Hello. I've searched for my problem, but could not find anything.
I recieved my HD2 today, and when I connected to my PC (USB), Windows installed its Mobile Device Center.
But then nothing. WMDC says Not Connected when I plug the phone in and select ActiveSync.
Using Win7 32bit 7100.
What did you select on your device to connect as? ActiveSync, USB Drive?
ActiveSync. When I select the USB Drive option, the mediacard shows up on the computer as it should.
I'm having the same problem. I'm using Windows 7 64 bit, and it seems my HD2 is not a recogizable device. Thus it never gets connected in Windows Mobile Device Center. In Control Panel->Devices it is shown as "Generic RNDIS".
I'm guessing I need to find the correct drivers, but have been unsuccessful so far :-(
I also use Windows 7 x64 on a few machines and it works OK for me (even in Linux too). You might have a firewall or Anti-virus that is blocking the virtual port used in the connection. The usual culprits are Symantec/Norton and someone mentioned AVG recently.
Temporary disable your firewall/Anti-virus and plug in your phone see if it works then. If it does then you know what was causing the problem
I don't run any firewall or antivirus.
I also checked around, and it seems that it installs itself as Microsoft Windows Mobile Remote Adapter.
I also noticed that WinMo6.5 isnt listed on the supported OS list for WMDC.
Go to the USB to PC tab in the connections page, off the all settings options,
then disable ebnable faster data synchronisation,
that normally works.
Bloke
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure you do a windows update for Windows 7. Had the same until I ran windows update.
I'm up to date.
I can connect my HD2 in windows 7, but when i download and run the SMS hotfix it gives me 'this is not a valid win32 application'
Dracoster said:
Hello. I've searched for my problem, but could not find anything.
I recieved my HD2 today, and when I connected to my PC (USB), Windows installed its Mobile Device Center.
But then nothing. WMDC says Not Connected when I plug the phone in and select ActiveSync.
Using Win7 32bit 7100.
Click to expand...
Click to collapse
For me helped to install mobile device center again. I had same problem at first.
I've done that.
Here's what Event Viewer is telling me:
Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop.
Also, when i check the new Network connection when using the Microsoft Windows Mobile Remote Adapter, I see "no network/internet access".
I had the same issue after a few weeks of using the phone... There were a couple of devices in device managed under network adapters I believe which I deleted. I then plugged the phone in again and selected active sync and all was fine again once the devices had re installed. Sorry Im not with my pc at the moment so not sure what they were called.. Think it was to do with the phone passing an internet connection to the phone etc etc...
kanesw said:
I can connect my HD2 in windows 7, but when i download and run the SMS hotfix it gives me 'this is not a valid win32 application'
Click to expand...
Click to collapse
It's not meant to run from your PC. Copy it onto your phone and run it from there.
bloke said:
Go to the USB to PC tab in the connections page, off the all settings options,
then disable ebnable faster data synchronisation,
that normally works.
Bloke
Click to expand...
Click to collapse
Thx! It worked for me!
i was having the same problem (though with vista) until i went to the activesync app on the phone (start menu -> extra) then it started working as expected (showing hd2 in 'my computer' & giving acces to both sd and phone mem)
I can now happily report that a format of the PC fixed the problem.
This is a really annoying problem - it's hit me on 2 separate machines (laptop and desktop) - running Windows 7 64bit and 32 bit. Both machines worked fine on Vista before they were upgraded to Windows 7.
For some more information on possible "fixes" - see http://www.windowsphoneexpert.com/Connection/forums/t/3643.aspx and http://social.microsoft.com/Forums/en/windowsmobileactivesync/thread/3139b9ba-1038-4fce-858b-0f305df68a5a plus a whole lot of other posts on the microsoft forums.
Looks like a frequent problem which can be either dead easy or impossible to fix. In my case, it was impossible as the drivers failed to load, irrespective of the USB-to-PC status, whether WMDC was re-installed, and even which HTC device I used - TYTN (WM5), Polaris(WM6.1) and now Leo(WM6.5). Tried the hard reset (while doing Leo Rom upgrades ) and manual update of drivers. All for nada...
I don't know if I can face formatting my PCs - that seems excessive and is not guaranteed to solve the problem anyway judging from the 2 machines I've got here.
Related
Hi guys...
