MY Elfin s volume slider is not workin properly its funcitoning automatically how do i disable it..
can some one help me please thank u
I would also like to know that. Mine works but I'm not able to put it into pouch without changing the volume.
Related
Hi,
I have a very annoying problem. When someone is calling and I don't want to pick up the call there is no option to put the Hermes in silent mode !!!
Even when I change the volume to "Off" the phone still rings !!!
Only options I have are "Accept" / "Reject".
Please if anybody knows a solution to work around this problem, let me know.
Thanks a lot
Bukshi
If u press jogdial towards downwards when somebody calls u then it will silent the ringer !
Thanks vijay_kumar
It works !!!
I'm using AE Button Plus and have redirected the jog buttons (volume sliders) to be up and down, but that has resulted in not being able to use the jog buttons (volume sliders) to silence the incoming phone call as mentioned above. I've tried all variations of the "Restore volume slider" options in AE Button Plus - but nothing has restored this "silence ringer" option. If anyone knows of a workaround or registry hack or whatever, please let me know.
I have the same problem as Xilicon, I use AEbutton and I tried all sort of settings to be able to put my Hermes silent when it is ringing (I don't want to reject the phone call). NO success
Does anyone know a another way to put the Hermes silent workaround ?
Hello all,
I've just done the stylus fix and now the volume slider has stopped working and i don't know why. It doesn't spring back to centre anymore or do anything onscreen or adjust the volume.
I have the service manual but it only says to disconnect keyboard fpc cable, but not how to do so, and the picture is unclear.
I need to do this to remove the main board and look at the volume slider properly. but, I'm a bit scared of breaking it further.
Please, if you know how to help out, or have had this or a similar problem let me know what to do.
Thanks in advance
Hi, I've a qtek 9090 with helmi WM6.1
the volume (phone and rinds) decrease from normal to ZERO by itself and for some minutes i can't increase it, because it decrease again.
How can i exclude the button of the volume or use a program that control the volume.
Thanks in advance
Paolo
Your volume slider switch may be stuck.Pls find the aero mark in the attachment.
vsvvijay said:
Your volume slider switch may be stuck.Pls find the aero mark in the attachment.
Click to expand...
Click to collapse
Thanks,
I've opened my qtek and i have moved up and down the slider switch and goes well.
But sometimes (1 every hour...) the volume decrease to zero by itself again...
How can I exclude the volume slider switch, and use only a new program to set the volume of the phone and of the rings?
thanks
Paolo
Rather software problem. If you use some profile managers - check your settings. You may try to do hard reset and then check.
i have hinstall the rom of sun dream but it's quite the same,
there isn't a program that excude the colume swith and do the same thinks by software?
thanks
Paolo
noone can help me please?
it seems that this is hardware button problem and not woftware one, do the only logical way is to disonnect the volume slider button ...
I do have the same problem, but until now I thought that this is a HW problem...
I also have a problem with the volume at the phone. Sometimes the volume is OK, but sometimes I can't hear anything until I'll push the screen gently/hardly.
The SW-volume is still at middle for both (phone and device).
Open and cleaning didn't fix the problem...
Greetz Rossi
xplode said:
it seems that this is hardware button problem and not woftware one, do the only logical way is to disonnect the volume slider button ...
Click to expand...
Click to collapse
Hy
How can i disconnect the volume slide button?
Can you help me please?
or there is't a program that can do it for myself via software?
to reassign the volume slider button to something else...
Thanks in advace Xplode
Paolo
Nonody can help me please?
what i hve to cut to exclude the colume slide bar?
Thank in advance
Paolo
Hi, my BA have the same trouble with volume up slider.
I tryed to hardreset and upgrade rom but it does not help. Opening cover and cleaning also do not fix the problem.
Last, I removed the main battery and wait about 1 hour until the backup battery is empty completely.
After power up again, my BA resets and ... operates normally.
I guess, some critical data is changed randomly in my BA by unknown reasons. The changing remains in memory of BA because of the backup battery. Hardreseting or rom upgrading did not restore the data. May be it likes CMOS of PC ?
Sorry for my bad English.
Huy Minh
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
whiteroom77 said:
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
Click to expand...
Click to collapse
At a guess, i think its meant to be like that so you can adjust the volume if you are using it as a music player without having to unlock the phone. Does it affect you when you use the phone? (sorry i don't know how to help but I just thought I'd add my opinion)
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
I have a related difficulty... Hope you don't mind me adding to this thread rather than setting up a new one...
If my phone (Touch HD on ROM 1.56.405.1) is PIN-locked and I receive a call, I'm unable to change the in-call volume without telling the caller to wait while I unlock the phone and alter the volume... Is there any way of allowing the volume keys to work in this situation without having to unlock? I've search high and low for an answer or some suitable app to handle this.
Thanks.
Sorry - just done another search in these forums and have seen some similar questions and responses... I'll take a look there.
whiteroom77 said:
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
Click to expand...
Click to collapse
Hi,
I tried using the volume keys when the device was locked, you can indeed adjust the ringer volume whilst the device is locked, although if you try doing this after you switch the screen off by pressing the top power button, pressing the volume keys has no effect then.
Providing the screen is off, you shouldn't have any problems switching your phone to silent unintentionally .
Just thought I mention this.
it's a known problem that regards standard windows mobile locking system. Only solution is using another locking program (s2u2, pocketscreen, touch lock pro, lockmelite and so on). There are on this forum aplenty.
regarding to the other problem with PIN and incall volume i am not really sure but again iirc it's a winmo default locking "feature".
strange...
When I use the keylock (long press endcall-button), my volume keys won't work.. even when the screen is on.
This has been on my stock rom (1.14 NLD), new stock rom and on Dutty's 3.3 XT...
Grtz,
Degake
Can anyone please help me disable the volume slider on the left side of the elf.. i have a problem with it because my valume seem to be changing all the time
It comes with the hardware.
I never heard anyone trying to disable a hardware function.
You can try to read this thread.
http://forum.xda-developers.com/showthread.php?t=488211
They have some helpful tips.