Database Users

avoid touch the dailpad when receiving call

hi all,
i would like to know how to make it happen in HD per attached photo" Phone canvas". tks!

can anybody help?

hi all, i really need this to avoid if someone calling and wrongly touch the function key when i take out from my pocket. pls help!

If that's your issue, why not use S2U2?

AndyCr15 said:
If that's your issue, why not use S2U2?
Click to expand...
Click to collapse
Thanks for your reply! Actually, I did use S2U2 on my HD. But it just can prevent I wrongly touch the key to receive a call. I need "Phone Canvas" to avoid to touch the function key "e.g. Mute / Hold" on the keypad during I making / receiving calls. Hope it is clear. Thanks again!

doesnt s2u2 have an option to lock all soft/hard keys?

I find S2U2 so confusing. It is very hard to test also because you have to wait for someone to actually call you before you can see if the settings are as you wish.
Can anyone tell me what settings to use in order to have S2U2 keep my phone locked when I receive a call and let me asnwer the call by sliding ????

What about Answerkeys Disabler.
Beards

Right soft key

I have a problem where no matter how many times i change the program/function of the right soft key in settings>buttons>program buttons it will allways turn back to the default (Today Screen)
I want it to be rotate screen 270 <rotate screen> for my tomtom!!!
The left soft key works fine, it is assigned to <start menu>
HHHMMM???
any advice would be very appreciated!!!

TouchFlo installed???
http://forum.xda-developers.com/search.php

I had the same problem. When I updated to the new ROM the problem is solved.
Thank you,
MTWIZARD

MTWIZARD said:
I had the same problem. When I updated to the new ROM the problem is solved
Click to expand...
Click to collapse
Do you mean the new SE firmware,
btw artesea i am running touch flo, and i did try to search for this problem with many keywords but no luck

Well there must be at least 5 posts on the same subject. ALL with the same answer which is TouchFlo changes the right softkey.

ok i found the answer and it is the is no way to change it when touch flo is installed

The right hand side hard button - this has been mapped to 'HTC Home' as for some reason, the same hardware key on the Blackstone is actually 'Home'. Although this is a problem, some people have requested that I leave it as it is a nice way of going to the home screen. Others want me to try and remove the mapping so it works according to what the softkey above it says. Shall we vote on this?
Click to expand...
Click to collapse
not fair

flext said:
I have a problem where no matter how many times i change the program/function of the right soft key in settings>buttons>program buttons it will allways turn back to the default (Today Screen)
I want it to be rotate screen 270 <rotate screen> for my tomtom!!!
The left soft key works fine, it is assigned to <start menu>
HHHMMM???
any advice would be very appreciated!!!
Click to expand...
Click to collapse
Hey, how did you get the soft key mapped to the start menu?
I used the advanced configuration tool, but it does not show the start menu.
Could you help me out?
Cheers
Jens

the keypad do not work during a call

Hi, here its another doubt...
When i call to the cell phone company to know my credit, the IVR machine answer the call. So, it says: If you need xxx press 1, if you need xxxx press 2, etc etc
The problem its that i cant do nothing during the call!! I press "keypad", "end call", "contacts" etc etc and nothing happends.
The only way to end the call its pressing the no-touchable buttom wich have a "little house"
I really want to know my credit, use the keypad to view contacts or to press 1, 2, 3 etc if i need it!!!!
Someone help me please!!!
Thank a lot!!

Maybe you could map the keypad to a button. On a side note: what ROM are you running?

Hi cmstackar!! thanks for your answer!! im running the original ROM (WM 6.1 in english)
ROM: 1.39.405.2 (47382) WWE
Radio Version: 3.43.25.19
Any idea?
Thanks again!

yemo28 said:
Hi cmstackar!! thanks for your answer!! im running the original ROM (WM 6.1 in english)
ROM: 1.39.405.2 (47382) WWE
Radio Version: 3.43.25.19
Any idea?
Thanks again!
Click to expand...
Click to collapse
Keypad option has always been available in call for me in both 6.1 and 6.5 WWE ROMs
Tony

I dont know what more can i do... Is it posible that the ROM came corrupted or somthing similar?
I m wondering what happends if i upgrade to WM 6.5...
But the cell its new, so, i dont wanna make any changes

Just a thought, does your dialer have a "curtain" that you swipe down to access the keypad button?