Can anyone tell me how to share/access files present on my hard drive so that I need not copy the files to my PPC. I did not mean " Activesync"
I probably remember someone by name "KARIM" who had mentioned about this in one of the imate forums. but I don't remember where it is now. He explained about installing the widcomm bluetooth stack & then having resco explorer 2003 installed. u can create a network share & map ur hard drives and access files on pocket pc. that would be rocking... u don't have to copy ur images/music to ur PPC. u could play them thru bluetooth at a decent speed.
can anyone help me out on this. It would be highly appreciated if anyone could give step by step instructions on how to go ahead with this.
I am having Widcomm Bluetooth stack installed from xda forum & I am using TDK Bluetooth Adapter. I have even resco explorer installed. I have updated my ROM to 1.11 WWE
awaiting for ur earliest reply.
Thanks & Regards
Iffu
Hmm ok, I think you are trying to do what I have done...
I can access the HDD on my Desktop pc from my XDA/i-Mate over a BT link.
The HDD on my desktop is shared out across the network, and the shared drives can be accessed by the PDA, using resco you can map network drives to the PDA and voila the drives are there.
This took me about 3 weeks to get running. The problem is My solution will probably be no good to you as it involves using my server which has Win Server 2003 on it and the solution involves using network address translation to the bluetooth network.....
I can hope fully give you some pointers though.
You need The widcomm stack on your mobile device as the pathertic MS builtin stack does not support the required profiles.
Get the widcomm stack installed and working ok, install the BT dongle and software on your desktop pc as well, you may get a network connection error icon on your desktop pc system tray. this is because the bluetooth network is off.
we are interested in the 'Network' profile (not the PAN profile), make sure the network access profile on the Desktop is enabled, create a paring to the desktop using widcomm stack, and the 'connect to a network' icon, the desktop pc will probaby ask for permission to connect. ( here is a major annoyance - you can select a checkbox that says ' always allow this connection' (or similar) this only works until the desktop pc is rebooted, after a reboot you will need to give permission again!! Since my server is very rareley rebooted it does not cause me a major problem - but if you find a way round it please let me know!)
Your desktop pc should report that the bluetooth network is now connected.
disconnect the connection, but you should now have a shortcut on your PDA in widcomm connection manager to the network connection.
Now for the tricky bit. If your Desktop is part of a network it gets difficult. if not it's easier...
We need to setup some ip addresses for the BT Lan. Decide on some ip addresses. you need one for the desktop and one for the PDA. (eg 192.168.0.50 & 192.168.0.51 mask=255.255.255.0)
On the desktop configure the ip address on the 'Bluetooth network' lan connection as you would any other lan card
On the PDA goto start/settings/connections (TAB)/connections/advanced (TAB)/network card - in the box labelled 'tap an adapter to modify settings' select Bluetooth PAN user driver' (if this is not here, your widcomm is not installed correctly) .This is where you put in the ip config for your BT network on the PDA
Now connect the BT network link again (Widcomm BT manager)
You should be able to ping your PDA with it's BT ip from your desktop, if it works, your BT LAN is now working. ( you can also get some free ping software for the PDA too, to test the other direction do a search for vxutil)
if the pings work ok, load up Resco and tell it to map a drive, hopefully the Desktop and it's shared disks should appear.
Let me know how you go...
icarusbop said:
You need The widcomm stack on your mobile device as the pathertic MS builtin stack does not support the required profiles.
Click to expand...
Click to collapse
where do I get it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The widcomm stack has been posted several times in these forums: Do a search on widcomm, and you should be able to find them.
icarusbop said:
The widcomm stack has been posted several times in these forums: Do a search on widcomm, and you should be able to find them.
Click to expand...
Click to collapse
Thanks for your explanation!!!
hmm but i think it's to many work :? i've got BT finally workt on my M500 for a few weeks now and don't wanna mess up with the widcomm drivers
maybe in the future with another Rom and maybe WM5 there's a better solution
The widdcom stack does not work on the mini.
U can try the bluesoleil stack... it has many profiles ( PAN, OPP, SYNC, LAP, DUN, FTP, FAX, HID, SPP, HCRP, BIP, Headset, AV ).. and it works on the mini.
http://forum.xda-developers.com/viewtopic.php?t=18537&sid=889e812b8178ab1d0dc8740a39dffb43
very nice icarusbop... :wink:
cheers
Underworld said:
i've got BT finally workt on my M500 for a few weeks now and don't wanna mess up with the widcomm drivers
Click to expand...
