Related
IPL 4.10.0002
SPL 4.10.000
trying to flash a few different roms by either sd or uspl and nothing works...
Currently have a Microlab rom on here and none of my other roms (except the Tmo official rom) will load. sd method says it an invalid file and i get "error 240 file open" error when trying to flash Aserg's 6.1 lite Herald rom. I've flashed hundreds of times and now i get no results... any clues?
kristopherson said:
IPL 4.10.0002
SPL 4.10.000
trying to flash a few different roms by either sd or uspl and nothing works...
Currently have a Microlab rom on here and none of my other roms (except the Tmo official rom) will load. sd method says it an invalid file and i get "error 240 file open" error when trying to flash Aserg's 6.1 lite Herald rom. I've flashed hundreds of times and now i get no results... any clues?
Click to expand...
Click to collapse
Have you Hard Spl'd?
yes sir i sure have.
If hardspl'ed, you should be able to just flash it using flash center or the sd card. Tell me EXACTLY the steps that you're taking. Besides, that SPL isn't a hardspl SPL.
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse
mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?
I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...
chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?
Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed
chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000
samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.
ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.
Dear All,
I decided to add the miri custom ROM. I'm on official 1.66 rom WWE with radio 2.06. I read in this forum that I have to downgrade to 1.48 in order ro be able to SPL. I downloaded the 1.48 from the thread of Leo official roms in this forum. The process stopped at 1% telling me "Invalid vendor". then I restarted my device but the GSM network is not working.
Please help how could I go back to 1.48 to SPL my device.
i want to hard spl but my spl is 1.66.0000
how to hard spl ??
You need the ROM that originally came with your HD2, flash it using the SD card method and then you can put HSPL on the device
EddyOS said:
You need the ROM that originally came with your HD2, flash it using the SD card method and then you can put HSPL on the device
Click to expand...
Click to collapse
That will only help if the original spl on the stock rom is 1.42.0000, which with a 1.66 based rom I'm guessing not. HSPL currently only works if the spl is 1.42.0000 and in cases where it isn't you need to either upgade or downgrade to 1.42 first.
i can not flash by memory card but i have error vender id
in goldcard i have problem too, this is vender id error
is any hspl for spl 1.66.0000 ? ?
Edit !!
i can update my rom to energy by sspl but it still in HTC bootscreen
i need hard spl
please help
(
helppppppppp
Who is your provider? you need the 1.48 ROM from your provider to flash back to SPL 1.42 via SD card. If your phone isn't vendor locked (although it sounds like it is) then you can get the 1.48 ROM for your region from HTC direct
Might be a lesson to be learned here to read everything fully before attempting anything
i have 1.48 rom and test SD card method but i have vender id error
Try another one of these 1.48 roms to see if perhaps any one of them work
http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
As has been stated by EddyOS you can't always just flash to any stock 1.48 rom, you need to try to get a 1.48 based rom for your operator and that is why you are getting the invalid vendor problem. I luckily did not have a problem and I see some other users are saying that the Goldcard method also no longer works. I can't comment on that, but you may want to try that option out.
a question
for ugprade to 1.66 i need goldcard ?
because gold card is worked by active sync but my device in still in htc boot screen
You need to get a 1.48 ROM for your region/vendor and flash using the sd card method, nothing else will get you back to SPL 1.42 so don't bother trying.
If you don't understand then you shouldn't have flashed in the first place
ok. i tested 1.48 and 1.61 rom by sd method but see Not Allowed error.
i will download 1.66 and test it
thanks a lot
Are you getting the 1.48 ROM that is from your region/vendor?
lovely_az_2003 said:
ok. i tested 1.48 and 1.61 rom by sd method but see Not Allowed error.
i will download 1.66 and test it
thanks a lot
Click to expand...
Click to collapse
seems you are just flashing any old rom. You need to find one that is specific to your provider (voafone, o2, tmobile, whatever) otherwise you will continue to get invalid vendor.
i live in iran
i dont know my vendor
i upgrade another leo by this 1.61 rom but this device ...
i unlucky...
Hi all,
i just get an HD2 from someone to put android on it.
So it was locked from vodafone.
So i tried to downgraded it.
It sucesffully downgraded and when i rebooted it was stuck at the white HTC Screen, no red letters..
