Can anyone please help me disable the volume slider on the left side of the elf.. i have a problem with it because my valume seem to be changing all the time
It comes with the hardware.
I never heard anyone trying to disable a hardware function.
You can try to read this thread.
http://forum.xda-developers.com/showthread.php?t=488211
They have some helpful tips.
Related
Hello all,
I've just done the stylus fix and now the volume slider has stopped working and i don't know why. It doesn't spring back to centre anymore or do anything onscreen or adjust the volume.
I have the service manual but it only says to disconnect keyboard fpc cable, but not how to do so, and the picture is unclear.
I need to do this to remove the main board and look at the volume slider properly. but, I'm a bit scared of breaking it further.
Please, if you know how to help out, or have had this or a similar problem let me know what to do.
Thanks in advance
I seem to have lost the vibration feature on my buttons. All tabs are checked. Not recovered even after a hard reset. Probably a pre-hard reset app I'd loaded affected this.
Does anyone know of a reg tweak or another fix?
Thanks for the help
Simon
Does your phone vibrates when called?
Hi - thanks for taking an interest. The problem seems to have corrected itself.
I had to re-load .net CF 3.5. Don't know if that had an effect but after the hard reset and a couple of soft resets the buttons vibrate again.
Thanks again
Simon
3rd Occurane
Sky740, did you experience this problem again? I have not installed any other ROMs but noticed it after I installed some other software, including hd tweak, advanced config, mobilmagic button stuff and .net framework 3.5. Did you use any of these items/think they anything to do with it? I hope my problem goes away with my first Upgraded ROM. I saw another thread with the same problem, he was about to send back for warranty, but maybe I talked him out of it. Any information helps,
Thanks!
HI Guys,
Did you manage to figure out what is causing this? I have just got my HD and have the same problem...the 'haptic' vibration from the buttons doesn't seem to work. it has been like this from out of the box and i have not added any additional progs (only got it unlocked from Orange!!). the vibration works for incoming calls so it doesn't seem to be an issue with the hardware.
Any advice would be appreciated!!
Regards
~Cinner70
well
well, haptic feedback you mean, any button you press, on touchscreen and all? The only buttons that are suppose to have feedback without touch response application installed is the home, back, phone answer and hangup buttons at the bottom. There is a setting for those vibrate items. Try settings, personal, buttons, virtual button, see the vibration check mark? Does the Teeter game have vibration feedback on yours? If these things make a difference for you, you probably don't have a hardware issue, but if your getting any vibrate, should just be settings. Some of us on here are having major vibration hardware dysfunctions, just awful
Thanks for the response!!
Sorry to hear 'bout the major vib issues
I have tried all the 'virtual buttons' settings and the touch flo settings but i dont get any response from any buttons. i tried TEETER but there's no response from that either, but again i get vibration when I'm called.
Just thought someone may have noticed a 'glitch' somewhere, cause i initially noticed that if you apply a phonelock pin on set-up, it disables the use of the end-key to lock the phone..and i thought it may have been a software glitch or something....
New to the phone and win mob so soz if these are noob q's
Cinner70
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
whiteroom77 said:
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
Click to expand...
Click to collapse
At a guess, i think its meant to be like that so you can adjust the volume if you are using it as a music player without having to unlock the phone. Does it affect you when you use the phone? (sorry i don't know how to help but I just thought I'd add my opinion)
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
I have a related difficulty... Hope you don't mind me adding to this thread rather than setting up a new one...
If my phone (Touch HD on ROM 1.56.405.1) is PIN-locked and I receive a call, I'm unable to change the in-call volume without telling the caller to wait while I unlock the phone and alter the volume... Is there any way of allowing the volume keys to work in this situation without having to unlock? I've search high and low for an answer or some suitable app to handle this.
Thanks.
Sorry - just done another search in these forums and have seen some similar questions and responses... I'll take a look there.
whiteroom77 said:
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
Click to expand...
Click to collapse
Hi,
I tried using the volume keys when the device was locked, you can indeed adjust the ringer volume whilst the device is locked, although if you try doing this after you switch the screen off by pressing the top power button, pressing the volume keys has no effect then.
Providing the screen is off, you shouldn't have any problems switching your phone to silent unintentionally .
Just thought I mention this.
it's a known problem that regards standard windows mobile locking system. Only solution is using another locking program (s2u2, pocketscreen, touch lock pro, lockmelite and so on). There are on this forum aplenty.
regarding to the other problem with PIN and incall volume i am not really sure but again iirc it's a winmo default locking "feature".
strange...
When I use the keylock (long press endcall-button), my volume keys won't work.. even when the screen is on.
This has been on my stock rom (1.14 NLD), new stock rom and on Dutty's 3.3 XT...
Grtz,
Degake
MY Elfin s volume slider is not workin properly its funcitoning automatically how do i disable it..
can some one help me please thank u
I would also like to know that. Mine works but I'm not able to put it into pouch without changing the volume.
Hello you all
i got my trophy today and i was wondering if there is any option to disable the vibration for the "physicale" keys.. or i better say.. for the 3 touch keys (back,home,search) if its possible to disable it please tell me how, thats the only ugly thing if noticed ^^
thanks for help!
I haven't heard of a way to disable the vibrations yet, but there might be a tweak sooner or later. You can turn off vibrations completely if you want though.
I don't know. I know you can disable the search button from doing anything, but the button still causes the motor inside to activate.
Actually I've just stumbled upon a solution. It looks like it works, but I haven't tried it.
Disable haptic feedback