Related
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
look in artemis forum, they got the 2.67.9 radio rom in the latest artemis rom. we shoul b able to use it no problem. im willing to try it out 1st if anyone able to extract it.
Radio ROM 02.67.90
rdboyce said:
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
Click to expand...
Click to collapse
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
so did someone try it? i heard new versions were very bad for the battery life, hope this one is better.
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
rdboyce said:
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
Click to expand...
Click to collapse
Is there a G3 version?
Cutefox said:
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
Click to expand...
Click to collapse
I did pull it from the Artemis and I'm redoing it now. You're right it don't work but it doesn't brick. I looked at the size and the Hex Dump of both and they are similar. The Artemis ROM even had the G3 and G4 IPL and SPL when I decoded the ROM. I had so much hope but no go.
I was considering the Excalibur ROM as well but its bigger than the Prophet/Wizard radio ROMs. I'm more apt Prophet/Wizard Radios are usually around 2.5MB. The Excalibur ROM is 2.8MB. Not sure the the dedicated Radio space on the Prophet but the difference is just enough to brick.
I've already decoded it. If some one wants to try the Excalibur I'll post it.
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Confirming the radio rom does not work as well on my S200
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Jesterz said:
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Click to expand...
Click to collapse
I'm the same place after re-extracting it from the Artemis ROM. I'm going to wrap the Excalibur ROM. It'll be posted soon. Anyone wanting to try it, Have fun.
i've changed the header info a bit, but that doesnt seem to help either
Let's try the next ROM
Cutefox said:
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Click to expand...
Click to collapse
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
I do see that the other ROM was removed so...
If you post a G3 radio rom, I can try it on my Qtek S200...
rdboyce said:
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
Click to expand...
Click to collapse
Did anyone try the Excalibur build?
rdboyce said:
Did anyone try the Excalibur build?
Click to expand...
Click to collapse
I'll do a test soon, I'm playing with the new AKU 3.2 ROM and made a clean version.
Radio rom upgrade problem!
I upgraded my s200 RadioROM to 2.63.90. Now my Phone lost Radio Rom and lost the GSM signal. The phone become very slow and con't activesync to the pc. I have try but can't upgrade any other rom now! Can someone help me?
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Thanks very much! My Phone has come back!
GOGULETE said:
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Click to expand...
Click to collapse
Radio 2.63.90 removed.
The Radio 2.63.90 has been removed. It is incompatible the Prophet. I'm going to continue to research these Roms. Thanx for the input.
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
Well, necessary stuff is USPL.
A stock ROM will also be nice.
dont have one (well have one on my phone)... wouldnt know how to get it off the phone either...so ill leave that for someone else
maybe you can post it suracha?
What do we need?
We need help from an XDA-Developer to create USPL for unlock our device so we can flash unOfficial ROM, I have never worked on this.
So far, I can read the ROM from device and play with it. I believe this is at the same progress as GUIGOU's work. BTW, he also hosts his works on the internet. You may review following threads ...
HTC 3470 (Pharos) Orange French Dump
HTC P3470 Pharos : Searching an Backup Rom
In order to play with customized ROM, I also need Official ROM to re-flash my device ... just in case, you know.
I asked htc Asia last week about an Official ROM, they said the device is new, they may release Official ROM in the future but not now.
I think we should talk to an XDA-Developer who ever made USPL for some device. We do need it !!!
Pharos ROM to Create
I've come across this http://forum.xda-developers.com/showthread.php?t=334667
Pharos ROM to Create
I've come across this http://forum.xda-developers.com/showthread.php?t=334667
It is a technique called JumpSPL. Sound good to me for start fooling with my Pharos. (Thank Pof)
quote from the original post says
Notes on patching & testing custom SPLs:
* Disassemble the SPL using radare (free) or IDA Pro (commercial).
* You need to press the bootloader buttons after loading your custom SPL with JumpSPL, otherwise device will reboot. You can also patch the SPL to enter bootloader mode automatically, so you don't have to press the buttons.
