Hi, I've a qtek 9090 with helmi WM6.1
the volume (phone and rinds) decrease from normal to ZERO by itself and for some minutes i can't increase it, because it decrease again.
How can i exclude the button of the volume or use a program that control the volume.
Thanks in advance
Paolo
Your volume slider switch may be stuck.Pls find the aero mark in the attachment.
vsvvijay said:
Your volume slider switch may be stuck.Pls find the aero mark in the attachment.
Click to expand...
Click to collapse
Thanks,
I've opened my qtek and i have moved up and down the slider switch and goes well.
But sometimes (1 every hour...) the volume decrease to zero by itself again...
How can I exclude the volume slider switch, and use only a new program to set the volume of the phone and of the rings?
thanks
Paolo
Rather software problem. If you use some profile managers - check your settings. You may try to do hard reset and then check.
i have hinstall the rom of sun dream but it's quite the same,
there isn't a program that excude the colume swith and do the same thinks by software?
thanks
Paolo
noone can help me please?
it seems that this is hardware button problem and not woftware one, do the only logical way is to disonnect the volume slider button ...
I do have the same problem, but until now I thought that this is a HW problem...
I also have a problem with the volume at the phone. Sometimes the volume is OK, but sometimes I can't hear anything until I'll push the screen gently/hardly.
The SW-volume is still at middle for both (phone and device).
Open and cleaning didn't fix the problem...
Greetz Rossi
xplode said:
it seems that this is hardware button problem and not woftware one, do the only logical way is to disonnect the volume slider button ...
Click to expand...
Click to collapse
Hy
How can i disconnect the volume slide button?
Can you help me please?
or there is't a program that can do it for myself via software?
to reassign the volume slider button to something else...
Thanks in advace Xplode
Paolo
Nonody can help me please?
what i hve to cut to exclude the colume slide bar?
Thank in advance
Paolo
Hi, my BA have the same trouble with volume up slider.
I tryed to hardreset and upgrade rom but it does not help. Opening cover and cleaning also do not fix the problem.
Last, I removed the main battery and wait about 1 hour until the backup battery is empty completely.
After power up again, my BA resets and ... operates normally.
I guess, some critical data is changed randomly in my BA by unknown reasons. The changing remains in memory of BA because of the backup battery. Hardreseting or rom upgrading did not restore the data. May be it likes CMOS of PC ?
Sorry for my bad English.
Huy Minh
Related
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
maybe hard reset or rom update? , cant imagin what will do that unless somthing is hogging all cpu power perhaps
A reset will help but I'm not happy to update my ROM. I'm afraid for more problems.
witte_nl said:
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
Click to expand...
Click to collapse
Did you have the power cable in?
I have the same problem when i'm charging the phone.
When i press the power on button the light stays off.
Maybe you've got Spb GPRS Monitor installed on it?
Izzard-UK said:
Maybe you've got Spb GPRS Monitor installed on it?
Click to expand...
Click to collapse
Spb GPRS Monitor does this problem on my 9100 too, any software with SPB in the name seems quite buggy.. ;-)
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
witte_nl said:
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
Click to expand...
Click to collapse
You will.. do a search - I posted this a while back... they know about it.
Terran
MDA Backlight issue
I ran across a problem with the MDA, where I adjusted the Backlight settings. From there on the Backlight woulf not turn on unless I went to the setting control to adjust it. The fix: Go to backlight settings, set your brightness desired (maybe in the middle). Go to Battery power from the tabs that are currently listed. Make sure you have (Turn on Backlight when a button is pressed or the screen is tapped) Selected. Then press ok.
That should fix it if the issue you are experiencing is similar to mine.
I have the same problem with my artemis. And i think is from spb plus since the backlight control button from today dont even work on this new version. Or from phone profiles. Everytime i make a soft reset i have to reajust the backlight or when it turns off i have to make another soft for reajusting before it goes out. It's quite boring and i'm trying to find an app to replace spb with the close button and task button ant the today buttons shortcuts if is that the problem. And my artemis rom dont know why dont have the option on the backlight settings to turn on when screen tapped or key pressed.
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
whiteroom77 said:
I'm using an out the box Orange Touch HD (rom - 1.19.61.1 WWE)
I have found that the volume key still works even when the keylock is active.
