Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Which case for the Prophet would you recommend?
My main criteria are:
- Screen protection
- As slim as possible
- Leather (desired)
- Cheap :wink:
Any advice is greatly appreciated.[/list]
the slimest there is... you can't use the touchscreen unfortunatly (or am I wrong maybe?)
anyway I havn't seen a leather case that wouldn't make a brick out of a prophet. I find it strange - you can quite comfortably put a prophet in your pocket, wich makes it very portable, but you can't have a case that doesn't spoil it.
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
After much pondering I came to the conclusion that having no case was best. It keeps the prophets small foot print and is still very useable. Invest in a good screen protector though.
drwhitesnake said:
After much pondering I came to the conclusion that having no case was best. It keeps the prophets small foot print and is still very useable. Invest in a good screen protector though.
Click to expand...
Click to collapse
I felt exactly the same until I accidentally dropped mine about 2 1/2 feet onto a tile floor and it dented/scratched the top corner of the device. Not extreme, but it was only a light tap on the ground.
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
I saw one that had a flip down plastic screen protector as well, but figured that was a little overkill.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
But even now I feel like one of those guys that leaves his television remote control in the cellophane wrap so that it won't get any wear and tear... it was made to be used!
vsc said:
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
Click to expand...
Click to collapse
Hi vsc, that is a great case - the best I have seen so far! Thanks for the link.
I see that this case is for the Jam though - are the Jam and Jamin 100% identical (the form is identical (I believe) but not the button arrangement, right?).
I will contact ebcases directly also.
Thanks!
I asked the guys in the UAE and was told that the JAM / JAMin are identical. From the spec sheet they are within 0.2mm in size.
To be honest I had one of these in hand a few weeks ago and there was no issues with button placement and fitement in the case.
thulsey said:
I felt exactly the same until I accidentally dropped mine about 2 1/2 feet onto a tile floor and it dented/scratched the top corner of the device. Not extreme, but it was only a light tap on the ground.
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
I saw one that had a flip down plastic screen protector as well, but figured that was a little overkill.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
But even now I feel like one of those guys that leaves his television remote control in the cellophane wrap so that it won't get any wear and tear... it was made to be used!
Click to expand...
Click to collapse
That is the reason why I really think that a protecting case is necessary (in case the device falls that is) - specially for a $600 device.
On the flip side, adding unnecessary bulk to a device which was purchased due to its slim form factor is kind of contradicting. Thus, I am searching for a very slim case, which still provides protection.
thulsey, which silicon case are you using? Have you heard of Skintight cases from Pamwarelabs http://www.palmwarelabs.com/Products/ProdList.aspx?CateID=36 ?
vsc said:
I asked the guys in the UAE and was told that the JAM / JAMin are identical. From the spec sheet they are within 0.2mm in size.
To be honest I had one of these in hand a few weeks ago and there was no issues with button placement and fitement in the case.
Click to expand...
Click to collapse
Thanks vsc!
As long as the cut outs are not covering buttons, I guess thats fine then.
So, from the pictures of their website, the case really looks very tight and it appears that it doesnt add any (at least not too much) bulkiness to the s200. How does the case appear if you saw this it in person and on a Prophet? Do the pictures reflect the impression given on their site?
What about these?
Has anyone tried out the aluminium cases like the ones sold on expansys? Or this one for example
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=71
I know the last one is kind of not a case, but a carying holster, but nevertheless...
Yes the pictures are a good representation of the actual case.
Note that the cover flap has padding on the outside surface, but the supplier can manufacture the case without the padding to reduce volume. There is a hard card within the flap, so I don't consider the padding to serve any purpose.
On the other hand the case I'm using while I wait for the leather case is from Brando,
http://shop.brando.com.hk/bwsiliconecase_details.php?id=49
Simply put the unit in your pocket with the screen facing inward.
vsc said:
Yes the pictures are a good representation of the actual case.
Note that the cover flap has padding on the outside surface, but the supplier can manufacture the case without the padding to reduce volume. There is a hard card within the flap, so I don't consider the padding to serve any purpose.
On the other hand the case I'm using while I wait for the leather case is from Brando,
http://shop.brando.com.hk/bwsiliconecase_details.php?id=49
Simply put the unit in your pocket with the screen facing inward.
Click to expand...
Click to collapse
I will contact the supplier to see how much the case would be without the padding. Anything, which makes the case a little slimmer helps - specially for that price.
Btw, is it cumbersome to put the silicon case on and off? I was thinking about the silicone case but I would have to put the device out of the case every day (for charging in desktop cradle and car mount, etc) and dont want o fiddle with this each day. Way easier to simply slight it into a case.
Changes to the case were US$10.
