Related
I have tried everything under the sun to upgrade my T-Mob PPPC/PE with Yorch's T-Mobile unofficial Upgrade to WM2003. I can't get it to work. Tried: loading ROM to SD card and soft reset, using XDATools OSImagetool, etc... :x
I believe it is tough for any one to advice if you don't state what exactly you did and what error messages you got .....
Are you trying bootloader method. or other method. Please present more detail regarding your problem including current rom/radio etc and things that you have tried already.
Sorry. First, loaded the file, NK.NBF onto my SD card using OSImagetool.exe. Then per instructions that were given to me, did a soft boot on the device. It simply rebooted and after it came up, there was a message on the screen asking my if I wanted to format the SD card for use with the device and telling me that if I hit "yes", the card would be erased and all data lost on the card.
The next thing I tried was to use OSImagetool.exe directly. Source- nk.nbf (on my desktop) and Destination: Device memory (via Programme A). The error I got was "Programme A not found - run with "--register" error opening target device.
I even tried to run OSImagetool.exe from the command prompt using --register as an argument and got the same exact error.
Then, I loaded the NK.NBF file to the SD card then ran OSImagetool with source: SD card, destination: Device memory. Then got the same error: "Programme A not found - run with "--register" error opening target device."
Hope that helps.
i dont know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Rudegar said:
i don't know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Click to expand...
Click to collapse
They are the same program OSImagetool is just the name of the .exe file.
@jhug whats your bootloader version? Sounds like it might be 5.17 or newer!
HTH
When the xda asked you if you wanted to format the sd card you should answer no, it means the rom has in fact been written to the card, you then need to enter bootloader mode, a soft reset is no good, just push the stylus in the reset hole while holding down the power button, it will then ask you to push the action button which is the centre of the 4 way pad, your rom will then be programmed, make sure the battery is charged also. When the process is complete, unscrew your stylus, then insert the top half of the stylus in the hole on the bottom right of your xda, just push once, after one minute push again, this turns the battery off, then on again, you should then have a working system.
my bootloader is 5.22 btw
I wanted to check and see if the ROM was in fact on the SD card, so I did a soft reset and the notification came up and asked me if I wanted to format the SD card. I clicked no and assumed the nk.nbf file was on the card. I then did a soft reset while pressing the power button and went into bootloader mode. It did not ask me to push the action button, so I did anyways and it went into diagnostics mode. Ideas???
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Rudegar said:
my boot loader is 5.22 btw
Click to expand...
Click to collapse
Consider yourself luck if you haven't had any problems upgrading
using the SD card boot loader method then!
Also most of the RS upgrade failures that I seen / fixed and tried to fix had boot loader 5.17 or higher, so keep that in mind. :wink: Lucky, Lucky you!
jhug said:
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Click to expand...
Click to collapse
Please do!
Also whats the size and make of your SD card?
Well, I tried it again and the same thing happened. It went into bootloader mode and did not ask me if I wanted to install the new OS. I tried pressing the volume button and it said to connect the USB cable. I also pressed the contacts button and it went into Diagnostic mode. Aaaaaarrrrrgh!
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
jhug said:
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
Click to expand...
Click to collapse
Some how I knew you where going to say a "256MB Sandisk"!
For some unknown reason had the same problem using the same card,
if you can try using a 64MB or a 128MB card and see what happens. :wink:
HTH
It finally worked! I loaded the ROM to the 256mb Sandisk SD card while in the unit, removed the SD card, inserted the SD card, then did a warm boot while pressing the power button and the ROM image loaded! I did the usual battery cutoff and then rebooted it and it works fine. Thanks everyone who gave me advice with this. :lol: :lol:
Where there is a well there is a way, great job!
But how in the hell did you figure that one though? :wink:
I decided to get creative. Dangerous when you're working in Wallaby, but it worked! :shock:
I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.
