Hi guys,
I was having a problem getting the auto rotation (g-sensor) to work with SPB Mobile Shell using BsB Tweaks rotation feature.
I was able to put the main screen auto rotating, but everytime I went to another Mobile Shell menu, I would loose the auto rotation. I tried going back to BsB Tweaks and try to enable rotation in the other menus, and although I was able to add rotation to the other menus, I would loose it on the main screen.
I digged a bit in the registry and found out that the problem was since the ModuleName is the same for all the Mobile Shell menus BsB Tweaks would replace the WhiteList Data with the new one.
I tried adding manually 3 different keys for the 3 different menus BsB Tweaks recognized both in ModuleName and WhiteList:
HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName\SpbHomeWindow value "\Program Files\Spb Mobile Shell\MobileShell.exe"
HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName\SpbMainWindow value "\Program Files\Spb Mobile Shell\MobileShell.exe"
HKCU\Software\HTC\HTCSENSOR\GSensor\ModuleName\SPBGIWindow value "\Program Files\Spb Mobile Shell\MobileShell.exe"
HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList\SpbHomeWindow value "SpbNow_HomeWindow"
HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList\SpbMainWindow value "SpbNow_MainWindow"
HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList\SPBGIWindow value "Spb.GIWindow2"
I created a cab that creates this keys automatically.
Cheers
thanks!!!!
harky said:
thanks!!!!
Click to expand...
Click to collapse
I thought nobody needed it after 1 week without replies .
hehehe i also tot no ppl like me d/l it and try it
yeah, thanks!
Its exactly my problem....
i have downloaded your cab. gonna try it right now.
lots of thanks.
sounds great. will try. thanks!
WOW
This is what i wass looking for
Will try it asap
TY
Regards,
Axelman
Works
Hi m8,
This really works. Only it failes after a period of time. Phone freeses and have to soft reset. Will do a trial with this for a fiew days.
Thanks anyway
Superb!
You did nice work with this one!!
Worked- but remember to do a soft reset!
great thx i really needed this =)
THANK YOU so much for this. I don't use bsb to rotate my apps I use auto-rotate-config found in Omarket and this little sweet cab you made added the entries that causes spb mobile shell 3.5 to auto rotate.
Thank you, thank you very much
I was really looking for those entries, and the cab works perfectly, many thanks
Thank you for this. I'll give it a try. I've tried nearly everything else.
Thank you man!
Been using this for a couple of days now and it helps a LOT. There's only been once when it failed to go back to landscape mode, and that was when I went into the camera app and came back out. I reinstalled the cab but didn't even have to reboot, so I think it would have straightened itself out without that eventually.
Great job, and thank you very much!
Related
Hello all,
i m new here but i am watching all p0sts about herald for a long time because i have one also...
Here's my question...is there any program like SPB MOBILE SHELL that can customize your today screen with out pay?? SPB shell is really helpfull but i cant find anywhere a non trial version with out pay:/
my sec0nd question..is there any other program to describe your tasks in your today screen ?? i ve tryed couple of programs but nothing..:/still saying 1 2 3 active tasks..:/
my last question is about loading cyrcle in ppc is there any way to change that???
Thx For your Help :>
Spb Diary come in my mind for your second question, it's not free but in my opinion its worth the money. Another program is called Today Agenda, haven't had my hand on it but I guess others here did.
The HTC Touch Today Screen can be an alternative to Spb Mobile Shell. It can be found either here or in the Wizard subforum. It's somewaht free, but it really slows down you PPC alot and takes away at least half of your screen.
yes but htc touch is for wm6..:/ any 0ther program??
I tried installing the HTC Touch Today screen from the wizard forums but didn't seem to work
I think I saw some registry settings on the same thread but didn't have regedit thingie installed so I'll give it a shot later
analyzerx said:
I tried installing the HTC Touch Today screen from the wizard forums but didn't seem to work
I think I saw some registry settings on the same thread but didn't have regedit thingie installed so I'll give it a shot later
Click to expand...
Click to collapse
What language does your OS have.
I had to change the .mui files into 0407 for my german Terra.
And for registrysettings - use totalcommander. The best filemanager and FREE - and it has regedit, ftp, and lan service.
