emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.
Related
I am so upset, i just got my universal on saturday, i have been enjoying it but i could not use it as a phone because i needed to unlock it. I had the damn thing in my pocket and was on a phone call on my other phone in the car, in my front pocket, not back. Got out of the car, walked into the hall and opened it and there it was, A BIG UGLY black gash on the screen, the screen cracked, it just in my pocket!!, closed too! Where can i get this fixed, i am in the states and the phone is not sold here so i don't know here to get it fixed. Please, the LCD liquid has made a dark smere across the left side, i need help, please. Also what is the best case to get, so this does not happen again?
Check Pocket PC Techs. They will replace the screen for you.
how?
Please how do i get to them?
ok
ok, thanks, thats really expensive, ok, what is best case to use for this device?
Broken screen resolution
Ok thank God i don't have to pay over $250 to get my screen fixed. T-mobile Uk agreed to replace it since it was gotten through them. The way this still happened baffels me. I have had my MDA3 for over 6 months and it has fallen about 4 times, and stuff and it still works fine, but the exec screen broke while in my pocket. Strange. My question is that, for people who have an exec, do you leave it in laptop mode or tablet mode most of the time, and have u had to replace yours or do a repair?
Broke my Wizard to, im so damn worried about my universal. Don't got the money over to fix that screen if it's gettin broke, have had almost all pda phones you can get in .se and never cracked any screen but damn qtek ive done it on
I use a krusell case but not because it is the best but because it was the only one available on hand. It cost 29€ here in spain.
Also, I never leave it in tablet mode in my pocket. Always in Laptop mode.
It's only in tablet mode while it's on my desk.
Purchase a metal case. You can keep it in PDA mode and view the screen while inside the case. It also has a belt clip
UD.
Thanks
I pray the second one does not break when it arrives, it is too expensive to fix these things. Can you post a link to the case? i have looked at most of the cases on here, i think i will go with the one for the T-mobile side kick 2, it is cheaper and looks ok. I just need something with a strong belt hook and is well paded, so if it is on my hip and something actually presses on it this time, it will not break.
I must admit , I feel my Unirversal is more vunerable than any other device I have ever owned - can't quit put my finger on why , but I feel as if it wouldn't survive being dropped as well as myXDA, XDAII , s100 , or wizard for that matter !
The XDA / XDAII came with a nice case vertical flip case with a metal plate in the flap - which would be ideal in my eyes , but I have only seen one like that on Ebay for the exec (Via hong kong! ) and I suspect the one you actaully receive may be different (horizontal )
here is the krusell case link:
http://www.krusell.se/product.php?productID=2095&category=7
and here is a metal case link:
http://www.proporta.com/F02/PPF02P05.php?t_id=1355&t_mode=des
hope this helps
I had an XDA 3 and used a metal case. BIG ERROR!
one day the belt clip connector of the case broke and the device fell down, cracking the screen.
For my Mda Pro I ordered one Piel Frama case, which has not only a belt clip but also a fixed belt latch (you can take of original clip and then below) which should not break.
Also this case protects the device from all sides and seems to be thick enough to give it good protection in case of falls.
Details here:
http://www.pielframa.net/prodi.asp?ID=412
case
Replies, thank you all for your reply, i think i will go with a leather case, the metal ones are not attractive. The funny thing is that i just sent the phone back today, now it is gone, and as i got home, i got the unlock code from t-mobile UK!!!. DAMN!! I think i just have a bad luck week.
You can get cheap leather case with all sort of design off Ebay. I got mine from there and the quality is not bad at all
Piel Frama does NOT have a belt clip.
UD.
P.S. Some reviews:
Piel Frama leather case
http://pocketpcdubai.com/i-mate_pielframa/jasjar/review.html
Brando Metal Case
http://pocketpcdubai.com/reviews/brando/metalcases/jasjar/review.html
Proporta Alu-leather case
http://pocketpcdubai.com/reviews/Proporta/cases/jasjar/review.html
@universaldoc
check the link, I posted. I speak about a different Pielframe case. And this one HAS A BELT CLIP.
@BlackICE,
My bad! Thank for you for the correction. I thought you were referring to the standard case.
UD.
Just as an observation, the reason the screen would crack in your pocket would be something sharp hitting it? Could this not be easily solved by always making sure that the side of the HTC with the screen on it always faces towards your leg and not towards the outside? Sounds like an easier option than buying a metal case anyway :?
i usually keep my xda exec in my front pocket ... i'm not really a fan of cases esp. for the htc universals .... somewhat tacky ...