Seif said:
I have a siemens sx56 with AT&T. I was trying to upgrade the ROM version to unlock it. Using XDA developer software and during this process, somehow the connection between the computer and the phone stopped (active Sync). Now the phone is not responding and the screen still displaying the upgrading process. I tried to reconnect but the Active sync does not recognize the devise. I read in this forum that you can solve this problem by using SD card with a good ROM version. Here is what I did. I copied the NK.nbf to the SD card using my computer SD read/write slot. I inserted the SD card in the phone and did the boot loader mode. What I got is "Wallaby boot loader v5.22 GSM OK" that set. Does the phone will automatically ask to press action to start flashing or I have to press a certain key. I tryed all the keys but they give me different tests that they work fine. So far I am not able to find the key that will install the the cooked rom. After that, when I tried to use the SD card in the computer, it did not recognize the card and ask me to format the SD card. I tried the fat and the fat 32 format and download NK.nb1 and/or NK.nbf and again I got the samething. Do I need to down load the ROM file using the XDAtool or just copying the file from the computer to sd directory will do it. I would really appreciate it if someone points out the best way of handling this problem (i.e. get the phone to work with the appropriate ROM and unlocking it) thanks.
Click to expand...
Click to collapse
Bro, you shouldn't change the Sd fat you erased what's written on it anyway your unit is still on the safe side and you can bring it to normal.
First of all downgrade your bootloader to 5.15 >>>
goto this http://forum.xda-developers.com/viewtopic.php?t=3274
Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards
rafia said:
Hi,
I also have exactly the same problem with my Siemens SX56 as those of Seif's. My Wallaby's boot loader version is 5.22. Ramram said that the first thing to do is to downgrage bootloader. But I couldn't understand how to downgrade the bootloader because I do not have a copy of old bootloader. Should I use 'OSImageTools' or 'XDArit' to write backed up CE image to SD card?
Seif, how did you solve your problem?
Best Regards
Click to expand...
Click to collapse
You need XDArit to write the rom to your SD read the past post on how to copy rom to your SD which is the safest way of installing the rom into the device, by using XDAtools press on FIX BROKEN BOOTLOADER this will downgrade you bootloader to 5.15 don't forget to connect your unit to the cradle when you want to downgrade.
I recommend 1rst of all to make a quick search in threads to be totaly ready for this
this would help :
http://forum.xda-developers.com/viewtopic.php?t=6581&highlight=downgrade+bootloader
http://forum.xda-developers.com/viewtopic.php?t=2068&highlight=downgrade+bootloader
Good Luck now.
Update : How to fix failure during upgrading ROM
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Good Luck and special thanks to Biso for his help.
Re: Update : How to fix failure during upgrading ROM
Seif said:
The problem was solved. Here is what I did. I copied the NK.nbf file to the SD card using the XDAtools. It seems that the XDAtools uses special format for the bootloader that well recognize the ROM file on the SD card. Rafia your bootloader (v5.22) is fine you do not need to downgrade it.
You should follow this procedure:
1. Install ActiveSync that comes with the device.
2. download XDAtools from this site and install it in your computer.
3. Cook the ROM ( or get it by extracting the zip file from the XDA developers special edition ROM.)
4. Use the XDAtools to copy the cooked NK.nbf file from your computer to the directory of the SD card
5. Insert the SD card in the dead device and go to the bootloader mode (soft reset while pressing power key). Make sure it has more than 80% battery before starting.
6. If it is still working and the bootloader ver. is older than 6.22, it will ask you to press action to start flasing.
7. Once finished, remove the SD card and hard reset, wait 60 sec and hard reset again.
Click to expand...
Click to collapse
Thanks a MILLION for this info. I'm in the same boat, with bootloader 5.22. One question though, when I'm in bootloader mode, which option do I choose from the menu to transfer the ROM to my device from the SD card? Will there be something automatically coming up? Or will I use one of the options listed below:
1. CE ROM TO SD
2. BOOT TO SD
3. CE + BOOT TO SD
4. GSM ROM TO SD
5. CE + GSM TO SD
By the way, so I never do anything to ruin my device again, can someone please explain what each option does?? I really don't have a clue.
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!
Linger1974 said:
Rudegar said:
as you can read from the menu you type in all these options are to the SD card
and they are to backup i suppose
rom upgrading should start automatic when a sd card with valid rom is in the sdport
and you are in the bootloader
maybe it ask you i forget but it's not something you have to find browsing
the menu's
Click to expand...
Click to collapse
Thanks for answering my question. Now I simply need to find a really good ROM to use to load back onto my device. What I would like to do is end up with Windows Mobile 2003, but the device is locked at the moment.
Can someone recommend a ROM for me to load onto the device so that I can then unlock it and THEN upgrade to 2003? Or is there a 2003 ROM out there that will also unlock? Originally, I ended up in this predicament by upgrading to the 2003 upgrade from Rogers AT&T, but that locked the device on me. I then tried to use a cooked 2003 ROM, and that's where I am now, without a useable device.