Hi Bruce Inman! you help me with another problem!! i hope you can help me in this too!!
Yes, there is a "curtain" but in the screen appears "slide down for more options" (like hold, add call, note, etc) and down this frase appears "keypad" (in the left) and "end call" (in the right)
Recently i turn off the phone for a wile and i CAN use the keypad (i entered to the menu of an IVR machine without any promblem) and slide down the "curtain". I end the call touching the scree in the "end the call". All was OK!!
When i end the call, the phone do not work good for 5 seconds (that happends allwas, i dont know way... after end a call, the phone do not work properly) When the phone came back to normality i try to make another phone call to use the keypad and i returned to the begining!!! I can do nothing touching the screen... no kaypad, no curtain, no end call, NOTHING!!
I hope someone knows the problem to give me a solution!!
Sorry about my english!!! i m loughting wile im writing because everyword i think: "this is no the correct word tu put right here" jajajaj. Please, try to understand me, im doing my best!!
thank you all!!

yemo28 said:
Hi Bruce Inman! you help me with another problem!! i hope you can help me in this too!!
Yes, there is a "curtain" but in the screen appears "slide down for more options" (like hold, add call, note, etc) and down this frase appears "keypad" (in the left) and "end call" (in the right)
Recently i turn off the phone for a wile and i CAN use the keypad (i entered to the menu of an IVR machine without any promblem) and slide down the "curtain". I end the call touching the scree in the "end the call". All was OK!!
When i end the call, the phone do not work good for 5 seconds (that happends allwas, i dont know way... after end a call, the phone do not work properly) When the phone came back to normality i try to make another phone call to use the keypad and i returned to the begining!!! I can do nothing touching the screen... no kaypad, no curtain, no end call, NOTHING!!
I hope someone knows the problem to give me a solution!!
Sorry about my english!!! i m loughting wile im writing because everyword i think: "this is no the correct word tu put right here" jajajaj. Please, try to understand me, im doing my best!!
thank you all!!
Click to expand...
Click to collapse
Love Google translator!
Sounds like an issue with your dialer.
A hard reset or flashing another ROM (assuming you understand how) will fix your problem.

Bruce Inman, i did 2 resets but i dont know if were a hard or soft reset. One was pressing the red buttom and the other was in "start>settings>all settings>System>clear the storage
I know that pressing the red buttom its a "soft reset" but i dont know if the other was a hard reset.
However, today im going to call the seller. If I cant change the phone for a new one, I will try to change ROM
So, the hard reset was OK? First i wanna try that!!
I hope it is resolved soon! thank you all

Hey, one question... i think that the problme is the application "phonecanvas". Can i reinstall? where can i find this program form the Diamond 2?
Thank you

yemo28 said:
Hey, one question... i think that the problme is the application "phonecanvas". Can i reinstall? where can i find this program form the Diamond 2?
Thank you
Click to expand...
Click to collapse
http://www.mediafire.com/?mtimtedtmz4

fighter7139 said:
http://www.mediafire.com/?mtimtedtmz4
Click to expand...
Click to collapse
Thanx fighter! i will try it!!

yemo28 said:
Thanx fighter! i will try it!!
Click to expand...
Click to collapse
Didn t work!

yemo28 said:
Bruce Inman, i did 2 resets but i dont know if were a hard or soft reset. One was pressing the red buttom and the other was in "start>settings>all settings>System>clear the storage
I know that pressing the red buttom its a "soft reset" but i dont know if the other was a hard reset.
However, today im going to call the seller. If I cant change the phone for a new one, I will try to change ROM
So, the hard reset was OK? First i wanna try that!!
I hope it is resolved soon! thank you all
Click to expand...
Click to collapse
Yes, the red button is a soft reset, clear storage is one way to hard reset, you can also power the device off, turn back on with power button and immediately hold both volume keys until you get the white screen, then follow the instructions.