With respect to the Brando case...seconds. The problem is really related to the material's affinity for dust. Drop it in your pockets and you would be amazed as to the mount of crud it picks up. It wipes off with a microfiber cloth or cleans up with water.
Craic Dub said:
I will contact the supplier to see how much the case would be without the padding. Anything, which makes the case a little slimmer helps - specially for that price.
Btw, is it cumbersome to put the silicon case on and off? I was thinking about the silicone case but I would have to put the device out of the case every day (for charging in desktop cradle and car mount, etc) and dont want o fiddle with this each day. Way easier to simply slight it into a case.
Click to expand...
Click to collapse
got a brando silicone skin and it tore in the corner of the screen where it is thin. It also had a spot on the keypad that was thicker making it look like a black dot and not transparent. I found it to fit very well, but was a little thick, felt like a Wizard when holding it. Dust isn't too bad if you're not a dirtbag.
got a brando silicone skin and it tore in the corner of the screen where it is thin. It also had a spot on the keypad that was thicker making it look like a black dot and not transparent. I found it to fit very well, but was a little thick, felt like a Wizard when holding it. Dust isn't too bad if you're not a dirtbag.
Craic Dub said:
thulsey said:
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
Click to expand...
Click to collapse
That is the reason why I really think that a protecting case is necessary (in case the device falls that is) - specially for a $600 device.
On the flip side, adding unnecessary bulk to a device which was purchased due to its slim form factor is kind of contradicting. Thus, I am searching for a very slim case, which still provides protection.
thulsey, which silicon case are you using? Have you heard of Skintight cases from Pamwarelabs http://www.palmwarelabs.com/Products/ProdList.aspx?CateID=36 ?
Click to expand...
Click to collapse
The one I'm using is very similar to the one from Palmwarelabs. It even has raised icons on each of the buttons so you can (sort of) feel what you're pressing. I think it's a local brand here in Taiwan, but I'll look into it and see if I can find it on the web.
When I was searching, I noticed that there are several different thicknesses of silicone, and various levels of craftsmanship that go into cutting things out (like the screen area, infrared port, etc.)
Get the flexskin from www.boxwave.com!!
You won't be dissapointed!
Hey...
Aluminium cases anyone???
vsc said:
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
Click to expand...
Click to collapse
hey vsc, I talked to EBCases today and they said that the case for the Jam wont fit the Jamin due to different button arrangements.
According to EBCases' customer service agent (very friendly and helpful!), they are working on a new case right now, which will then fit the Jamin. The new case would probably take another 4 weeks in order to be released.
I might just wait for this new case, since their case really is the best I have seen so far (and I have looked at a lot of them).
I am thinking of getting a case to protect my Kaiser...
What do you guys think of this HTC Kaiser Body Guardz:
http://www.thepocketsolution.com/PSI-42272.html
I know it is transparent, but it is not clear if it will protect it from falls, etc...I doubt it...
/MN
weird ...
every other variations of the Kaiser ( TYTN II/8925/TILT/Vario III )is out of stock except for the "TILT" is available for ordering ...
http://www.thepocketsolution.com/PSI-42589.html
must be vendor error or NOT YET AVAILABLE ( should all be same ... except for the single camera model ) ... I would email & ask ... I think this is just website putting it up way before the device came out ... ( roughly within the last 2 weeks, if you covering all the variations coming to be reality. )
curious ... on one of the demo video ... they had the iPhone protected right over that touchscreen ... I got to thinking ...
if their measurement are top notch ... hopefully the one for the Kaiser does the covering for the screen too !!
we can skip the screen protector altogether ( its thickness replacing the screen protector's thickness ) ... LOL
those thing dries to an invisible result !! COOL stuffs ... I'll be ordering one for sure .. plus I'll get a cool case as well. ( because the guardz is mainly for nick & scratches ... not dropping.
The bodyguardz is because my Kaiser deserved the spoiling ... hahahah
this is weird indeed... I just checked a moment - it doesn't update the stock status until you get into the cart...I will shoot them an email?
what non-magnetic flip case would you recommend?
rgds, MN
I like that the back of the Kaiser is "slightly rubberized" it keeps it from slipping around like the old Hermes did. Does this cover feel the same way? I probably wouldn't go for it either way, but, if it is slippery, it takes away a nice feature IMO.
liking the look of the bodyguard thingey! is it tough/ - ie drop proof?
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
i've been watching that site for 3 weeks now waiting for them to get the skins in stock. well, my order went through without a problem
give us a feedback when u get it dude
traveling on business all week, but will follow up when i return next weekend.
jgermuga said:
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
Click to expand...
Click to collapse
As i've mentioned earlier about the iPhone howto video ...