So i getted into the tri colour bootloader and i got spl 1.66. so i id HSPL and i now got 1.66 HSPl, tried 2.08 HSPL too..
So now i want to get to the stock 1.48 HTC ROM to get the radio etc.. BUT now it is stuck at 9% and the RUU says that it cant complete the command.. now when i want to flash a new RADIO its stuck at 100% and shows a white triangle next to the 100%..
Now when i want to flash a stock ROM thrue the SD card, it will start but at the Radio_V2 thingy, it says: RSA Failed. Update failed terminated.
So now shortly: i cannot flash a stock rom thrue SD because it gives and RSA error at radio_v2..
I can flash a custom rom but it wont boot (stuck at white screen and no redletters)
Task 29 didnt helped..
stock rom thrue RUU gives an command error..
So am i now bricked for ever??? :S
so i cant flash a new radio.. i did many many researches but couldnt find any usefull information.
I beg you PLEASE PLEASE someone help me!!
THANKS!!
Ok what is the intior number of the ROM? Aand I do appologize greatly but I do not recognize the flag of your country, again sorry I mean no disrespect. So what is your country?
Edit: If you donwloaded the ROM from the HTC site, did you type in your serial number to comfirm that the ROM is for the HD2 you have?
T-Macgnolia said:
Ok what is the intior number of the ROM? Aand I do appologize greatly but I do not recognize the flag of your country, again sorry I mean no disrespect. So what is your country?
Edit: If you donloaded the ROM from the HTC site, did you type in your serial number to comfirm that the ROM is for the HD2 you have?
Click to expand...
Click to collapse
im from holland
And my HD2 is from vodafone, tried all official vodafone roms but all happens the same: stuck at 9% with a white triangle next to it; means cannot radio update to me. And when i try to flash the official thrue SD card. it says Radio_V2 - RSA failed update failed terminated
nickislauw said:
im from holland
And my HD2 is from vodafone, tried all official vodafone roms but all happens the same: stuck at 9% with a white triangle next to it; means cannot radio update to me. And when i try to flash the official thrue SD card. it says Radio_V2 - RSA failed update failed terminated
Click to expand...
Click to collapse
Ok if you live in Holland than you should be trying to flash this ROM Netherlands 1.48.404.2 correct? Also are you positive that HSPL 1.66 is a low enough HSPL to allow the flashing of the ROM. i am currently lookingcto se if I can find the SPLITS that comes with thst ,ROM.
Edit: It looks like the original SPLITS was 1.42 not 1.66.
i already tried to flash that.. also the NLD vodafone ROM but both failed at 9% with white triangle and thrue SD its RSA Failed.. so stock rom flash wont work.. and custom rom will get finished but booting failed because of no radio i think.. so i need to flash radio but i CANT man
nickislauw said:
i already tried to flash that.. also the NLD vodafone ROM but both failed at 9% with white triangle and thrue SD its RSA Failed.. so stock rom flash wont work.. and custom rom will get finished but booting failed because of no radio i think.. so i need to flash radio but i CANT man
Click to expand...
Click to collapse
Ok I edited my last post with this but I will repeat it. I think you need to change your HSPL to 1.42 as this appears to be the original SPL. If the ROM requires that SPL version it will not let the ROM flash. It might also be SPL 1.62. These are the only SPL's below your current 1.66 HSPL. It should not matter if it is HSPL or SPL as long as the numbers are right.
T-Macgnolia said:
Ok I edited my last post with this but I will repeat it. I think you need to change your HSPL to 1.42 as this appears to be the original SPL. If the ROM requires that SPL version it will not let the ROM flash. It might also be SPL 1.62. These are the only SPL's below your current 1.66 HSPL. It should not matter if it is HSPL or SPL as long zr the numbers are right.
Click to expand...
Click to collapse
.... the rom WILL flash.. but i CANT flash a radio.. since it gives me an error.. i can flash a custom rom OK but no radio.. and without radio it cant boot.
So please dont say i need to upgrade or downgrade my HSPL because i cant flash an official rom because the RADIO FLASH will fail
nickislauw said:
.... the rom WILL flash.. but i CANT flash a radio.. since it gives me an error.. i can flash a custom rom OK but no radio.. and without radio it cant boot.
