So I was installing a stock rom on my device so I could return it to tmobile, but i think i may have installed the wrong type of rom. Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
T-Macgnolia said:
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
Click to expand...
Click to collapse
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
For the sake of testing... Put hardSPL and try a custom rom to see if it boots
Sent from my HD2 using XDA Windows Phone 7 App
edwards33 said:
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
Click to expand...
Click to collapse
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
Click to expand...
Click to collapse
This happens when you have hspl installed and then flash a 3.14 stock rom over sd card.
Hspl gets removed, replaced by 3.03.0000, the flash tries to continue but cant.
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Try creating a gold card. It will force you through to flashing off the SD card. I also can JTAG this and resolve the problem for you as long as there is not physical nand-failure.
T-Macgnolia said:
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Click to expand...
Click to collapse
OK Tried running the tmobile official update throught the sdcard as well still no luck It just says loading and nothin happens after that.
Also tried installing HSPL but says it can not be flashed
samsamuel said:
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Click to expand...
Click to collapse
the send and end keys are green and red.... the stock rom that gave me the error is ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Also have tried Installing The tmobile update directly from tmobile.com T-Mobile_HD2_MR_Software_3.14.531.1
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Ahh see now that's a shame.
you do have a tmous, but the rom tmo_de IS NOT for your phone.
That's about as close to bricking your phone as you can get without actually bricking it.
that rom is tmo Germany, which means it is for the regular hd2. The ONLY stock roms your phone will accept are tmous stock roms. All other t mo roms from around the world are for regular hd2.
And now you made it worse by flashing a test rom with an spl which is a pain to get rid of.
In the test and stock roms thread where you found that test rom, DO NOT flash the first rom in the list, it will kill your phone.look at the end of the list and there is a version of hspl edited to work with spl 2.00
Give that a try first.
You aren't the first so Google stuck on spl 2.00.1000 and start reading.
DO NOT FLASH ANYTHING TILL YOU ARE 100% SURE OF THE EXPECTED OUTCOME.
You got real lucky, there are countless threads here that go "tmous,non tmous stock rom, phone now utterly dead",,, don't ruin it now by going flash crazy.
edwards33 said:
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Click to expand...
Click to collapse
You need to go to the "Leo 1.5 T-Mobile Test & Stock ROMs" thread anf use the link at the bottom of post one named " HSPL with MFG SPL 2.00 support!". This is suppose to support the SPL version you have and allow you to flash HSPL to your HD2 wich should allow you to flash the official T-Mobile ROM or any custom ROM you want to flash. Good luck
Edit: You beat me to the punch Sam
Also the first stock ROM must have changed your SPL and that must have been why you could not flash the official T-Mobile ROM. Like Sam said you got very lucky, if that first stock ROM would have flashed hou would have had a bricked HD2.
OK well tried using the hspl3 but still get the error saying bad spl so I'm gunna start reading up and hope there's a way to get the stock rom back on the phone. Thanks everyone for all your help its greatly appreciated!!
Sent from my LG-G2X using XDA Premium App
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
samsamuel said:
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
Click to expand...
Click to collapse
Yea it was the one from the stock rom thread I'll read up and learn to use gold card thanks
Sent from my LG-G2X using XDA Premium App
Related
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
or just to HTCs website and get it from there (assuming its not a vendor locked device)
mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?
djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?
zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me
You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.
lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930
lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.
(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.
Well I got my new Leo 13 days ago and I've tried to make the stock ROM work to my satisfaction but between the T-Mo junk installed and terrible battery life I decided it was time to try a cooked ROM...
So I read and read and read some more...It's not my first run at this but I wanted to understand everything so I didn't end up with a $449 paperweight.
This morning I download and installed the HSPL-1024....No problems, went just as the instructions said....
I then download a 1024 T-Mo tested/approved Energy Rom and I install it on my LEO.... No problem everything went as it should. I played with the rom and wanted to try another one with a different look so I found another 1024 LEO Rom, the RoMEoS4 or something like that.... Anyway, that install went just fine...
After installing both cooked ROMS I noticed I was having freezing/locking up issues and had to keep soft reseting so after several hours of it locking up I decided to just revert back to the stock T-Mo USA rom.
I then went on here and found the exact shipped rom I had originally (I had documented the versions I had prior to HSPL and the cooked rom's)
http://beta.vbnfiles.com/index.php?...08.50.08_2_Ship.zip&directory=xmoo/Leo/TMOUS&
Instructions on here clearly explained how to revert back (for warranty purposes) so I downloaded the exact stock rom, extracted it to my desktop and renamed the nbh file leoimg.nbh.... I then copied it to a formatted 8gb SDcard and inserted it into the phone.