Could you tell me how good the touch sensitive screen reponses when it have the "bodyguardz" covered ??
note: ... only certain kit(s) goes this way of "covering the whole screen" ... if it works well ... I hope the TyTN II kit do the same ...
thickness is similar to a screen protection I guess ... there's one video for the MACBOOK and it does the "covering of the mouse's touchpad" as well ... so I guess it works really well then.
YOUTUBE howto vids ... all sorts
http://www.youtube.com/results?search_query=bodyguardz&search=Search
~~~
ok guys (and any girls) i just applied the BodyGuardz to my Kaiser and took a few pics before hitting the road... I've included 10 pics in the attached zip file. they're not the best pics, but hopefully they give you some perspective on fit, look, etc. keep in mind that it takes 24 hours for the bubbles to disappear. the pics were taken about 3 hours after application so you'll see some bubbles here and there. by the way, you get 2 sets of skins and 3 screen protectors with the kit. each set includes a skin for the left and right sides, one for the top, one for the back and one for the front. the left side skin also covers the bottom of the phone. so far I'm pleased. i like the somewhat tacky-feel and now i know my phone will be protected from scratches when in my pocket. overall this is a pretty good value.
InvisibleSHIELD
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Park City said:
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Click to expand...
Click to collapse
I too think they make the best protection for our devices. I've used them on my previous Wizard and Hermes and loved them. The problem I see with putting them on the Kaiser/Tilt is that there's really not much real estate to cover. There's the screen (of course), but that's about it. I personally wouldn't want to cover the back because I like the grip I can get from it. The sides are "ridged", and can't be covered. And the rest of the face is just too small to cover.
But they're really good about making custom shields if you bring in your device to them and it's only like $10 more than their usual charge. But once they make a template, no more custom build fees.
I bought the invisibleshield for my 8125 many years ago. It was a big waste of money. I hated it.
i too had reservations about using a "skin" to protect my Kaiser. i just recently applied the BodyGuardz to my device and as of know, i think i'll continue to use them. this is a link to some pictures (some good, some not so good) in case anyone's interested to see how it turn out.
i had this for my wizard. I love how friendly customer service was. If for some reason, you screw up your cover, which is pretty hard to do, then you can ask them to ship you another one paying for shipping as long as you register.
Only complaint is that it's a little too thick. Didn't feel good with the stylus. But at least I was confident that my screen wasn't going to get damaged.
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
little_rock said:
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
Click to expand...
Click to collapse
yes, it's thin and it covers a significant portion of the device. durability is good at the moment...time will tell how well it protects the device.
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Corinna said:
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Click to expand...
Click to collapse
I am pretty sure it will unless it covers 100% of the back. I kept my protection film on the battery cover for 2 days of use, when i took it off, there was a very noticeable trace from where it was.
I am looking at purchasing this case i was wondering if anyone could give me the run down on it? I ended up buying a tilt becuase i am a tech fan and a hoobiest programmer, a gadget lover, im not a buisness man. I am a commercial electrition during the day and drive pizzas at night. I really love the tilts gps and i use it to listen to podcasts and internet radio in the car. I currently own a leather belt clip case i keep the tilt in most of the time, but im looking for a case solution when im out doing elctrical work. This includes anything from pulling huge cables to digging ditches.
I usually end up going through phones twice a year i beat them up at work pretty bad. I wont be using this monaco as a primary case just while im out in the field. I bascially just need to use my kaiser as a phone and maybe some texting when its in this case. I found the case here http://www.tiltdepot.com/att-tilt-metal-cases.htm the review said it limits the touch screen functionality. So what im wondering is will i be able to still use the creen i mean i just need to be able to use handwriting recognition and some acuall touch support in spb shell and finger based vistual KB's. How does this limit the touch screen?
aA;so how much bulk does this add becuase im also going to need to put the phone in a pouch or something to keep dirt out of the buttons.
I don't have any experience with this case to share I'm afraid. One of the common complaints with metal cases is signal attenuation. You might want to look at one of the Otterbox cases, but you'll still have to pull it out to use the keyboard.
hey buddy. I got a metal case from an australian company called pdair. I've had it since i bought the phone a couple of months ago. It's saved it many times and it doenst hurt the signal at all. BUT, it does have a polycarbonate cover so it does hurt the touchscreen function, but i just use the D-pad anyway. http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Is the outter box 8000 the one for the tilt? can you hear the phone ring in the outerbox.