So please dont say i need to upgrade or downgrade my HSPL because i cant flash an official rom because the RADIO FLASH will fail
Click to expand...
Click to collapse
What radio does it show the 1.48.404.2 ROM has with it? The name of the RUU should have it in it. I have a TMOUS HD2 so I can not pull it up on the HTC site cause my serial number is not a match for that ROM.it should be one of these, or somthing close to it.
2.05.51.05
2.06.51.07
2.07.51.05
2.09.51.03
T-Macgnolia said:
What radio does it show the 1.48.404.2 ROM has with it? The name of the RUU should have it in it. I have a TMOUS HD2 so I can not pull it up on the HTC site cause my serial number is not a match for that ROM.it should be one of these, or somthing close to it.
2.05.51.05
2.06.51.07
2.07.51.05
2.09.51.03
Click to expand...
Click to collapse
I dont know what radio it has.. but i cant do that update..
I cant see my radio verion cause the red letters dont show up uppon boot.. so i think i dont even have a radio or its damn corrupted..
nickislauw said:
I dont know what radio it has.. but i cant do that update..
I cant see my radio verion cause the red letters dont show up uppon boot.. so i think i dont even have a radio or its damn corrupted..
Click to expand...
Click to collapse
It should tell you the radio version in the name of the RUU file. Like this "RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship. The bold numbers sre the radio your RUU file for the official ROM should have the radio version in the same place. This is just a T-Mobile ROM I am using for example.
tried these roms with the following radio's:
2.05.51.05_2 --- RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
and
2.15.50.14 -- RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
and
2.07.51.22_2 -- RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
but all failed with RSA failed error...
nickislauw said:
tried these roms with the following radio's:
2.05.51.05_2 --- RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
I don't this one worked because you hsve HSPL 1.66, I think you need either 1.42 or 1.62
and
2.15.50.14 -- RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Click to expand...
Click to collapse
I think this one failed because you need 2.07 or 2.08 HSPL or SPL to flash it.
and
2.07.51.22_2 -- RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
but all failed with RSA failed error...
Click to expand...
Click to collapse
Again I think this one failed because you need 1.42 or1.62 (I think) to flash this one.
Seems to be the same issue I am having with a TMOUS american HD2.
http://forum.xda-developers.com/showthread.php?t=994365
can install a ROM, but not a radio
Boradan said:
Seems to be the same issue I am having with a TMOUS american HD2.
http://forum.xda-developers.com/showthread.php?t=994365
can install a ROM, but not a radio
Click to expand...
Click to collapse
yea man i posted in your thread
And BTW i tried every rom with the 2.08 HSPL too and ALL fails.. stuck at radio flashinggg
T-Macgnolia said:
I don't this one worked because you hsve HSPL 1.66, I think you need either 1.42 or 1.62
I think this one failed because you need 2.08 HSPL or SPL to flash it.
Again I think this one failed because you need 1.62 (I think) to flash this one.
Click to expand...
Click to collapse
all roms work on any spl/hspl, except the 3.14 roms which need 3.03.xxxx
samsamuel said:
all roms work on any spl/hspl, except the 3.14 roms which need 3.03.xxxx
Click to expand...
Click to collapse
oke
But you don know the solution?
No, sorry, seen this a few dozen times over the past year.very few end well. We need a way to get mtty to drop the radio,but no one seems to know.
In what used to be the tmous thread is/ was a "possible solution to unbrick " something sticky thread, which uses a test rom.not sure its relevant but worth having a read.
Also I've seen threads where a sequence of certain test roms broke a lock, but that may have been spl related, and possibly tmous specific.
Good luck. Maybe start hunting for a local phone repair shop with jtag equipment.
samsamuel said:
No, sorry, seen this a few dozen times over the past year.very few end well. We need a way to get mtty to drop the radio,but no one seems to know.
In what used to be the tmous thread is/ was a "possible solution to unbrick " something sticky thread, which uses a test rom.not sure its relevant but worth having a read.
Also I've seen threads where a sequence of certain test roms broke a lock, but that may have been spl related, and possibly tmous specific.
Good luck. Maybe start hunting for a local phone repair shop with jtag equipment.
Click to expand...
