Hi, I have a problem with my Cingular 8125. See my touch sreen is not working and I just flashed my phone. Now I am at the part where it tells me to "Tap the screen to set your Windows Mobile based device." Since my touch sreen is not working, I can not touch it, well I did but it does not work. Is there any other way I can by pass this? Any help is really apprecited, thanks in advance.
why not install wm6 standard rom without (touch screen)
If can provide the link, I would really apprecite it and also I tried flashing the ROM with WM6 but I have Vista. I followed all the steps in how to update ROM with Vista but it doesn't work. Everytime I try to flash the phone, it says "ROMUpdateUtility MFC Application has stopped working" and I can not seem to find any solutions .
PLEASE NOTE!!! SMARTPHONE(Non touchscreen) AND POCKET PC ROMS ARE TWO DIFFERENT THINGS! YOU CANNOT FLASH A SMARTPHONE ROM TO A POCKET PC!
I tried flashing the Cingular 8125 with a WM6 ROM, and that doesn't work. I couldn't find any ROM that has the touch sreen disabled . Is there a WM6 for Cingular 8125 that has the touch sreen disabled? If anyone could help me, I would really apprecite it.
- Thank You...
aiq said:
Hi, I have a problem with my Cingular 8125. See my touch sreen is not working and I just flashed my phone. Now I am at the part where it tells me to "Tap the screen to set your Windows Mobile based device." Since my touch sreen is not working, I can not touch it, well I did but it does not work. Is there any other way I can by pass this? Any help is really apprecited, thanks in advance.
Click to expand...
Click to collapse
If your touch screen doesn't work I don't know how much use the phone will be for you but to get past the spot your in at this stage of your install you can always use a freeware called my mobiler at mymobiler dot com or pocket controller pro from any of the usual places.
Than you for the software information, it really helped but I'm still stuck, I am at the "align screen" part, I keep tapping the target but never works.. .
I just posted this on another forum and then I read this posting. Based on what I read here, the MDA is totally hosed if you cannot use the touch screen?
Well my MDA Touch Screen has finally quit working. My MDA is almost 2 years old. Now I have a problem using the MDA since I am so use to using the Touch Screen. Has anyone tried to use the MDA without the touch screen?
If so, how did you setup your MDA? I cannot even get to the various button menu to reset all my buttons. I have been using SPB PocketPlus, SPB Diary, etc., and now I am at a loss to even get to the Menu Screen. Any suggestions will be appreciated. Thank you in advance.
All I can say is that you can try to change the touch screen or call T-Mobile or HTC to see if they will replace it for you. I just ordered a new touch screen I found on eBay and am waiting until it comes so I can replace it and see what happens. If you are having software problems, I am not sure what problems you are having, you can try to re-flash the MDA with the newest MDA ROM or a ROM on this site...
Hope it helps
I had the exact same problem you had, and I finally came across a solution on a different site.
All you need to do to bypass this is connect your phone to your pc (usb activesync) and browse the contents on your wizard and delete \\\Windows\StartUp\Welcome.ink . Then soft reset your phone and you are past the screen calibration part and continuing the installation
A Little Late
I had the exact same problem you had, and I finally came across a solution on a different site.
All you need to do to bypass this is connect your phone to your pc (usb activesync) and browse the contents on your wizard and delete \\\Windows\StartUp\Welcome.ink . Then soft reset your phone and you are past the screen calibration part and continuing the installation
Can you tell me how to find this file? I've connected my 8125 to my PC, but did a search for the file and it's not found. If I can bypass the screen it would at least be able to be used. I appreciate your help. Also, using My Mobilier doesn't work if you can't tap the screen as I tried it.
My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
amit200465 said:
My Phone's screen suddenly not responding correctly to touch. I press at one place the phone respond erratically. I tried hard reset but I am stuck on Align Screen, it is not moving further even after repeated touch. PLease help.
Thanks
Amit
Click to expand...
Click to collapse
What happened? Did you flash a new rom to your phone? Did you drop it? Did it get any water damage? It sounds like something is wrong (mechanically / electronically)
I DID FLASH MY blackstone to 1.56 just change from german to french
the phone stucks on align
i cant align the screen , impossible to make a hard reset and all the RemoteCalibration doesnt support the blac100
the tric welcome.not doesnt work also
it works well in german now i cant flash it because invalid vendor id
radio 1.13.25.24
G52.62.25.34U
D.1.56.00.00
BLAC100 32 M
SPL-1.54.0000
ANY IDEA HOW TO FIX???
HOW TO EDIT THE REGISTRY VIA EXPLORE THE PHONE VIA ACTIVESYNCRO???
Hi manouba,
please try the following, if possible:
(1) Connect your Phone to your PC using Activesync (it works even when you are stuck at alignment screen).
(2) Download this Remote Screen Alignment program.
(3) Install and run this program from your PC.
(4) Choose SKIP to avoid the Align Screen Wizard. This program has a few features that you might want to use in the future.
(5) Restart the phone and you are done.
Let me know if this works or not.
Note: Incase your screen is badly aligned (if touch screen works); you can start the alignment wizard from settings and do few taps. You will not come out of the loop, so press any key like screen off button, Windows or restart the phone.
Best Regards.
Try using mobile registry editor: http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Mobile-Registry-Editor-10636.shtml
I'm not sure if this is possible. I have a Mogul that has a broken screen, is there a program I can use to display the screen on my computer, so it can be semi-functional for the time being while I wait on my replacement?
Thanks,
Eric
broken screen
hi bro, it's call my mobiler ... i think it's a freewere you just install it via activesync and ur done... i've the same problem
hii
I have htc tytn herm300, with schap's wm6 ver.3.30c on it.So the problem is my screen. When i turn on the phone it's work fine for 1hr, and than my touch is not responding, all other keys work fine.I try with align screen and it start to work, and after few minutes same problem.I try to change rom ver. but the problem is still present, soft and hard reset too didn't give any resolt.I think that the screen is not a problem because i use this screen on my old herm300, but motherboard get bricked so i chang. it with one i use now.
i don't know what to do, so i ask all of you, the reall experts to help me.
I have a Touch2 and a few days ago the touchscreen stopped working.
Now I can't sype anything. I can't run any applications. I can't do anything, in fact. If I touch the screen, nothing happens.
The problem si that I don;t have a backup on my phone so... I should do one before taking it in service.
I tryed to install MyMobiler to control it over PC but... surprise: I can;t install it on my phone because I can't press "Accept" .
What can I do in this case? Is there any sollution to this problem? Is there any other application that installs without asking me anything?
10x!
i have the same problem. can't anybody help?
mrcencen said:
i have the same problem. can't anybody help?
Click to expand...
Click to collapse
hard reset and all this stuff. then try to removed your clear LCD screen protector, did another soft reset
Newton's Ring.
Try search Newton's Ring on forums...you will find usefull information about touchscreens....I had once a problem with my touchscreen and had it replaced. I don't have the time to post links for you about Newton's ring...so try search it...what I know is that not only the Mega has this problem.. Good luck!
Try mymobiler http://mymobiler.com/?cat=4 it's installed via active sync so you can control your phone via pc at least you can backup with dotfread pimbackup.