Click to collapse
does the M500 has a widdcomm bluetooth stack???
duke911 said:
Underworld said:
i've got BT finally workt on my M500 for a few weeks now and don't wanna mess up with the widcomm drivers
Click to expand...
Click to collapse
does the M500 has a widdcomm bluetooth stack???
Click to expand...
Click to collapse
huh? what do you mean?
no i don't think that it's standard if you mean that.
i mean if i set up the widcomm drivers maybe my BT is going to failure, it cost to many work to get it back on again... :?
it workt on my M500 in combonation with the Sitecom BT stick and the new drivers, so no wiodcomm drivers are been used
Hi i was just wondering if the camera on the front of the device can be used as a webcam while on msn messenger?Or if perhaps in some way it could be modified.It'd just be a cool thing to have when your away!cheers
if you mean a webcam for your pc then do a search for webcam in the forum because the universal would as much possible to act as the role of webcam as any other htc device with a cam
No i mean a webcam in itself.Since it will be capable of 3g calls i see n reason reason why i couldn't,in some shape or form be a webcam in itself while on msn on the ppc.Perhaps with some tweaking,i don't know just a question
oohh ok well does messenger pocket support webcams at all ?
i dident think it did
if it does it just need to support the htc cam
with ms portrait they dident support htc cams
if it does not support webcams then maybe in a future version
theres no options for it i can see, shame tho, i use jasjar alot on wifi and it could have so much potential for msnm
maybe in the next version
Carnivor said:
theres no options for it i can see, shame tho, i use jasjar alot on wifi and it could have so much potential for msnm
maybe in the next version
Click to expand...
Click to collapse
As first step have a look at http://www.zone1.de/PocketPC/LxCam.html
LxCam is working with MDA pro / HTC Universal.
Conclusion: HTC camera was found.
Wi-Fi-streaming is ok, but slow.
Greetings. Gerd Dubrand
cant open that page afaik
Carnivor said:
cant open that page afaik
Click to expand...
Click to collapse
Try again without tailing point: http://www.zone1.de/PocketPC/LxCam.html
Greetings. Gerd Dubrand
soz but i think you got the wrong end of the stick there,
agreed that is good and has it been successfull on the universal?? if so im gonna grab that baby!!!!!, If im correct that app is used to use the universal "AS" the webcam for a desktop pc, for use in msnm etc, but im on about pocket msnm actually on the phone, using the webcam within the phones version, surlly that is a big oops by M$ specially as theyre charging for the upgrade to the version on the universal
argh, to many different versions of the same thing!
Doesn't work on my JasJar. It complains: "Error opening HTCcamera.dll" or something along those lines.
it works on mine mda pro.
It uses the 1.3MP camera instead of the Cmos one..
And the screen is upside down on the pc, and i must hold the camera also upside down to get a straight picture.
its a great app !
It's a shame it cannot be used as a webcam in pocket msnm.Would be a great feature
LxCam Special-Edition for MDA Pro / HTC Universal arrived via mail from author. No more problems with upsidedown. Videostream via WLAN, have a look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: http://www.virtual-gadgets.com/download/LxCam1.01.exe (Update 2005-09-24: this is the MDA Pro- / HTC Universal-SpecialEdition)
Greetings. Gerd Dubrand
I am hoping they are working on an API that will allow the second camera to be used as a webcam. I know MSN Portrait supports that on previous PPCs that had to have an camera installed via SDIO/card, so I don't see why it wouldn't be able to do the same with a built in cam
Bran1722 said:
I am hoping they are working on an API that will allow the second camera to be used as a webcam. I know MSN Portrait supports that on previous PPCs that had to have an camera installed via SDIO/card, so I don't see why it wouldn't be able to do the same with a built in cam
Click to expand...
Click to collapse
I e-mailed them and asked about future support. The reply was
" Thanks for your support. We may support windows mobile 5.0 in near
future."
So let's keep our fingers crossed. This would be the killer app.
videolan
Did someone tried http://www.videolan.org/vlc/download-wince.html ? it's a really really good video/music player (ogg included) and can stream videos over the network.
GPL software
Dubrand said:
Carnivor said:
cant open that page afaik
Click to expand...
Click to collapse
Try again without tailing point: http://www.zone1.de/PocketPC/LxCam.html
Greetings. Gerd Dubrand
Click to expand...
Click to collapse
Also perhaps http://www.zone1.de/PocketPC/index.html#webcam
Any bode know if there are something new in about webcam on JasJar
Turn your new HTC pda into a webcam!
