy way to turn the backlight/screen on/off (to save battery) at the press of a button as you can on most other touchscreen phones?
2) How easy/quick is it to lock/unlock the phone?
3) Approx how many seconds is it from when you press the power button to when the phone is fully loaded and ready to be used?
Thanks in advance!
hotlips69 said:
A couple of quick questions for people who have actually got the phone:
1) Is there an easy way to turn the backlight/screen on/off (to save battery) at the press of a button as you can on most other touchscreen phones?
2) How easy/quick is it to lock/unlock the phone?
3) Approx how many seconds is it from when you press the power button to when the phone is fully loaded and ready to be used?
Thanks in advance!
Click to expand...
Click to collapse
1. Briefly press the Power Button.
2. To Unlock ~ Swipe your finger across the screen.
3. Depends:
Are you talking of from Powering On or from switching the screen back on?
If from Powering On:-
It really depends on how many Apps/Drivers installed but mine takes around 25 seconds from a long press on the Power button to fully loaded.
If from just switching on the screen:-
Instantly.... and can be switched on either with a brief press on the Power button or the Home key at the bottom of the screen.
Thanks for the reply!
I presume the power button is on the very top edge of the phone?
So would I be correct in saying that a brief press on the power button actually turns the display off (effectively locking the phone from the point of view of accidentally pressing something on screen if it's in your pocket for example) ?
But if the home button turns the screen back on in the same way as the power button, wouldn't THAT be prone to accidentally activating the phone when you don't want it to?
I've always found it much quicker to simply turn off the display instead of actually locking it.
hotlips69 said:
Thanks for the reply!
I presume the power button is on the very top edge of the phone?
So would I be correct in saying that a brief press on the power button actually turns the display off (effectively locking the phone from the point of view of accidentally pressing something on screen if it's in your pocket for example) ?
But if the home button turns the screen back on in the same way as the power button, wouldn't THAT be prone to accidentally activating the phone when you don't want it to?
I've always found it much quicker to simply turn off the display instead of actually locking it.
Click to expand...
Click to collapse
The power button is on the side of the phone, on the right side.
If you press the power button on Android it will lock and shut off the screen yes.
and you press the home button on any android device it usually activated the screen and then you have to swipe to unlock.
Thanks...I was getting confused.
So when you briefly press the power button, it actually "locks" the phone and turns off the display and needs to be "unlocked" with another press of this button & a finger swipe.
Is this hard coded or can you stop the "home" button from also trying to lock/unlock the device, i.e. can I simply use the power button to lock/unlock and the home button doesn't do anything in this state??
hotlips69 said:
Thanks...I was getting confused.
So when you briefly press the power button, it actually "locks" the phone and turns off the display and needs to be "unlocked" with another press of this button & a finger swipe.
Click to expand...
Click to collapse
Correct.
Is this hard coded or can you stop the "home" button from also trying to lock/unlock the device, i.e. can I simply use the power button to lock/unlock and the home button doesn't do anything in this state??
Click to expand...
Click to collapse
It is hard coded.
However, to switch the phone on using the Home button does require a significant press and it is recessed.
Very quick to unlock the phone, whether you use the swipe to unlock or the Android 'join the dots' security. I actually prefer this as you have a decent sized clock on the screen.
I presume the Simcard PIN request on device startup works the same as it does on Windows Mobile devices?
edit delete
I was playing a game on my Vibrant on my break earlier today and upon exiting it my screen locked up. Rather than wait for it, I pressed the power button to turn the screen off and went back to work.
A little later I brought it out to check the time and saw that the screen was on am pretty sure I saw that it said "Scanning media" at the top and assumed it had reset itself. A little bit after that I checked my phone again and saw the NoLed icon for new emails. I pressed the power button to turn on the screen and then tried to swipe it to unlock it but nothing happened.
That's pretty much where I am now. The volume and power buttons work but the screen is unresponsive (I can bring up the "Phone Options" screen but can't select any of the options) and none of the "soft" buttons on the bottom work either. Is my only option to do a hard reset?
And if it helps, this is a completely stock phone. Never been rooted.
I would just pull the battery.
I remember having something like that with NoLED, tr pressing the power button to wake it up and press the home key (unless you have it disabled in NoLED prefs) to get to the lock screen and unlock it.
Press and hold the power button until the phone reboots. That should take care of it.
icandy75 said:
Press and hold the power button until the phone reboots. That should take care of it.
Click to expand...
Click to collapse
Thanks! That did the trick. Could have sworn I tried that already but apparently I didn't hold it down long enough.
How many of you have faced the problem:
The power button is too out of reach to bring the phone out of standby. I used Xperia x10 earlier and the phone will show the lock screen once the middle button is pressed.
However for the Desire HD, i have to somehow press the annoying power button for it to display the lock screen.
Cant there be any other button which can shopw trhe lock screen cuz to reach the power button is not so handy.
Set your screen timeout to something quick. It will lock itself then.
I don't really have this problem as have biggish hands, but I can imagine what it'd be like.
Locking is not the issue.
Unlocking is the issue. To bring the phone out of standby and to show the slide to unlock screen, one has to press the "OUT OF REACH" and designed to "AVOID ACCIDENTAL" press button at the top.
I mean the top button is already a accidental press proof position. It really is a task to first press it ans then unlock the phone. Thats 2 procedures just to make a call.
Can some one mod this?