HTC
I had 15 cents in my pocket when it happened but i doubt that had anything to do with, it may have but with the way the coins were, i don't think so. I think maybe cause my knees bent, it stretched my trousers and that caused it (can't stop thinking about that day, ::sob::sob:.
With my MDA3, i always used the case that came with it, i like that, cause the case only holds the device. Thanks for your advice, :wink: i just ordered that ALU-Leather yesterday, but i am thinking it will be uncomfortable answering the phone with that leather all around it. I will see how it works out when it gets here but protection is number one now, i can't keep shipping it back to the UK. To people with cases that house the unit, do you answer the phone with the leather all around the unit or u use bluetooth, or you take it out of the case?
I am thinking of getting a case to protect my Kaiser...
What do you guys think of this HTC Kaiser Body Guardz:
http://www.thepocketsolution.com/PSI-42272.html
I know it is transparent, but it is not clear if it will protect it from falls, etc...I doubt it...
/MN
weird ...
every other variations of the Kaiser ( TYTN II/8925/TILT/Vario III )is out of stock except for the "TILT" is available for ordering ...
http://www.thepocketsolution.com/PSI-42589.html
must be vendor error or NOT YET AVAILABLE ( should all be same ... except for the single camera model ) ... I would email & ask ... I think this is just website putting it up way before the device came out ... ( roughly within the last 2 weeks, if you covering all the variations coming to be reality. )
curious ... on one of the demo video ... they had the iPhone protected right over that touchscreen ... I got to thinking ...
if their measurement are top notch ... hopefully the one for the Kaiser does the covering for the screen too !!
we can skip the screen protector altogether ( its thickness replacing the screen protector's thickness ) ... LOL
those thing dries to an invisible result !! COOL stuffs ... I'll be ordering one for sure .. plus I'll get a cool case as well. ( because the guardz is mainly for nick & scratches ... not dropping.
The bodyguardz is because my Kaiser deserved the spoiling ... hahahah
this is weird indeed... I just checked a moment - it doesn't update the stock status until you get into the cart...I will shoot them an email?
what non-magnetic flip case would you recommend?
rgds, MN
I like that the back of the Kaiser is "slightly rubberized" it keeps it from slipping around like the old Hermes did. Does this cover feel the same way? I probably wouldn't go for it either way, but, if it is slippery, it takes away a nice feature IMO.
liking the look of the bodyguard thingey! is it tough/ - ie drop proof?
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
i've been watching that site for 3 weeks now waiting for them to get the skins in stock. well, my order went through without a problem
give us a feedback when u get it dude
traveling on business all week, but will follow up when i return next weekend.
jgermuga said:
I put something like this on my wife's iPhone and it works great. Well worth the investment and it really cuts down on the fingerprint smudges (the iPhone is flat out impossible to keep smudge free). I used this skin and bought one of the thin ruberized cases, and my 14 month old daughter has knocked it off tables on several occassions with not a scatch or even a blip of the screen. I have to admit for all it's lack of features, that thing is TOUGH and makes a great device for my wife. I also like the peace of mind that the thing can get thrown around her purse to her hearts content right beside that massive key ring and all I have to do is peel that thing off and it will look like new.
I wonder how well it would suit the Kaiser though since it has more moving parts. On the two occasions my daughter has knocked my 8125 off the coffee table, I have cringed. No damage, but on one occasion the battery door got knocked off, thus forcing a soft reset. Even with one of these covers, I am thinking the sliding keyboard and pop off battery cover will make it more prone to injury, even when it is in a decent case.
Bottom line, I'll be making sure my Kaiser is out of reach!!
Click to expand...
Click to collapse
As i've mentioned earlier about the iPhone howto video ...
Could you tell me how good the touch sensitive screen reponses when it have the "bodyguardz" covered ??
note: ... only certain kit(s) goes this way of "covering the whole screen" ... if it works well ... I hope the TyTN II kit do the same ...
thickness is similar to a screen protection I guess ... there's one video for the MACBOOK and it does the "covering of the mouse's touchpad" as well ... so I guess it works really well then.