Turn your HTC PDA into a webcam
(a little slow and not as good quality as internal video, but still a neat little trick)
Note **** This is a trial version for 14 days ****
1. Download the following files
http://www.virtual-gadgets.com/download/LxCamView.exe
http://www.virtual-gadgets.com/download/LxCam1.01.exe
2. Copy LxCamView to the desktop computer and make a shortcut
3. Copy LxCam1.01.exe to the pda and make a shortcut
4. On Desktop/server, configure the firewall appropriately: add a TCP service with IP address of the Pocket PC (or internal lan or allow any device) with port number 4444
5. Start Wifi or Activesync Connnection
6. Start LxCamView on the desktop computer
7. Start LxCam1.01.exe on the pda
8. Select tools, then select ip address, enter ip address of pc/workstation,select ok
You should see the image!
On Pocket PC, setting HKEY_LOCAL_MACHINE\SOFTWARE\Zone1\LxCam\Rotate to 1 rotates the picture by 180 degrees
He also has a great photo app that takes pictures with the pda camera and auto ftp's them to your web site... The photo app was cheap and works well on my jasjar, pda2k and my son's hp6315.
Check out this developers web site for more info
http://www.zone1,de
and no, I don't have anything to do with this web site or developer; I just thought he had a couple of good apps....
Does this work as a webcam for MSN? I know there used to be an app that did it for other PPCs, but that it didn't work for MSN.
Hi everybody!
Did anyone ever try to use there PPC as a webcam? Well I have and I have a working Thread right HERE!
Introduction of the program and it's called: Ateksoft WebCamera+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WebCamera Plus key features:
- Transforms your PDA or Smartphone to high-resolution web-camera.
- NEW!! Use your PDA/Smartphone as microphone! Even through Wi-Fi!
- Can work through any connection: USB ActiveSync, Wi-Fi, Bluetooth, GPRS, 3G, LAN.
- Compatible with almost all modern Smartphones and PDAs.
- Can be used as web-camera in many programs: Skype, MSN Messager, Yahoo Messager, Virtual Dub and many others.
- Can capture device screen and transmit video to Desktop PC.
- Confirmed working on Windows VISTA (Tested by myself with the HTC Herald)
Howto Install:
1. Connect your ppc to your PC with ActiveSync
2. Launch the .exe file and follow the steps
Howto with ActiveSync Connection:
You can use USB or Bluetooth for ActiveSync connection.
* Establish ActiveSync connection between mobile device and desktop computer.
* On desktop PC start video capture program, and select "WebCamera Plus" video device.
* After few seconds you should see picture from mobile device camera on desktop PC.
* To disconnect press left soft-key or center of joystick on mobile device.
Howto with Network Connection:
You can use Wi-Fi, Bluetooth (PAN-profile), GPRS/EDGE/3G or LAN for network connection.
* Establish network connection between mobile device and desktop computer.
* In WebCamera Plus open "Settings" dialog (Menu->Settings) and reset "Auto detect IP" flag.
* Enter network address of desktop PC in "IP-address" field.
* On desktop PC start video capture program (Windows Movie Maker for example). In video capture program select "WebCamera Plus" video device.
* To begin connection press left soft-key ("Start") or center of joystick on mobile device. After few seconds you should see picture from mobile device camera on desktop PC.
* To disconnect press left soft-key or center of joystick on mobile device.
You can download the trial here
I know this program and it is really nice. A wireless webcam for ......
..... ok not freee but not such expensive. and it works fine after you have reached to set it up.
But great walkthrough...
gThx
yeah, I have tried this program ... and its kind of pointless ...
unless you have a hot girl taking a shower or changing at your apartment and you leave it in there in a corner..... besides that, its kind of pointless! hahahah
ahh but if you launch a vpn connection, then you can follow your phone anywhere.. e.g you let your girl borrow you phone or if you left it somewhere, you can "see" where you left it.
Yeah, it'll probably be at the bottom of her purse while she's getting it from some dude. \
But if you wanted to spy on someone, you should check out flexspy or something like that.
haha i dont know about all that spying but i used it because i dont have a Webcam for Windows Vista HAHAH
when you have an exgirlfriend like mine ... you need such as this ... including but not limited to GPS ankle bracelets, a contact in the CIA, FBI, NSA or any of these so you can track her with satellite..... etc...
Ayerthon said:
Hi everybody!