I have used HDTweak already for other things and couldn't see anything relating to this. also searched forum to no avail (maybe not well enough )
Does anyone know of a way to fix this as it clearly seems to be an oversight.
Thanks in advance.
Click to expand...
Click to collapse
At a guess, i think its meant to be like that so you can adjust the volume if you are using it as a music player without having to unlock the phone. Does it affect you when you use the phone? (sorry i don't know how to help but I just thought I'd add my opinion)
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
I have a related difficulty... Hope you don't mind me adding to this thread rather than setting up a new one...
If my phone (Touch HD on ROM 1.56.405.1) is PIN-locked and I receive a call, I'm unable to change the in-call volume without telling the caller to wait while I unlock the phone and alter the volume... Is there any way of allowing the volume keys to work in this situation without having to unlock? I've search high and low for an answer or some suitable app to handle this.
Thanks.
Sorry - just done another search in these forums and have seen some similar questions and responses... I'll take a look there.
whiteroom77 said:
thanks for the reply. i understand what you are suggesting but if i press the volume key then by default it adjusts the ringer volume and not the system volume. This is a problem as when its in a pocket i have already had more than one situation where I have gone to get the phone out and without realising, turned the ringer to silent.
Click to expand...
Click to collapse
Hi,
I tried using the volume keys when the device was locked, you can indeed adjust the ringer volume whilst the device is locked, although if you try doing this after you switch the screen off by pressing the top power button, pressing the volume keys has no effect then.
Providing the screen is off, you shouldn't have any problems switching your phone to silent unintentionally .
Just thought I mention this.
it's a known problem that regards standard windows mobile locking system. Only solution is using another locking program (s2u2, pocketscreen, touch lock pro, lockmelite and so on). There are on this forum aplenty.
regarding to the other problem with PIN and incall volume i am not really sure but again iirc it's a winmo default locking "feature".
strange...
When I use the keylock (long press endcall-button), my volume keys won't work.. even when the screen is on.
This has been on my stock rom (1.14 NLD), new stock rom and on Dutty's 3.3 XT...
Grtz,
Degake
My Diamond is about to go in the bin!!!
If anyone knows how to edit the registry to "switch off" the volume keys on the Diamond then please, please, please help me.
The volume screen is permanently flashing on my screen, and seems to be stuck on the up button which means I can't use the phone. it's not a hardware issue as the buttons aren't stuck or won't work, it's from a bad flash (according to HTC!) - i've tried stock roms/MTTY etc but the problem still persists from one rom to another.
Any registry experts willing to help
Not sure how you can achieve this if the volume is always on top but if you install AEbutton you can unmap the volume buttons
thanks for the reply i'll give it a try
What happens if you leave out volume control? I guess MS volume control would prolly pop up then ?
skilty said:
My Diamond is about to go in the bin!!!
If anyone knows how to edit the registry to "switch off" the volume keys on the Diamond then please, please, please help me.
The volume screen is permanently flashing on my screen, and seems to be stuck on the up button which means I can't use the phone. it's not a hardware issue as the buttons aren't stuck or won't work, it's from a bad flash (according to HTC!) - i've tried stock roms/MTTY etc but the problem still persists from one rom to another.
Any registry experts willing to help
Click to expand...
Click to collapse
I can almost 100% sure tell you that it's hardware there is a sensor underneath the button that is probable stuck. because if it wasn't then a rom flash would have fixed it. there is a spray don't know what it's called in
English but something like contact cleaner it cleans electric parts for dust
gullum said:
I can almost 100% sure tell you that it's hardware there is a sensor underneath the button that is probable stuck. because if it wasn't then a rom flash would have fixed it. there is a spray don't know what it's called in
English but something like contact cleaner it cleans electric parts for dust
Click to expand...
Click to collapse
Thanks for the replies everyone, AE button seems to have fixed it, although i'm not 100% sure that it's gone yet, as it could stop for a while and start again.
HTC did say it was a hardware fault caused by installing hard spl/custom rom (although I only left Hard spl when I sent it back..by mistake ) and wanted to charge me £230.
i'll try the spray cleaner anyway I don't think it will do any harm.
Thanks again for all the replies, at least it's semi-useable again...