Instructions said to hold the Volume down botton and the Power button until it boots into the bootloader and then begins to install off the card. I did this exactly and shortly after it began loading off the card it went back to the bootloader and said "Upgrade Rom Code Error, Please try again" it then goes to a gray screen that says "Loading" and stays there...stuck.
Here's a video of what it does when I try to load off the sdcard.....
http://www.youtube.com/watch?v=eCD_-EuI1_Q
I have no idea what happened or what to do to get it out of this...
Thanks for your time!
Jess
http://i16.photobucket.com/albums/b4/jessepatty/DSC00314.jpg
Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
zarathustrax said:
Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.
Click to expand...
Click to collapse
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%
donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86
If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM
jessepatty said:
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86
Click to expand...
Click to collapse
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.
donalgodon said:
If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM
Click to expand...
Click to collapse
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
jessepatty said:
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%
Click to expand...
Click to collapse
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.
Before flashing any rom I would do task29 and completely wipe the internal memory, so you don't have any issues with left over files from the last rom. That is most likely why you started having problems in the first place. I used to think oh I can just flash a rom and it will work like new, but nope I had more problems I could deal with and almost returned the damn thing. Once you know what you are doing WM is a great OS to have and the only other phone I thought even cam eclose toa WM phone was the iPhone anyG, if i'm allowed to say that here. So, task29 first then enter bootloader and the run your customruu with any rom compatible with the TMOUS HD2 1024. Any questions just holla.
jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.
jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
I wouldn't give up hope, but.... Worst case: You don't have HSPL installed, so your warranty is still good! Not the best news, I realize.
donalgodon said:
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.
Click to expand...
Click to collapse
Yeah that's what I used to put the HSPL in it. It's giving me the Critical error now.
I'll search a copy of MTTY and see if it does anything...I don't have a copy of mtty.
zarathustrax said:
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.
Click to expand...
Click to collapse
Thank you, Yes I took it out when it wouldnt load the stock rom off it.
There is no SIM or SD card in it.
No, it's not installing via my computer.....It's still sitting at 0% and been there since I began typing this thread... (30 mins) I thought I may have gotten a bad download so I've re-downloaded the stock rom twice now and still the same thing.... Sits at zero percent.
zarathustrax said:
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.
Click to expand...
Click to collapse
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.
If you can get your phone into bootloader then just do task29. Here is the Mega link.
http://www.megaupload.com/?d=J3OELQ8I
Once task29 is done, pull your battery out and replace after 10-15 secs. Then enter bootloader again and try the stock or custom rom you want. I have been at the 0% screen before even 70% and 99% and stuck. Mine is the HTC HD2 TMOUS branded and I am currently using the AxLor Leo V9 rom and she works like a dream. Let me know if you need help.
jessepatty said:
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
Click to expand...
Click to collapse
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?
jessepatty said:
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.
Click to expand...
Click to collapse
ahh ok, that IS the stock rom, but its a repack of the 2.1 rom, not an official .exe/nbh pack. (Well, my kitchen wont import it, says its not official, and it comes with customruu)
However, look for
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
which is the packed ship .exe. (and does open as official in the kitchen)
ill submit this, and see if i can find the link.
EDIT - heres a mirror of
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
http://forum.xda-developers.com/showpost.php?p=5688401&postcount=159
good luck
samsamuel said:
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?
Click to expand...
Click to collapse
I am glad you pointed out this error on my part. I honestly did not know that HSPL2 and HSPL1024 were 2 different programs....
I was merely referring to HSPL1024 as the second version of HSPL....or HSPL2..... I didn't mean to create confusion... sorry about that...
To confirm I am using HSPL-1024
Jess
donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
so I'm kinda confused...you say that that you shouldn't flash from the sd card. and im sure you know more about this technically speaking than I do but what confuses me is I've been told and read MANY times by people probably more experience than both of us that flashing from your sd card IS the safest way to flash...im not saying your wrong but it concerns me because that is the method I use mainly for convience.but if this has the potential to destroy my very expensive device that I can't afford to replace I would REALLY like to know and know why. if anybody can guide me here why two different stories and maybe some reasons why one method had a higher chance for problems I would really appreciate it =)
hi,
a little fusrated here, Ive been trying to get my hd2 (originaly purchased from vodaphone in greece) to boot into windows.
i have tried flashing all diffrent ROMS with including, with HSPL installed (all versions from HSPL2):
from SD: original greek ROM from htc site, successful once but still no boot
usb: original WWE rom and UK vodaphone updated rom (1.77), also several cooked roms with radio version 2.08.50.05 and TASK29 flashed before attempting.