Did anyone ever try to use there PPC as a webcam? Well I have and I have a working Thread right HERE!
Introduction of the program and it's called: Ateksoft WebCamera+
WebCamera Plus key features:
- Transforms your PDA or Smartphone to high-resolution web-camera.
- NEW!! Use your PDA/Smartphone as microphone! Even through Wi-Fi!
- Can work through any connection: USB ActiveSync, Wi-Fi, Bluetooth, GPRS, 3G, LAN.
- Compatible with almost all modern Smartphones and PDAs.
- Can be used as web-camera in many programs: Skype, MSN Messager, Yahoo Messager, Virtual Dub and many others.
- Can capture device screen and transmit video to Desktop PC.
- Confirmed working on Windows VISTA (Tested by myself with the HTC Herald)
Howto Install:
1. Connect your ppc to your PC with ActiveSync
2. Launch the .exe file and follow the steps
Howto with ActiveSync Connection:
You can use USB or Bluetooth for ActiveSync connection.
* Establish ActiveSync connection between mobile device and desktop computer.
* On desktop PC start video capture program, and select "WebCamera Plus" video device.
* After few seconds you should see picture from mobile device camera on desktop PC.
* To disconnect press left soft-key or center of joystick on mobile device.
Howto with Network Connection:
You can use Wi-Fi, Bluetooth (PAN-profile), GPRS/EDGE/3G or LAN for network connection.
* Establish network connection between mobile device and desktop computer.
* In WebCamera Plus open "Settings" dialog (Menu->Settings) and reset "Auto detect IP" flag.
* Enter network address of desktop PC in "IP-address" field.
* On desktop PC start video capture program (Windows Movie Maker for example). In video capture program select "WebCamera Plus" video device.
* To begin connection press left soft-key ("Start") or center of joystick on mobile device. After few seconds you should see picture from mobile device camera on desktop PC.
* To disconnect press left soft-key or center of joystick on mobile device.
You can download the trial here
Click to expand...
Click to collapse
Is there anyway to use this for free, a hacking or something??
misael22 said:
Is there anyway to use this for free, a hacking or something??
Click to expand...
Click to collapse
You should take a look at the forum RULES
11. No Piracy
We don't tolerate piracy facilitated through this board. What you do in your own time is your business, but this is a publicly used resource and we don't want to be threatened with legal action. Please, use common sense and respect the forum, its users, and those coders that write great code.
Well Duprade,
I queyt (hope i spelled it right) disagree with you..
I have some friend's who doesn't have a webcam but are chatting alot with MSN Messenger ( Windows Live in this case ).
I've asked them if they want a Webcam and all said yes.. so i installed a program on their pc wich is much like this one but called different..
dont know what's the name anymore..
And since then they are useing their phones
they are pleased with it really.. and i too dont have a webcam but i do have a Herald and im gonna use this program instead of my own pre-made program.
but oh well.. im not that much on MSN tho.. so....
But anyway.. Nice Program.. Keep up the good work..
Oh and BTW duprade.. i kinda regonize you from something.. did you were on the BBC one time..?
maybe there is a version and maybe the author of this thread knows more about -
we will not make it public here.....
hope you understand the rule No11. warez will kill this forum
ElProempie said:
Oh and BTW duprade.. i kinda regonize you from something.. did you were on the BBC one time..?
Click to expand...
Click to collapse
what? BBC? what are you talking about?
Has anybody tried Microsoft portrait? I tried long ago and it was crawling on my wing, so gave up. I see there is a new beta now.
WebCamera+TouchDual
hi...does it work with my touch dual(niki)??
HTC Polaris
Hi there,
Thank you for this software. I just tried it on to my Polaris, and my screen stays black, whatever I tried or change in the panel menu...
Seems it doesn't work onto Polaris ? Or I maybe missed something ? (A bit difficult to fix it during the very short trial period)
How does it work with Vista?
Vista doesn't support activesync anymore (built in). On my Herald I have the program running and on my laptop the program is searching for a connection. My Herald is connected through USB.
Can anybody help me with this? Are there some preferences yet to choose?
No go on Polaris
My Polaris does not show anything either, it does not initiate any of the sources. Any ideas? Thank you.
Hello there! quick question here:
I have 2 ppc here (my old wizard and a hermes). I know that there is programs that makes your ppc turn into a webcam, but in case I want to go further in the spy (or whatever) thing... and want to broadcast the images made from the cam of one ppc (for exemple the wizard) into the other (the hermes). Is there such "webcam viewer" for ppc?