Christian see im just wondering if the touchscreen works at all how much does it impair the phone? Im not really worried about the signal anyways im not going to be using the phone in this case all the time. I dont plan on surfing the net or anything while im trying to pull wires down 4 stories of building. Just need to be able to send or recive calls and texts. I think i could deal with flipping the case open and using the keyboard but im still curious how well the touch screen works.
boorishid said:
I am looking at purchasing this case i was wondering if anyone could give me the run down on it? I ended up buying a tilt becuase i am a tech fan and a hoobiest programmer, a gadget lover, im not a buisness man. I am a commercial electrition during the day and drive pizzas at night. I really love the tilts gps and i use it to listen to podcasts and internet radio in the car. I currently own a leather belt clip case i keep the tilt in most of the time, but im looking for a case solution when im out doing elctrical work. This includes anything from pulling huge cables to digging ditches.
I usually end up going through phones twice a year i beat them up at work pretty bad. I wont be using this monaco as a primary case just while im out in the field. I bascially just need to use my kaiser as a phone and maybe some texting when its in this case. I found the case here http://www.tiltdepot.com/att-tilt-metal-cases.htm the review said it limits the touch screen functionality. So what im wondering is will i be able to still use the creen i mean i just need to be able to use handwriting recognition and some acuall touch support in spb shell and finger based vistual KB's. How does this limit the touch screen?
aA;so how much bulk does this add becuase im also going to need to put the phone in a pouch or something to keep dirt out of the buttons.
Click to expand...
Click to collapse
in short I say buy this case. I have this same monaco case and I love it. I work in a warehouse mostly sometimes on a roof helping install solar panels and such, much the same as you im sure with the wire everything from #12 to 600mil. I don't do a lot of pulling but am around it all day and conduit and a forklift oh you get te picture.
this case provides the most protection I can imagine and still have the phone functionable. my case hase seen the concrete from about 10 ft and no problems. scratches of coarse but phone was un harmed.
in short great case great protection and a great buy for me I purchased mine about 2 months ago and I paid $14 or so pre ship on ebay.
get it you won't regret it.
(if you do ill buy it from you)
hope this helps.
mrphat, can you still use the touchscreen at all?? that is what i really want to know, how much it limits the touch screen.
I mean im going to need a tuff case no matter what, not so worried about dropping it, but sliding 4 750s over leg while they get tugged down a pipe is enough to crack the screen in a leather case.
The Pdair case protects/covers the whole phone(including touchscreen) but leaves the access features accessible (i.e. D-pad, answer/end buttons, stylus. etc). You can hear the phone very well and at work i just use the D-pad to answer the phone. Since i have an S2U2 all i do is get it out of standby and i can check quick vitals that way. . Whenever i get a text or something like that, i just open the case and use the phone that way.
After looking at the monaco case, it's EXACTLY the same as the pdair case. Both are aluminum and both have the polycarbonate screen protector.
thanks thats what i really needed to know
I originally bought an aluminum case for my Tilt because I wanted the extra protection. In my experience:
* All of the aluminum cases I've seen appear to be pretty much the same. eBay is littered with them for about a quarter of the price that Tilt Depot is charging. Search "Tilt aluminum case"
* You can use about 90% of the device's features with the Dpad and other keys, but you can't dial the phone without opening the cover.
* I did experience about a one-bar loss in signal with the phone in the case vs. the phone not in the case.
* The case that I had was slippery as heck. I wound up attaching a wrist strap to the phone and would never use the device without strapping in first.
* The aluminum case is a little bulky.
I switched to a rubberized case and don't miss the aluminum nearly as much as I thought I would.
You probably need the extra protection for your day job, and the aluminum case will certainly provide it. Trust me, though, trying to flip open the cover and dial the phone one-handed while you're driving is a huge pain in the rear, not to mention dangerous.
well what about these outerbox cases can you hear the phone ring will they fit in your pocket?
I mean im going to have to keep the aluminum case in a pouch anyways beacuse i work in palm springs wich is all desert and any underground work is in sand, so i have an issue with dirt getting in the buttons too. If im going to be taking the phone out of a case to dial might as well take it out of one instead of two.
boorishid said:
mrphat, can you still use the touchscreen at all?? that is what i really want to know, how much it limits the touch screen.
I mean im going to need a tuff case no matter what, not so worried about dropping it, but sliding 4 750s over leg while they get tugged down a pipe is enough to crack the screen in a leather case.
Click to expand...
Click to collapse
questions been pretty much answered I guess and yes the case needs to be opened to use the touch screen , but trust me it is easy to get acustomed to. as the poster said a few posts up it does work well with s2u2 and the dpad.
forgive me if im wrong but is there a otterbox case made for this device specifically?. I know the ones I've seen are pretty generic and very bulky.
I have mine in the case and I purchased a leather pouch for a BB Curve from the Dollar Tree for a buck its real cheap fake leather so I bought like 4 of them. I just slide it in there. the belt clip is sturdy but doesent allow you to set it down and use it. maybe this helps ?
I also agree that pretty much all of the cases (aluminum) are the same I just happen to own the monaco.
emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.