Hi
When using the HTC Sense Music player, the volume key sometimes acts as forward/backward in songs and some times as volume key. Is this a bug or am I doing something wrong here. Cannot find any settings regarding this issue
Hmph, I never got this issue.
Same problem here
I'm facing the same issue here. Any advise ?
Even i was facing same issue in youtube client ...
but after soft reset its working fine
same problem
hi. i'm facing the same problem. anyone discover anything?
yes.. that ALL of you installed some nice icons taskbar lol.. remove it..
icons taskbar?
thank you for the help but what do you mean by
icons taskbar?
adolfotregosa said:
yes.. that ALL of you installed some nice icons taskbar lol.. remove it..
Click to expand...
Click to collapse
I don't install things like that, but have this problem. It's nothing to do with anything that's installed on top of the UI.
This is a known issue, and has been discussed on here before. There is no answer at the moment. It's most likely a feature that has bugs in it. It would be nice to just stick to either volume or track skipping, depending on what you want. I normally get volume control from the buttons, but it does occassionaly skip tracks.
HTC may be aware of it - they may not. Since it happens so rarely for me, I'm not too fussed, but if it's bothering someone then they should report it to HTC, just in case they don't know about it.
solution
i found a solution but it's a bit painfull!!!!
hardreset your htc and after that it should be fine.
i've done this and my volume key it's working as it suppose to do!
loizos88 said:
i found a solution but it's a bit painfull!!!!
hardreset your htc and after that it should be fine.
i've done this and my volume key it's working as it suppose to do!
Click to expand...
Click to collapse
This isn't a solution, as it's an intermittent problem. If you've had it before, you'll have it again. It will just take a while to reappear.
i think it was something that i installed that cause this problem.
loizos88 said:
i think it was something that i installed that cause this problem.
Click to expand...
Click to collapse
It's an issue with the UI. It's possible that you could cause this by installing something, but uninstalling it would not stop it happening as the problem is native.
The volume key is dual action key when useing the HTC Sence MP.
in order to operare the the volume just turn the screen to "off" by pressing the "OFF/End Call "key.Enjoy the music.
zmor1 said:
The volume key is dual action key when useing the HTC Sence MP.
in order to operare the the volume just turn the screen to "off" by pressing the "OFF/End Call "key.Enjoy the music.
Click to expand...
Click to collapse
uh? Actually the whole volume function is messed up on the HD2. Sometimes it works, then you suddenly no longer see the volume indicator when using the buttons when watching a video, or it forwards/rewinds the videos/music and best of all sometimes it just crashes the whole device! Soft-reset and it's back to normal. There's a bug in Manila and HTC has to fix it.
This bug and the sms bug are the only problems i have with this phone.. both are so frustrating..
its a real pain in the ass sometimes, i experience this problem too - its definitely a bug
Hello. I would really appreciate help on this one.
I recently got an HTC HD mini T5555, OS version: 5.2.23103.
After performing hard reset everything on the cell works perfectly.
However, after a software installation, the volume buttons won´t make any change to volume when pressed.
The volume controll dosn´t even show up in the display. Now, If I perform yet another hard reset,
(the software installed will be removed) volume will be changable again.
The software itself has a built-in function for listening to music, making cals etc.
From within the software you can change the volume using its own controls (not HTC volume control).
That works fine.
The software is called "Handi".
"Handi is a program tailored for people with cognitive disabilities.
The most fundamental difference between the Handi and "normal" hand computer program
is that Handi-programs have far less information and less choice per view".
I have no experiences from other hand computer programs but assume they all work the same way.
I´m sure there is a way to fix this in the registry. Anyone got ideas or useful advice?
Need more info? I´ll try to give you as much as I know about it.
Thanks in advance!
Regards /Anders
First things that came up my mind:
1. The volume buttons are disabled by the software
2. The Volume software is overwritten (reg keys, or other files)
Maybe here is a solution by installing a cab with volume control:
http://htcpedia.com/forum/touch-hd-rom-development/1161-[request]-htc-volume-control.html
More custom volume controls:
http://forum.xda-developers.com/showthread.php?t=598997
But be careful, modifications can make you do a hard reset .
I installed the CAB but still the same...
Gonna search the registry instead. Thanks anyway!