* Some devices require that you unplug and re-plug the USB cable after the SPL has been loaded.
* On some devices (TI OMAP) you'll see a white screen instead of the usual tri-color screen, don't worry about that, you're in bootloader mode.
* Use patched SPLs with caution, try to flash splash screens to do the initial tests and avoid bricking your device.
* To know the jump address you can use itsutils 'pmemdump -p' and try to find a copy of the SPL in memory. You can find the virtual address with dumpromx.exe.
I try both bkondisk = http://forum.xda-developers.com/archive/index.php/t-285003.html and pdocread => http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom in order to get my SPL.
Now I am unsuccessfully locating Pharos' SPL...... Worse, I have known of neither Radar or IDA Pro. so That would take a long while until I can convince myself to try the JumpSPL.
Post back if I get any progess.
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.
bita said:
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.
Click to expand...
Click to collapse
Yep, I am thinking about that.
Hopefully, they should have one.
good progress!
I personally am new to the pda thing, but with proper how to's Id like to tinker with the Pharos.
I saw a thread where an older htc was said to have gps built in but not activated... you can do a search but also check this thread http://forum.xda-developers.com/archive/index.php/t-293182.html
so it might be the case that we have wifi and 3g but simply disabled.. just like in the touch (elf)
would be cool if this was the case huh?
Got it
bita said:
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.
Click to expand...
Click to collapse
bita, follow the link to thread ... Official ROM 1.11.707.1
Thank Suracha
U are excellent.
I'll be keep fooling my ROM....
help me please and give me a windows mobile 6.1 for G4 Qtek 9100 device.i've searched the xda section for windows mobile 6.1 but i can't decide what is good and what is bad.
Visit This Link
Men visit this link
http://forum.xda-developers.com/showthread.php?t=427328
I can tell you that roms arent good or bad... in every device we have diferent issues believe me... and everyone can said this is good to me but somebody said its the worst one! why?... cause its their points of view... be sure you have everything to upgrade before do it ok?
good luck.
thanks for the link.i have downloaded from there but i only have an nk.nbf.how can i install this.i know i'm a complete n00b.
Dont said that men!
All of the people you can see as a Senior one day we were noobs hahaha
Search on the brushed metal by noonski ROM in post number 82 i have attached A RUU just copy your nk.nbf to the file unzipped and run the RUU xp if it doesnt works run the normal RUU. in this link:
http://forum.xda-developers.com/showthread.php?t=429327&page=9
good luck... are you sure you are hard SPL? apply it... or make a soft SPL
Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?
Mmmmm
CocoSS said:
Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?
Click to expand...
Click to collapse
Its an old rom but if it is of your likely... first read the way to upgrade in G4 section of wizard forum maybe you miss a step...
Good luck the new ERA of Roms are the included Manila 2D in it... so give it a try is most prettier.
Good luck men.
i've choosen this one because i red that it is very stabile and i pretty need this now.i wil try to read more, but more likely tomorrow i'll try to install it
i've tried to install a new rom on my wizard and i got this error: "This update utility cannot be used for your PDA Phone.Please get newer update Update Utility."my phone enters bootload before giving this error.
sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard
Good work
CocoSS said:
sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard
Click to expand...
Click to collapse
Enjoy it men!!!
it seems my rom upgrade haven't solved one of my major problems.The GPRS connection is not working.I'm connecting to the network (Vodafone) but if i want to browse the internet internet explorer says :"The page cannot be found.Check the name and try again".
Most of roms
Most of roms has this kind of prob, cause the ccokers said that is better to conect via WIFI or USB stills a problem... but you can try and try again
One more thing maybe your carrier Configuration have missing something... acharacter... a number a dot..... i dont know men!
what do you mean about "try and try again "...different rom or what ?
Of course!
Of course men! try a new one when you think it doesnt reach what you want.
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..