Thanks for all replies!
Click to expand...
Click to collapse
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck[/quote]
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?
Linger1974 said:
First of all get the "Special Edition Rom" to your device Unlock it then cook any other Rom you prefer
Special Edition Rom at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
Good luck
Click to expand...
Click to collapse
Thanks, Ramram. I'm sure I'll have more success this time, but it's just odd that I went from a 2002 ROM, which was unlocked, to the Rogers 2003 ROM, and the phone was locked after that.
I guess I should stay away from that Rogers ROM then?[/quote]
Why to worry about the Rogers Rom you know now a way to unlock your phone.
I assume the Rogers rom is based like the At&t rom which it has the sound clipping bug , so I'd rather say that you could cook a T-mobile rom 4.01.16 WM2003 and try it it does not have the sound clipping bug..
Hello everybody,
2 days ago i flashed the dutty r5 NOR by accident, should have been NLD.
I cannot understand NOR whatsoever so i tried to re-flash my phone with the NLD version, but when i go into bootloader mode it cant find the image file. Im sitting at 90% battery charge.
What i do:
1) USB connection between phone and pc.
2) Copy + Paste the TOPAIMG.NHB in my storage card.
3) Disconnect USB between phone and pc.
4) Power off the phone (by holding the power button and press yes)
5) Press and hold volume down button and the power button
6) I see a rainbowscreen with the specs i persume from my phone
7) for 0,5 sec, i see the following:
Loading...
No image file!
8) Rainbowscreen again, and on the bottem 'serial' in the white color.
What did i do wrong? It should work..
Its very annoying to have a phone in a language you dont understand
Thanks in advance
J-r0en
Edit:
Currently i cant flash through my pc with active synch connection because my laptop is back to the factory for repair.
Cant find the Cd that came with the phone to install windows mobile device center, which is for vista+ , and this pc is xp professional. :\
2) Copy + Paste the TOPAIMG.NBH in my storage card.
Further try formatting your SD-card with FAT32. That in combination with renaming your file to the right extension, should work.
Thanks for the response.
I made a typo in the openingspost.
The image file on the storagecard is TOPAIMG.NBH.
I flashed the current ROM via the storagecard so it should
be fat32. I'll try to reformat the storagecard and see what happens.
*thumbs up*
It didnt work, any other ideas ?
my original rom was in another language, maybe that aint allowed? to flash a new rom in a different language.
True, unless you have HSPL this won't work.
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
J-r0en said:
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
Click to expand...
Click to collapse
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
BumAround said:
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
Click to expand...
Click to collapse
Nope, no typo's, "TOPAIMG.NBH" just like that =p
Have you tried TOPAIMG.nbh (lower case .nbh)?
I had the same issue flashing the original 6.5 OEM flash and Dutty's.
I have a 16GB card. I think that may be the issue. Perhaps 8GB or less will be recognised.
Anyway. All I did was use the wrapper method.
I booted to HardSPL and then connected it to the PC, ran the wrapper file included with the firmware and went through the modified firmware wizard on the PC and all sorted
- Geoff
In case anyone else comes across this thread while having this problem...
I had the same problem with my Rhodium. The problem disappeared when I switched from formatting that particular SD card with FAT to FAT32.
So, try FAT32 and see if that helps!
Finally!!!! took me forever to fix this. So my problem was the same, after flashing a custom ROM thru RUU, I got stuck in the splashing screen and kept getting "No image file" in HardSPL. So my solution was "SWITCH my FAT32 8GB microSD with a FAT32 4GB microSD". That's all! hope this will help someone else too.
Happy New Year!!!
Well i didnt fix it, still didnt flashed the rom that i wanted (in dutch) but i went back to WWE, that díd work.. eventually
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
All roms can be flashed this way mate, just use USPL or HSPL and use storage card method to flash
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
nitol said:
thanks for your reply boss, but my one is 1.56 olinex(once i've done it). i am using xt grid evo.
now i am trying to change my rom but i can't.
i have puted several roms(cloudy,xtgrid leo,nrg,goldlocke) in the root of my storage card and hard format my phone but my ph is not flashing with the new rom.
can any boss help me please?
i want to get rid of this trouble as soon as possible.i don't want to use any pc to flash.
what are the steps to get rid?
Click to expand...