Good luck
As papamopps said, you just have to "localize" the plugin. It is only one .mui.0409 file you need to rename. If you use a good file explorer like TotalCommander you will be able to find and rename the file. I guess you are not using an English device so you should find that particular file easily in the Windows folder. After that uncheck and check the plug in from the settings menu.
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.
hello,
I have a quick question, i have recently purchased the new spb mobile shell, but soon i discovered it does not have the cool feature spb v.2 had to change the soft keys... can some perhaps help me with this issue. My left soft key is no stuck on calander and my right spb home ( which is okay) but i dont use the calendar and would like to replace by a different soft key.
hey there,
not sure if that's exactly what you want, but with the "advanced config"-tool by schapman you can edit the softkeys anyway.
just google "advanced configuration tool v3.3"
76
o really i already have that utility....
thank you
just check: menu>more settings>keymapping
thanks a lot, by the way spb mobile shell is look good so far. especially the lifestyle thing def worth a try...
your welcome!
i already checked the leaked version... quite amazing. can't wait to try out the offical release. hope all the bugs from the leaked version are already fixed.
the most anoying thing was that the lifestyle screen was not working correctly in landscape mode... did they fix that?
yea they did....its worth the buy... im doing his facebook intergration thing and its actully preety cool stuff
The spb 3 disables my panel button. The phone hangs. But the button works fine if i exit out of the shell.
MS 3.0 officially available
I only want to mention that SPB officially released Mobile Shell 3 today. I've downloaded the final trial version and they fixed the freeze problem when pressing the panel button. Everything works smoothly - .
greetinx from austria
gordon
How does it appear on when a call comes in? Is it the same windows bubble which comes, or has SPB got something for that?
A screenshot will be helpful...
you can download the NEW trial verison from SPB, the leaked version im not gonna lie i used it it was a little sloppy, but the new one works great... i mean its not like SE did a better job at creating a better interface.
Hi guys,
Sorry for the new topic but I'm having trouble finding an app to rotate the screen to landscape for wm 6.5 - I've tried gsens and it doesn't work. Can someone point me to the right direction?
Thanks
for manually change try RotateScreen
[EDIT]
ups....sorry
here is the right one...
The zip file seems to be empty :S. Thanks for the reply though however i would prefer auto rotation - I'm not sure why this isnt auto supported with the rom ....
Edit - Gyrator 2 - That's so far provided the best results!
Try Gyrator. (http://gyrator.brins0.net/) I use it on my windows mobile 6.5, and it works perfectly!
demaxmeister said:
Try Gyrator. (http://gyrator.brins0.net/) I use it on my windows mobile 6.5, and it works perfectly!
Click to expand...
Click to collapse
Gyrator2 is amazing lol. it flips the phone so fast. its way faster then it was before in apps that it would flip in. and when the phone is in landscape the keyboard still knows and changes its type. thanks for the link
i found in this it work well with my TD2 . go to this link find the software name changeScreen v2.78 – Auto Screen Rotation application
Can both HTC Sense and WM Today pages coexist similar to the way SPB Shell works by have the Today page in the background?
There was a program called "TouchFlo Detacher" that I used on my Touch HD. Now I know this won't work with Sense, as it's designed to work with TouchFlo, but I'd imagine that it would be a simple change to put in the relevant class names for the Sense UI.
It replaced one of your softkeys with a toggle button so you could flip between TouchFlo and Today, and it was VERY fast! (It didn't close and later re-open TouchFlo - it simply hides it as Today is always in the background.)
Have a search for TouchFlo Detacher and ask the author if he'd be interested. He may ask you to beta test it for him
Edit:
Here you go - I found it for you...
http://forum.xda-developers.com/showthread.php?t=480475
Thanks Great starting point
Thanks Great starting point
SDBArbifox said:
Thanks Great starting point
Click to expand...
Click to collapse
You're welcome mate
Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u
bshakil said:
Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u
Click to expand...
Click to collapse
Looks good, but I personally don't like MortScript, so would rather a windows app, like the above-mentioned one.
I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
*aww my first post! Look at how ignorent I was back then lol.
froggylover1345 said:
I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
Click to expand...
Click to collapse
You shouldn't hijack threads.
I suggest you try one of the following...
http://forum.xda-developers.com/showthread.php?t=499578
http://www.lg-incite.com/
or keep googling
I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.
PurpleLlamaLover said:
I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.
Click to expand...
Click to collapse
Pretty sure you've figured it out by now eh?