Click to collapse
Well this is not my HD2 so ive now got a huge problem..
The guy had warranty.. aww man i feel f*cked
Boradan said:
Seems to be the same issue I am having with a TMOUS american HD2.
http://forum.xda-developers.com/showthread.php?t=994365
can install a ROM, but not a radio
Click to expand...
Click to collapse
nickislauw said:
yea man i posted in your thread
And BTW i tried every rom with the 2.08 HSPL too and ALL fails.. stuck at radio flashinggg
Click to expand...
Click to collapse
Has either one of you tried using the .nbh file of the radio you want to flash to run a task 29? This will flash the radio and run a task 29 at the same time. I suggest this cause both of you say you can succesfully run a task 29.
T-Macgnolia said:
Has either one of you tried using the .nbh file of the radio you want to flash to run a task 29? This will flash the radio and run a task 29 at the same time. I suggest gbis cause both of you say you can succesfully run a task 29.
Click to expand...
Click to collapse
i can do a task 29.. but it didnt worked man look at the op
its described there..
So I was installing a stock rom on my device so I could return it to tmobile, but i think i may have installed the wrong type of rom. Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
T-Macgnolia said:
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
Click to expand...
Click to collapse
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
For the sake of testing... Put hardSPL and try a custom rom to see if it boots
Sent from my HD2 using XDA Windows Phone 7 App
edwards33 said:
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
Click to expand...
Click to collapse
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
Click to expand...
Click to collapse
This happens when you have hspl installed and then flash a 3.14 stock rom over sd card.
Hspl gets removed, replaced by 3.03.0000, the flash tries to continue but cant.
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Try creating a gold card. It will force you through to flashing off the SD card. I also can JTAG this and resolve the problem for you as long as there is not physical nand-failure.
T-Macgnolia said:
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Click to expand...
Click to collapse
OK Tried running the tmobile official update throught the sdcard as well still no luck It just says loading and nothin happens after that.
Also tried installing HSPL but says it can not be flashed
samsamuel said:
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Click to expand...
Click to collapse
the send and end keys are green and red.... the stock rom that gave me the error is ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Also have tried Installing The tmobile update directly from tmobile.com T-Mobile_HD2_MR_Software_3.14.531.1
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Ahh see now that's a shame.
you do have a tmous, but the rom tmo_de IS NOT for your phone.
That's about as close to bricking your phone as you can get without actually bricking it.
that rom is tmo Germany, which means it is for the regular hd2. The ONLY stock roms your phone will accept are tmous stock roms. All other t mo roms from around the world are for regular hd2.
And now you made it worse by flashing a test rom with an spl which is a pain to get rid of.
In the test and stock roms thread where you found that test rom, DO NOT flash the first rom in the list, it will kill your phone.look at the end of the list and there is a version of hspl edited to work with spl 2.00
Give that a try first.
You aren't the first so Google stuck on spl 2.00.1000 and start reading.
DO NOT FLASH ANYTHING TILL YOU ARE 100% SURE OF THE EXPECTED OUTCOME.
You got real lucky, there are countless threads here that go "tmous,non tmous stock rom, phone now utterly dead",,, don't ruin it now by going flash crazy.
edwards33 said:
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Click to expand...
Click to collapse
You need to go to the "Leo 1.5 T-Mobile Test & Stock ROMs" thread anf use the link at the bottom of post one named " HSPL with MFG SPL 2.00 support!". This is suppose to support the SPL version you have and allow you to flash HSPL to your HD2 wich should allow you to flash the official T-Mobile ROM or any custom ROM you want to flash. Good luck
Edit: You beat me to the punch Sam
Also the first stock ROM must have changed your SPL and that must have been why you could not flash the official T-Mobile ROM. Like Sam said you got very lucky, if that first stock ROM would have flashed hou would have had a bricked HD2.
OK well tried using the hspl3 but still get the error saying bad spl so I'm gunna start reading up and hope there's a way to get the stock rom back on the phone. Thanks everyone for all your help its greatly appreciated!!
Sent from my LG-G2X using XDA Premium App
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
samsamuel said:
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
Click to expand...
Click to collapse
Yea it was the one from the stock rom thread I'll read up and learn to use gold card thanks
Sent from my LG-G2X using XDA Premium App