Even after several successful flashes from HTC offical ROM (which include radios if im not mistaken) the phone still doesnt boot, white htv screen or silver warning sign on black backround appear.
am i making a total noob mistake here, i have in my mind followed every combination of HSPL number, radio, HTC offical ROMS and even the HTC_ELL (greek rom) from SD. the only one i havent managed to find is the vodaphone GREEK rom from vodaphone.gr
any help at all would be excellent, its been a week of sleepless nights here, i really lossing hope.
this is hell! please help.
Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip
hi, thanks for fast response. no i have not tried using the goldcard. i havent been able to figure that one out exactly where i download it
ok, im trying that rom now with hspl 1.66 xe
im at work now and think ive got XP usb driver issues from here (win7 from home works fine), although hspl flash works ROM flashing stays at 0%
any ideas about usb drivers? (active sync not installed)
302 error, got to 7%. do you think usb error.
djgknight said:
302 error, got to 7%. do you think usb error.
Click to expand...
Click to collapse
Is that the rom I gave you?
7/9% is most of the times CID Lock or the Radio.
Have you tried flashing stock rom trough SD-Card??
hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.
djgknight said:
hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.
Click to expand...
Click to collapse
Well urs has a Vodafone CID lock.
So flash the stock Vodafone ELL rom using sd-card, or flash HTC ELL using goldcard!
i though that there was no need to CID unlock if you have a version of HSPL on your device, i never even though of that.
I still cannot locate the the offical vodaphone ELL ROM (which i dont really want as it is in greek).
back to the start i suppose ?
Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!
xmoo said:
Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!
Click to expand...
Click to collapse
ahh, like the sound of that. it seems to make sense. ill do that now and get back to you. thanks muchly for the help btw.
/djgknight
xmoo said:
Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip
Click to expand...
Click to collapse
i've had no luck with flashing the stock ROM with SD, none of the HSPL2 versions will load from SD anymore (just a double flash of the screen).
i did try now to flash the ROM you gave me today (above) and get that rom's splash screen "not for sale" appear but still no boot.
should i try a task29 again? what to do if wont even boot leoimg from SD ??
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
you will brick your T-Mobile HD2 with this ROM. this is not a compatible ROM for the T-Mobile HD2.
see if this will help you
http://forum.xda-developers.com/showthread.php?t=668347
friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
samsamuel said:
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
Click to expand...
Click to collapse
It's not that its about luck is about reading which ROM is compatible.
Sorry about your brick.
Kenichi
Thats why its always important to read the stickies and the 'for noobs' postings before flashing. They stress it so many times but yet there's always someone who just doesnt read. Or if they do read they dont understand and flash anyway.
Preaching wont help you any now.
Try contacting HTC and see what they say.
Kenchi* said:
It's not that its about luck is about reading which ROM is compatible.
Kenichi
Click to expand...
Click to collapse
words to live by
Lets cut this guy a small break... based on his relatively poor spelling and grammar i don't think he can even read English. It's amazing how he got it to flash in the first place.....
That was a funny one
no have to do with read english i dont not english and i flash everything and i have android on my hd2
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
icexclusive said:
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
Click to expand...
Click to collapse
if you just flashed a rom, you are fine. Boot into bootloader, and flash a compatible rom. Its only radios that kill the tmous, and most custom roms dont include a radio. Its mainly the non tmous official roms you need to avoid.
so basically thats what ive been doing. i put a nbh file into a sd card and load bootloader. It doesnt seem to do anything. I found on you tube that i have to rename the file to leoimg.nbh?
do i have to do this or do i just throw a compatible nbh file and it should autoload in bootloader. Also is there a way to install 2.13.xxx the lastest tmobile stock rom from bootloader? All the ones i have been able to find are in .exe format and want me to have my device be active synced. I tried putting those on a sd card and flashing like that but i didnt do anything.
the funny thing was i really did try to flash a radio from a leo at first but it did not work after 5 attempts. Then the chucky rom finally did the trick.
Now i cant seem to flash from sd card. I dont think i know the process.
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
damn im trying to install the nibbey rom but it doesnt work. I got it to go to 7% max one time and now its always 0% when i retry. I put the leo_customruu in the same folder as the nibbey nbh. and then start the customruu! is this the correct procedure?
samsamuel said:
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
Click to expand...
Click to collapse
Yes it says hspl not 0000. Also i think my batter is below 50 percent now with no way to charge it. im starting to be believe that might be the reason it stopped at 7 percent and now the more i retry i get 0%.
also i am not able to get a active sync connection anymore with my device stuck in hspl bootloader. So the whole usb rom flash fails every time. Someone help i need my phone tomorrow.
i got it fixed! turns out i needed a 2gb sd card and it worked perfectly to install a custom rom.
I will buy your brick from you dude.
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.