Database Users

Upgrade without usable Mail button

Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad

Logically if you map the mail button to any of the top buttons, that should work as BA still keeps the entire software prior to pressing mail button. However an expert should confirm. Dont take risk.

Upgrade without usable mail button
kleinepelle said:
Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad
Click to expand...
Click to collapse
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not

Thank you very much.
It runs very good.
MFG Kleinepelle

Great advice! this should be placed in the wiki as well

Thanks to you and to all others <ou mwntioned for this help. Dtipex

thanks, it works!
thanks, it works!!
crabiorc said:
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not
Click to expand...
Click to collapse

very well explained . good job

Problem with Xplode wm6.11 Upgrade

Hello
PPC: Blue Angel T-Mobile GER
Rom: Xplode Wm6.00.00.WWE
Radio:1.15.00
Protocol: 1337.45
From this rom i want to upgrade to Wm6.1 from Xplode.
My Upgrade steps:
1. Bootloader
2.The ppc shows "Serial"/"Usb" and "v2.05"
2.2 Kill Active sync
3. starting MaUpgradeUt_noID
4.MaUpgradeUt_noID gives no informations about the current Rom /upgrade rom
5.Next
6. Error 150
What i have to do?
Plx help me
Sry for my bad english!
Thx to all

It must be an OS problem
Try using Windows XP rather than using Vista.
I got the same problem with my XDA IIs,
I tried it in Windows XP and successfully Updated to WM 6.1

i have Windows XP no Vista

Give it a try without killing ActiveSync on PC.
1. Put device in bootloader mode
2. Put device in the cradle
3. Start update program (wait till 100% and do not remove device out the cradle)
4. When update has finished, hard reset the device
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
- If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.(“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES)
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
- If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
- Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
5. Your upgraded ROM is now running!
Greets Rossi

news for bb connect

are there news for bb connect on htc polaris??
thank's

try www.ipmart-forum.com. there is a version there for htc touch on pocketpc applications. tried it but really i had no use for it. hugs alot of memory

Check out sems.org. Has all the different BBC versions on there and some forums on running the software. I have been unable to get BBC working on the Cruise. The software installs but doesn't connect and get email. Same symptoms others on that site mention. In the end I just used Exchange push mail and have no need for BBC. Like the previous poster said, it's a resource hog.

I use BB Connect in htc device, incluiding P3600 and Cruise, with this metohd
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, and change HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
4.Then soft reset.
5. Install Blackberry Connect http://rapidshare.com/files/124768324/BBConnect4.0.0.97.cab OR http://rapidshare.com/files/135084257/BBConnect_WM6_Profession4.0.0.100.cab (lastest Version)

not working on my htc polaris
in the Identity PIN is Pending
I using ROM: udK Diamond R6

dabuti9 said:
I use BB Connect in htc device, incluiding P3600 and Cruise, with this metohd
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, and change HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
4.Then soft reset.
5. Install Blackberry Connect http://rapidshare.com/files/124768324/BBConnect4.0.0.97.cab OR http://rapidshare.com/files/135084257/BBConnect_WM6_Profession4.0.0.100.cab (lastest Version)
Click to expand...
Click to collapse
what rom were you using with cruise ?

New to windows mobile

Hi, I just bought my first mobile with windows mobile system.
At the moment I see from Device Information:
ROM version: WM6.1de LUC WWE.
Well I would like to try different op systems like WM5 and WM6. But I can't find any tutorials for newbies. Also I live in Estonia and I would like to use as a phone, so what about the unlocking? At the moment it's unlocked, but if i flash it, does this change anything?

no it will still be unlocked if you flash it.

Oh good, then I can flash it, right now I have some old data from the previous user and I have some problems with connecting to the operator.
E: I am trying out tomal versions right now, but is there as simple as the tomal installer with wm5.0?

Welcome to forums
Have a deep read to the Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and enjoy!

Can I turn off the ActiveSync, so it would not be running when I am not connected to the PC?
Also I was looking at the screen and I saw that couple of millimeters from each side there is black line. So is it possible to switch it to "full screen" or is it normal?
Finally I would like to know how to change the start bar's height and other menu sizes?

For activesync:
To get rid of this, do the following: Start Active Sync on your Wizard, then
Select menu -> select configure Server -> Enter just any name for server - select next - select advance - do not change drop down boxes and select next. Then unselect all check boxes - select finish. Then select menu again - select schedule - For both drop down boxes select Manually. Then push OK button. Now ActiveSync will not restart itself.
Try to use search and read a lot, with that most of your questions will be solved.

[Q] i need wm 6.5 os

hi
my name is shekhar
please get me wm 6.5 to my htc diamond
i want to upgrade from wm6.1 to wm 6.5
please

How to Install or Update your Windows Mobile?
Please Follow Below Orders :
Please Follow Below Orders :
1. you need a PC
2-1. If you have Windows XP -> Setup ActiveSync 4.5 from Here
2-2. If you have Windows Vista or 7 -> Setup Windows Mobile Device Center from Here
3.If you use manufactured ROM(Orginal WM6.1 ROM OR Official ROM) -> Install Touch_Diamond_-HardSPL_OILNEX From Here
How To Install HardSPL on Touch Diamond?
-> After Downloading and Extracting this file
you Must connect your Touch Diamond to your PC with its Cable
Let your PC Connect to your PPC with ActiveSync or Windows Mobile Device Center
Find HardSPL Folder and Run ROMUpdateUtility.exe
At Appeared Windows Page By ROMUpdateUtility.exe Accept Check Box and Click Next Button
Warning : Don't Unplug in Touch Diamond's Cable , Diamond's Battery Must be Charged More than 50%
Then you can see this Message on your PC->"verify the information on your PDAphone...Please wait"
After That you can see Setup Page on your PPC with 4 colors and on the White Color Part ,you can see USB (Notice : You can See Setup Page with Holding Sound Decreasing Button and Pressing Restart Button togather and Release Sound Decreasing Button Until Appearing That Screen)
Clicking Update Button And Next Button After That
And in Finally you can See Two Process Bars are Processing in the Same Time One of them on your PC and Another on your PPC and Restart your Device automatically.
I congratulate, your Touch Diamond Has Been Unlocked now you can install any ROMS That you Want
4. Downloading WINDOW MOBILE 6.5 WITH HTC SENSE 2.5 from Here ( you can See its Pic Here)And Extract this file
5. you Have this folder With two Files CustomRUU.exe And a File With NBH suffix , IF this Folder Dosn't have CustomRUU.exe Download it from Here And Put it to this Folder
5. Run CustomRUU.exe -> Keep Clicking Check Box Button and Next Button until Appearing That Message Again : "verify the information on your PDAphone...Please wait"
6. Clicking Update Button And Next Button After That
7. you can see again Two Process Bars are Processing at the Same Time On your PC and PPC
8. After Finishing ->your PPC Restarts Automatically Again And you Have WM6.5+HTC SENSE 2.5 ON YOUR TOUCH DIAMOND
9. Enjoy. (This ROM Has Been Made And Cooked by donsalari So Much Fast and Stable and Also Really Nice)

Hi guyz!
I have heard it said some of the ROM updates cause some technical failure...like GPS failure or G-sensor....
I wanna ask someone, who have tried this ROM if its ok and will not make any defection!
Thanks in advance!

workes great