I used something similar to this at one point, maybe this exact thing. Its really nice and useful =]
video calling
Does anyone know how to use this program or any other one to enable video calling on PPC cell phones like on my Sprint HTC Mogul?
I put the trial version of this program on my Sprint HTC Mogul and it work well for webcam. The program also says it can turn phone into a microphone too. But I can't get any sound to transfer to the computer. I checked out all the setting in my computer and on my phone. The webcam program does not have any settings for sound other than checking the sound option under: Menu-->Source. Does anyone know what to do here to get my Mogul to send sound to my computer using this program? Thanks.
Easy to use Usenet Client for Windows mobile. Download directly from Usenet to your mobile device.
Download Nzb Mobile
Update: Version 2.0
Download from Usenet using 256-bit SSL encryption, protected your username/password and make your traffic over open internet connections private. Configure multiple Usenet servers. Use your free ISP Usenet server (using Wi-Fi) at home and your pay Usenet server on the go (HSDPA, 3G). Choose a different server in different countries when you travel.
License model has changed since version 1.4. There is now a trial version (no enddate with download size limitations) and a full product version.
Update: Version 1.4
This new version has better performance and extended list features. It also fixes some connection issues and is more finger friendly.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Nzb file support
SSL Support
Multi server configuration
File Explorer integration to handle nzb files
Extensive logging
Finger-friendly UI
Detailed post info with file extension display
Multiple connections for faster downloading
Decoding: yEnc, UUE support
Cyclic Redundancy Check
Supports QVGA, VGA and WVGA
Requirements:
Windows Mobile 5, 6, 6.1 (with touchscreen)
.NET Framework 2.0
Internet access
Usenet account
For more info check the website http://www.nzbmobile.com
I've been looking for one of these! I'll definitely be trying this out.
looks really awesome.
One clarification: does this repair the files too?
This is really going to get my service provider jump to the roof.
Works great, First used v1.3 on my diamond, this was not usable (crashes)
but 1.4 works like a charm.
btw also tested on a Omnia (WQVGA and this also works)
I got the following error
Error:System.Net.Sockets.Socket
I am trying to use astraweb.
Thanks
Never mind it was because it was a secure server
normal one works fine
Can we use SSL? With nzb mobile or any other tunnelling software like stunnel on win? Because my news provider use only snntp.
foxvengeor said:
Can we use SSL? With nzb mobile or any other tunnelling software like stunnel on win? Because my news provider use only snntp.
Click to expand...
Click to collapse
Not yet. But stay tuned!
OMG this is awesome, just knew this today, hopefully intergrade some search from binsearch.
That will be all
NICE man this is lovely i didn't even try it out yet just lookin at the pics i think i'm goin to be in love nice man thanks
this really makes me wish i had 3g on my phone now
town229 said:
OMG this is awesome, just knew this today, hopefully intergrade some search from binsearch.
Click to expand...
Click to collapse
yea after using it that would be great this would be great for gettin music on the go definately don't wanna download movies using this unless your using wifi it doesn't work to bad using a edge connection
but binsearch intergration would be great
thanks again for a great app will you be increasing the amount of connections i know with giganews you can do at least 20
wait, it doesn't work with NetFramework 3.5?
Keland44 said:
yea after using it that would be great this would be great for gettin music on the go definately don't wanna download movies using this unless your using wifi it doesn't work to bad using a edge connection
but binsearch intergration would be great
thanks again for a great app will you be increasing the amount of connections i know with giganews you can do at least 20
Click to expand...
Click to collapse
Well it is still a mobile phone, not a desktop pc. Increasing the number of simultaneous connections, will increase the number of processor threads. There are limitions to the number of threads that can be run on windows mobile. But who knows, the new chipsets are getting faster and new versions of windows mobile are coming out. For now 4 connections are enough to get the max speed for most mobile connections out there (3G, HSDPA).
sid0101 said:
wait, it doesn't work with NetFramework 3.5?
Click to expand...
Click to collapse
It should work just fine with .net framework 3.5.
4 connections ... 6 must be better or 8 max... For wifi connections around the city and slows NNTP servers.
I have been looking for this type of application for a couple of years now. Works great on my pro, and I love it. Integration with a search engine would be downright perfection. Either way thank you kindly for the app.
sweet! thanks mate
I'm also using SABNZBD+ on my NAS at home - it would be great if I could use my mobile phone to initiate the download.....