Click to collapse
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
thanks for your suggesion boss. i've tryed as you said,used an one gb sd card.but the result is same.what to do now? i need help.please somebody give me a solution.
thanks
May I ask why you don't try pc method?
sure sir,my pc is disturbing,not only that,most of the time i used to brouse through my phone because due to my business i can't find enough time to sit infront of my pc.that's why i need help about storage card method.
nitol said:
it would be very helpfull to have a list of those roms which does not need a pc to flash. i am requesting all bosses to provide the list in this thread. thanks
Click to expand...
Click to collapse
as mentioned, ALL ROMs are capable of being flashed to a phone through SD Card. But since you are a new member, you might need to think of these:
1. did you have the correct filename of the nbh file inside your card?
it should be "BLACIMG.nbh" and must be placed at the root of your card.
2. do you know how to go to the bootloader mode(tri-color screen)?
phone off --> hold "voldown" and short press "power" button
it MUST be working.
thanks for your rep. sir, offcourse i know how to do that,i've tested most of the roms till april'10.last 3months i did not try any.but from till last few days i am trying to change my rom and non of them are working. i am using "xt grid evo", my redio is latest,i am taking rom into the root of my sd card,i am hard formating. but nothing works.
i don't know why,nobody knows why...
You have to rename the ROM image to "BLACIMG" before putting it onto your SD card. I use an 8GB card and have never had a problem.
alchopop said:
Personal experience is that any SD card larger than 2gb will not instal new Rom's
Cards smaller than 2gb work fine.
Yours may be different but try and see. If you do not have a small SD card they are very cheap these days mate
Click to expand...
Click to collapse
i have 4gb card and have room and i can flash new rom
gagi75 said:
i have 4gb card and have room and i can flash new rom
Click to expand...
Click to collapse
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
alchopop said:
Like I said, your experience may be different. My 8gb card WON'T workm my 2gb card does work. Go figure
Click to expand...
Click to collapse
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
miniterror said:
i think you have to format youre 8gb sd card to fat 32
i also use a 8 gb card without any problems AFTER i formatted it
Click to expand...
Click to collapse
I think i have a dodgy card because every time i try to use it on my pc it ask's to check for errors. I have done that several times, copied everything to and from the PC to format it and it still has problems. It works OK in the phone though so I just accept the status quo and flash from the smaller card. Going to upgrade soon so will probably get a new SD card then and see if my experience changes after that. Thanks for your help though
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
nitol said:
hey hey hey what about my problem? i'm still stucked,can't flash any rom in sd card method. i always download them from my ph. rename BLACIMG.NBH,hard format but no result.my one is 16 gb. i've tryed on 1gb also but not working.
should i rename it through my pc?then copy to my sd card and hard format?
WHAT IS MY SOLUTION SIR?
Click to expand...
Click to collapse
It should be renamed "BLACIMG.nbh" NOT "BLACIMG.NBH"
Note LARGE caps AND small caps
When you reboot the phone hold down the Volume down button until the bootloader shows then wait till it reads the card. Then press power button and it will start ti flash the new ROM
Good luck
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
nitol said:
sir,i know about cap & small matter. acutally i rename "BLACIMG.nbh" but not working....
Click to expand...
Click to collapse
All i can suggest then is try a new card mate. Like i said before, I have a card that does work and a card that won't work
i've also tryed in a 1gb card sir.anyway,no solution for my problem, bosses can close this thread.
thanks to all
for 1st time i hear someone to have problem flashing because of the SD card!
From 2 years i flash only from the SD card and im with the default 8GB Sandisk that comes with the Phone when i bought it.
So like already many peoples say the answer is
ALL Roms can be flashed with the SD Card methood
hi , i try many option to return at wm6.5 but not work i very need help thank
jubas said:
hi , i try many option but not work i very need help thank
Click to expand...
Click to collapse
and what exactly would you need help with?
return on wm6.5
jubas said:
return on wm6.5
Click to expand...
Click to collapse
a) Put a stock rom onto your sd card and name it "leoimg.nbh"
b) Put phone in bootloader (hold down volume button, then press power button and wait for instructions)
Or just flash a stock rom via active sync. There is many many guides on forum to do this.
Its very easy. Format your sd card using a digital camera, download a stockrom meant for your device meaning the stockrom with the native language of the phone. Unpack the stockrom and change the .nbh data into leoimg.nbh.
Format you sd card in your computer into fat32 and copy the leoimg.nbh data into it. Put the sd card into your phone and go into bootloader, then follow the instructions on your phone's screen. That should do the job.