I just finished updating the ROM (to original one), specifically this: http://www.htc.com/sea/SupportDownload.aspx?p_id=249&cat=2&dl_id=555
Before, I had this: http://img40.imageshack.us/img40/4181/screenhunter01feb201952.gif
But the problem when picking up a call with the slider bar, continuous ...
I think the issue of keypad when communicating, for ex with an IVR, improved but not much!
Someone knows what else can I do?

yemo28 said:
I just finished updating the ROM (to original one), specifically this: http://www.htc.com/sea/SupportDownload.aspx?p_id=249&cat=2&dl_id=555
Before, I had this: http://img40.imageshack.us/img40/4181/screenhunter01feb201952.gif
But the problem when picking up a call with the slider bar, continuous ...
I think the issue of keypad when communicating, for ex with an IVR, improved but not much!
Someone knows what else can I do?
Click to expand...
Click to collapse
Go to Settings\Personal\Phone and make sure Keypad is set to long tones, see if that helps. Also try short tones if not.

Recently i tired but didnt work!! im going creazy!!!
Which application or software manage the interfaz during the communications? I think that the process or application that manage the communications its the problem!!
Anybody knows another choice?
Thank you all angain and again!!

yemo28 said:
Recently i tired but didnt work!! im going creazy!!!
Which application or software manage the interfaz during the communications? I think that the process or application that manage the communications its the problem!!
Anybody knows another choice?
Thank you all angain and again!!
Click to expand...
Click to collapse
Interface is phone canvas.
Sorry I do not know what your issue is.

Its ok Bruce, i know you try to help me. This is all that matters!
I give up with this issue!! I ll try to change the phone...
Thank you all for your help!!
yemo28

No Touch Flo 3D

Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks

calsi said:
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
Click to expand...
Click to collapse
Open your start menu, select "settings". On the first tab, choose "Today"
On the next screen, choose the "items" tab, and then you'll see a checkbox in the list for TouchFLO 3D, just check that, then hit "ok" to exit. When you return to the home screen, you should have TF3D back.
This is the method to turn TF3D on/off when you're doing things like installing cabs that change the look of TF3D in any way.

Touch FLO 3D Back again
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.

calsi said:
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
Click to expand...
Click to collapse
Glad to help!
Yes, any time you run cabs that change the appearance at all, it's always a good idea to turn TF3D off first, just to make sure there's no issue with the cab accessing files etc that it needs to modify.

[Q] Program buttons?!?

Hey guys..does anyone know what the program buttons do ?i tried to map some programs to it and nothing...

I'm sorry I don't understand your question, which program buttons do you mean? The ones on the home screen or otherwise?

Probably the personalised buttons. Which is not available in HD mini.

yeah i thought so too,reminded that this was working on my old p3600 and i could asign actions for those buttons,btw does the endkey replacement working for u?

The end key long press that brings up the quick list works fine.

not the original one..i mean the endkey replacement v 4.5,or if u can tell me pls if u know a way to replace the long press endkey with a programs tab.

Keyboard sound
Hello there,
Do you have any idea how can we turn off the keyboard sound when dialing without turning off also the incoming message alert ?
Thanks

Settings-More-Phone
There is an option for keyboard.

fighter7139 said:
Settings-More-Phone
There is an option for keyboard.
Click to expand...
Click to collapse
Thanks but on my phone supplementary from settings I have all settings and there is no phone tab or icon. Where should it be ?

I don't have english menu.
Tell what do you see, when you select "all settings"?

fighter7139 said:
Settings-More-Phone
There is an option for keyboard.
Click to expand...
Click to collapse
Thanks I found it !: settings-all settings-personal-phone-keypad must be set to off.
tnx Fighter7139

Sorry, for some devices, "Phone" is inside Personal, for some others is outside.

Thanks fighter7139