YOUTUBE howto vids ... all sorts
http://www.youtube.com/results?search_query=bodyguardz&search=Search
~~~
ok guys (and any girls) i just applied the BodyGuardz to my Kaiser and took a few pics before hitting the road... I've included 10 pics in the attached zip file. they're not the best pics, but hopefully they give you some perspective on fit, look, etc. keep in mind that it takes 24 hours for the bubbles to disappear. the pics were taken about 3 hours after application so you'll see some bubbles here and there. by the way, you get 2 sets of skins and 3 screen protectors with the kit. each set includes a skin for the left and right sides, one for the top, one for the back and one for the front. the left side skin also covers the bottom of the phone. so far I'm pleased. i like the somewhat tacky-feel and now i know my phone will be protected from scratches when in my pocket. overall this is a pretty good value.
InvisibleSHIELD
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Park City said:
Would anyone else be likely to purchase a screen and phone body protective case from ShieldZone if they have one available?
I have used these on many of my gadgets and they are the best around (IMHO)
I just emailed them to see if one is in the works and will post back with their reply when I recieve it.
Click to expand...
Click to collapse
I too think they make the best protection for our devices. I've used them on my previous Wizard and Hermes and loved them. The problem I see with putting them on the Kaiser/Tilt is that there's really not much real estate to cover. There's the screen (of course), but that's about it. I personally wouldn't want to cover the back because I like the grip I can get from it. The sides are "ridged", and can't be covered. And the rest of the face is just too small to cover.
But they're really good about making custom shields if you bring in your device to them and it's only like $10 more than their usual charge. But once they make a template, no more custom build fees.
I bought the invisibleshield for my 8125 many years ago. It was a big waste of money. I hated it.
i too had reservations about using a "skin" to protect my Kaiser. i just recently applied the BodyGuardz to my device and as of know, i think i'll continue to use them. this is a link to some pictures (some good, some not so good) in case anyone's interested to see how it turn out.
i had this for my wizard. I love how friendly customer service was. If for some reason, you screw up your cover, which is pretty hard to do, then you can ask them to ship you another one paying for shipping as long as you register.
Only complaint is that it's a little too thick. Didn't feel good with the stylus. But at least I was confident that my screen wasn't going to get damaged.
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
little_rock said:
bloody hell i can hardly see it!
it looks so thin!
are you sure it will protect it?
Click to expand...
Click to collapse
yes, it's thin and it covers a significant portion of the device. durability is good at the moment...time will tell how well it protects the device.
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Corinna said:
Does anyone now if there will be any traces left when you remove the "bodyguardz"?
Click to expand...
Click to collapse
I am pretty sure it will unless it covers 100% of the back. I kept my protection film on the battery cover for 2 days of use, when i took it off, there was a very noticeable trace from where it was.
http://www.clear-coat.com/product.php?productid=475&cat=0&page=1
im a bit skeptic about this product, have anyone tried previous products by clear coat?
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
WDawn said:
Found a review of it here : http://www.intomobile.com/2008/06/23/clear-coat-full-body-scratch-protection-for-iphone.html
Click to expand...
Click to collapse
to be honest, when i cant find any other reviews... then suddenly theres a really positive review, that makes me really skeptical...
and yes, it is this EXACT same review makes me skeptical about this product lol
Sounds like
http://www.lowes.com/lowes/lkn?action=productDetail&productId=88113-74130-PFW486&lpage=none
That's the stuff I used in my bathroom to frost my windows... I got it wet and slid it on.. used a squeegee and flattened it all out and 3 years later is is still sticking there.
The difference is that this is
1.) Clear
2.) Cut into the proper shape (you could do this yourself with some measuring but it saves hassle)
3.) the squeegee is probably smaller.
My bathroom windows are in a VERY humid environment... I have never had ANY peeling.
However I don't keep my bathroom windows in my pocket... so I don't know if the corners will peel up.
My main point is that for $24 of this "film" to cover a TINY phone... you can buy the same thing for $18 that would cover 10 phones... if the product works fantastic... the profit margin for them is HUGE. If it doesn't work... it's the biggest rip off ever.
See if Gila makes a clear one... get $18 worth and tinker away.
http://forum.xda-developers.com/showthread.php?t=425314
So it's good or not ? Anyone use one of these ?
asolano895 said:
So it's good or not ? Anyone use one of these ?
Click to expand...
Click to collapse
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Black93300ZX said:
I've seen them used on iPhones, hard to put on but once it's on, it stays.
Click to expand...
Click to collapse
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
venelar said:
Since you've had the Fuze already... Is the shape exactly the same as the TP? It looks like sprints version is a little more round along the corners. I'd Like to go ahead and purchase one of these for the Fuze but don't want to have to send it back.
Click to expand...
Click to collapse
The only difference I noticed when seeing the 2 up next to each other was the shape of the speaker hole on the back, that might be enough to throw the protection off. Ask Raspster about it more, he had both the European and the Fuze at the same time, so he could tell you better than I could.
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
just got mine on Friday exactly as it's described, protects almost every part of the phone with their cut out plastic shield, however as mentioned in earlier post... doesn't really cover the edges, all in all... does really stick and so far looks pretty ok with the exception of little bubbles within the shield (poor application technique)
marcel808 said:
I got one, just to try it out.
Exactly as described above. Its a bit fiddly getting on but once on, it sticks very well.
Its great at sticking to flat surfaces, not so good on curves. And they don't even try and cover the corners on the device, which I would think are the places I'd want protected if I was to drop it.
The texture makes the back look very different from normal; its much nicer without the cover on. On the front, you can't really see the cover at all; edges are perfectly aligned with the phones edges.
The back and the front of the phone are covered very well. Sides not so great. Corners not at all. Front looks good. Back looks crap.
My opinion, its no way worth $24
Click to expand...
Click to collapse
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Proghtc said:
http://forum.xda-developers.com/showthread.php?t=425314
Click to expand...
Click to collapse
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
I would also like to know this. Can it be removed again without leaving marks on the phone?
How scratch proof is it really?
Because of the lack of info on the site (still no video's on how to apply the thing, their forum is just about empty and they don't reply to customer questions...) they really don't seem to thrustworthy ...
DicE
serphinox said:
Hi Marcel808,
Is it easy to peel it off without tearing the phone's original casing? Especially the back cover. I just ordered mine, hope it arrives soon.
Click to expand...
Click to collapse
mrrogers1 said:
I have used the Zagg's products (formerly Invisible Shield) on my 6800, 6700, wifes Centro and even custom ordered for my Pioneer 6800DVD in my car. I really like the product, the service is second to none... That said, I think since I have used the product and know how it performs in pockets, and how to install correctly (installed dozens of shields for myself, family and friends), I may try this new product.
Screen protection has always been great and flat surfaces (side) great as well but the corners usually give way, slide and start to bubble after about 4 months of heavy in and out of the pocket use.
This is a $24 experiment begging to happen.... now if Sprint would just release the damn phone!
Click to expand...
Click to collapse
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
yes it can easily be removed without any mark left at all....I found the cover started to collect dusk a lot (it must be slightly sticky) so I removed it.
Phantisy said:
I would get the one released by Zagg. They offer a lifetime replacement on all products and they will replace it no questions I know. Their stuff is nearly impossible to scratch and I TRIED just about everything to scratch it. All phones full covers are $25. Never had any bubbling issues with Zagg's products.
Click to expand...
Click to collapse
Trust me, I know oh too well the replacement process and have replaced and installed many over the last 5 years.
The fact that I know the Zagg product so well, makes the experiment more interesting. I know the Zagg stuff so well that I will know if this Clear Coat stands a chance AND since it's only $25... It might turn out to be junk, the company could not stand behind the guarantee BUT we'll see.
*Update
Just got my phone yesterday and I just ordered the Clear Coat. I'll install and do a little initial write up. I'll order the Zagg shield when it becomes available and do a comparison.
It's only money and it IS a $700 device.... (but I only paid $250 for it)
Stay tuned guys.
**Update
Just ordered a Zagg full body shield at 40% off as they just got them and were doing a Halloween special I guess. I should have the Cleat Coat on Mon/Tues and the Zagg will probably be here the week after. I think I'll install the Clear Coat first, use it for a week or so and then install the Zagg and do the same.
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
waaz1d said:
Can anyone who has purchased tell me if there is a cutout for the speaker on the front? Tah!
Click to expand...
Click to collapse
I don't have mine yet but why on earth would there NOT be a cutout for the earpiece???
I am a pretty big perfectionist when it comes to cases. I want something that doesn't add steps to the process of using the phone, and something that is durable as well.
I've been through the hard cover cases and found that they look terrible after a few dings. I also found that on most hard cover cases there is a certain point of weakness where the frame is smaller to compensate for port access, which led my case to crack.
Anyways, I just ordered the O24550LCST1BK from CarryMobile.
Google search O24550LCST1BK and click the first link to see it.
When will I have my url restrictions lifted? I've been a registered user for a bit now...
From the pictures it's just what I was looking for. It isn't blocky or otherwise ugly. I really like the rugged appearance and the metal hook on the back for misc usage!
The only downside is that it doesn't have a way to use the keyboard (thats another model that they offer though). I use mostly touch friendly apps anyways so I won't notice it.
When it arrives I will let you know what I think!
Is this the one you meant?
http://www.carrymobile.ru/all_HTC_HTC+Kaiser_HTC+TyTn+II+Sleeve+Type+Black.html
Doesn't seem very svelte. And having to take it off to use the keyboard is a big negative for me.
The O24550LCBSPBK-4550 may be more along the lines of something you would be interested in. I'm debating changing my order for that one and just removing the front cover flap.
Thx but all these cases are a waste of time and money. Just don't throw your phone on the floor and it stays fine. It's all common sense really. If you drop it, well that's your fault isn't it. Take care of your phone and it will last for years.
stuntdouble said:
Thx but all these cases are a waste of time and money. Just don't throw your phone on the floor and it stays fine. It's all common sense really. If you drop it, well that's your fault isn't it. Take care of your phone and it will last for years.
Click to expand...
Click to collapse
I can agree with your point of not dropping it being the number 1 way to make a phone last, but in my situation I need a case for both the protection and belt clip usage. I am normally pretty good about taking care of my phone, but I've had a few run ins with people bumping into me.
I know I am perfectly capable of taking care of my phone, but it's the other 'crazy drivers' im worried about. I'd think differently if I hadnt already had to replaced most of the internal components of my phone XD
I use Seidio hard case with local branded leather pouch (vertical, with flap magnetic cover). Pretty handy. Tried not dropping the phone, it's now 3 times already. All due to my own absent mindedness.
However, the Seidio holds up well, it hasn't cracked or anything. Phone working fine still ..
I had PDAir Aluminium on my SE M600 previously, but given Kaiser's bulk & weight, I decided going lighter. Besides I read somewhere the aluminium reduces signal quality (on M600 doesn't matter, not doing any Wifi - it doesn't have one but it matters for Kaiser, both GPS and Wifi)
Its similar to the case I had by SENA for my HTC 8525/HERMES. The only difference it had a flap the covered the entire screen/keyboard and did fully protect the phone. The only problem was you had to remove the phone for the keyboard. Generally didn't use the keyboard so it was perfect. Unfortunately SENA doesn't make one for the KAISER otherwise I'd buy it. Did protect the phone fully.
stim141 said:
Its similar to the case I had by SENA for my HTC 8525/HERMES. The only difference it had a flap the covered the entire screen/keyboard and did fully protect the phone. The only problem was you had to remove the phone for the keyboard. Generally didn't use the keyboard so it was perfect. Unfortunately SENA doesn't make one for the KAISER otherwise I'd buy it. Did protect the phone fully.
Click to expand...
Click to collapse
did you look at the O24550LCBSPBK-4550 model? Sounds like what you describe, except you can open it up and the keyboard keys are protected by a plastic layer. I finally broke down and got this case, so I am just waiting on it to arrive from hong kong now
Hello everyone.
I got my HD2 a couple of weeks ago and as usual with new toys, am still taking some extra care with it. I had a Touch HD before that withstood quite a few bumps and two small drops. I saw people carying iPhones in pants pockets, back and front. Given that HD2 screen is significantly larger, how fragile is it, really? I usually carry my phones in jacket pocket, screen towards the body, without any case or sleeve. Do I need to take so much care for it or is it actually more resilient than it seems? Yes, I've seen the threads with broken screens. Anything can break, given enough force.
Any serious feedback is welcomed. Thanks.
Cheers, R
Well I have had mine since it was released in the UK and have had it in my right hand side front pocket in my jeans/trousers etc, sat on floors etc and all sorts and nothing has ever happened to it at all. Its a pretty tough screen I think, as long as when its in you pocket its not at an odd angle, I cant see any problems keeping it in there. I certainly have no problems.
Scratch test
There is a YouTube video of a scratch test of the screen of an HD2, its in foreign but gives a good idea of its screen tolerances (those of a nervous disposition may wish to look away towards the end)
http://www.youtube.com/watch?v=NcEaehKWr2s
Hmm I can only speak for myself and my HD2... but my screen has 2 (really small) scratches..
I think these are from a keychain or maybe a lighter in my pocket. I don't really know where the came from - but not from dropping it.
I would recommend to use a (thin - not that thick vikuti) foil to protect it against scratches.
--> Question: What would you recomment regarding a foil to cover the screen? I bought 1 Vikuti foil and really disliked it - it is sooo thick
Edit: I think the knife in the video would be able to scratch the screen... only a matter of right angle an pressure
I dropped mine on new years eve - drunk and the only thing i noticed the following day was that i had lost the backplate lol
Someone on here very kindly gave me a replacement.
Other than that - no scratches so far
Had mine three weeks, using front trouser pocket though I am very conscious of checking the pocket for keys etc first.
I have a full body invisibleSHIELD skin, and i'm extremely happy with it.
I've knocked it a few times on the edge of tables and chairs, once on the metal hand grip on a bus seat, and theres not a mark on it anywhere.
I have a screen protector that covers the entire screen, and carry the phone in my pants pocket in the leather case that came with the phone (I'm waiting on a holster from eBay).
The screen is in perfect condition, however, I did scuff the corner of the HD2 by dropping it (in its leather case) as I went to put it in my pocket coming out of a movie theatre...dropped onto cement.
: /
I use a screen protector and have a very nice silicone case for it that fits very snug, but I'm just being careful.
I believe that common sense is enough to keep this device from being damaged. As you can see from the linked video above, the screen is very resiliant, but it's not scratchproof. Also, why on earth anyone would put it in the back pocket of their trousers and sit down is totally beyone me, but people have done it (and probably still do), but they end up on here asking how to fix their damaged screen. (My advice to them is to hook up a flex capacitor to their car, drive at 88mph, go back in time to before they broke it and slap themselves round the face and say "STOP BEING SILLY!!!")
It's tough, but not unbreakable. Just treat it with respect, look after it sensibly, and DO NOT PUT IT IN YOUR BACK TROUSER POCKET OR FRONT SHIRT POCKET!!!
As the meerkats say... simples
(I hate those adverts, but I do like Back To The Future )
johncmolyneux said:
FRONT SHIRT POCKET!!!
Click to expand...
Click to collapse
Why not...I put it in there all the time?
So it won't fall out or...?
Spike15 said:
Why not...I put it in there all the time?
So it won't fall out or...?
Click to expand...
Click to collapse
lol - I've NEVER seen anyone on this forum say that that has happened to them <sarc mark>
johncmolyneux said:
lol - I've NEVER seen anyone on this forum say that that has happened to them <sarc mark>
Click to expand...
Click to collapse
Just making sure I wasn't missing something.
Personally I don't bend over when I need to get something on the floor et cetera...I bend my knees...I've heard that bending like that is bad for your back.
Spike15 said:
Just making sure I wasn't missing something.
Personally I don't bend over when I need to get something on the floor et cetera...I bend my knees...I've heard that bending like that is bad for your back.
Click to expand...
Click to collapse
Yes, and even moreso if you have a hernia! Good to see that xda is also responsible for good health advice too
I can't wait for mine to arrive next week. I can tell you from experience that the IPHONE has cracked 3 times in pocket when I put too much pressure. Apple does replace them on a regular basis. They allow for what they call a hairline. If it spiders they won't replace it but a hairline is within their tolerance and is common enough for them to replace it without question. That is how I ended up with a new replacement recently. I wasn't using the phone much but my HD battery died on site so I put the time into the IPHONE to use it. I squatted with the IPHONE in backpocket and CRACK. I probably should check my beltline while I am at it..
They replaced it and that worked out anyways as I am going to sell it. Keep my HD and Bold as backup.
The glass looks pretty solid and as many people reported it a good solid piece of hardware.
i keep mine in the case it comes with when i am carrying it around... any pocket really.
i just make sure i dont sit on it! lol
the screen itself is extremely resilient when it is out and in use.
I leave mine lying around all of the time out of the case and it still looks brand new.
I dont use any screen protector.
screen strength
being a kapasitive screen it uses a propper glass cover instead of ****ty plexi glass or resistive glass as most phones use, this naturally gives it a more scratch proof serface but makes it less resilient to actually breaking. like one guy said it all has to do with angle and preshure.. and abit of bad luck when it comes to screen protection i recomend invisiShield. they are nice and thin, VERY clear plastic so it doesnt disturb teh screen quality. and last but not least, the fabric its made of is teh same as teh stuff that they use to cover helicopter rotor blades with, so it comes with a 30 year waranty.
Thanks for all the replies so far. I suspected as much, but it sure is nice to hear other people's experience
Cheers, R
Impunitus said:
Thanks for all the replies so far. I suspected as much, but it sure is nice to hear other people's experience
Cheers, R
Click to expand...
Click to collapse
I had the same fear with its screen .. i posted a poll on the screen
see this
http://forum.xda-developers.com/showthread.php?t=618978