I know such an app is available for the IPhone but not yet found one for winmo.
GoMobile said:
Well it is still a mobile phone, not a desktop pc. Increasing the number of simultaneous connections, will increase the number of processor threads. There are limitions to the number of threads that can be run on windows mobile. But who knows, the new chipsets are getting faster and new versions of windows mobile are coming out. For now 4 connections are enough to get the max speed for most mobile connections out there (3G, HSDPA).
Click to expand...
Click to collapse
ahh i get it now it makes sense i mean for me to be using edge it's still pretty fast just grab a couple of songs
but binsearch intergation would be really hot
Awesome stuff! I got PAR2 code lying around here somewhere... maybe I can get it to recompile for WM.
Great application, I'd like to see an "auto import" folder for the next version
I can't Sync MY HD2 with windows 7 in WINDOWS MOBILE DEVICE
it connect so long and it show error ,so i can't get my contact from outlook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS. I'm already instal .net framework v3.5 full and all windows update !
so how should i do to fix this problem ?
What version of Outlooku do you have? Maybe beta 2010?
Petulinek said:
What version of Outlooku do you have? Maybe beta 2010?
Click to expand...
Click to collapse
Does this HD2 not sync with beta 2010?
snerkler said:
Does this HD2 not sync with beta 2010?
Click to expand...
Click to collapse
Not properly no. Windows Mobile Device Center doesn't work properly with it.
madindehead said:
Not properly no. Windows Mobile Device Center doesn't work properly with it.
Click to expand...
Click to collapse
Crap, that's the only office suite I have on my laptop. Is there likely to be a fix soon, or will it not be until 2010 is officially launched.
I'm sure while looking through videos of the HD2 on youtube I saw that someone had 2010 Office mobile beta on their HD2, would this not sync with the 2010 beta on my laptop?
My microsoft office is version 2003 ^ ^
I had some problems with syncing as well. The solution for me was to restart both the HD2 and my computer. This might be a strait forward thing, but hey, maybe you forgot about it.
I also run on Windows 7 but my Outlook version is 2007 and that works fine.
Reinstalling Windows Mobile Device Manager is always an option or try using the Windows Updates and Office Updates.
I've the same problem of McCloy only on Desktop... if I use the sync with laptop (with windows 7) I haven't any kind of problem.
Also not synchronizing...
My Windows 7 with Outlook 2007 shows similar problems:
I can´t synchronize it, but I have access to the phone´s store via Windows Explorer. Weird...
MarioDJNaro said:
I've the same problem of McCloy only on Desktop... if I use the sync with laptop (with windows 7) I haven't any kind of problem.
Click to expand...
Click to collapse
REALLY ? lol i have a friend with my problem, i thought i have only one that have this problem,but in laptop i don't test yet with my hd2 so i try to find the solution to fix this problem!
T_T
I have had same problem with Office 2010 CTP and also Beta x64, x86 is working fine. Also not sure why, I need to turn off my firewall (eset smart security). Windows firewall is not a problem ...
WMDC does not work with Outlook beta 2010 64bit
As my subject says... WMDC will not work with the 64bit beta version of Outlook 2010. Its the 64bit that is the issue.
This is an OLD issue and its been around since the first 64bit Outlook 2010 was 'released'.
Office 2010 is slated for release in June 2010... so Microsoft has plenty of time to either fix the issue with WMDC and 64bit Outlook OR release an entirely new sync'ing product (at MIX10 which is being held in March 2010 and thats where Windows Mobile 7 will be debuted)
[EDIT] Just to make it totally clear...
WMDC *will* sync with Outlook 2010 32bit running on Windows 7 32bit
WMDC will *not* sync with Outlook 2010 64bit running on Windows 7 64bit
FYI, no problems syncing with Outlook 2007 on Windows 7 Professional x64
This is a well known problem with multiple so-called "fixes" none of which work for me. I've tried all of these fixes and WMDC can't sync with any of my HTC phones - including the TYTN, Polaris or HD2.
I'm using Windows 7 x64 with Outlook 2007. I don't think it's an outlook problem, its a Windows 7 driver problem as I can't seem to get the drivers to install properly.
It syncs perfectly well for me on Windows 7 with MS Office 2003 ( never use MSO 2007 and above as I find is too "detailed and greatly inflated software _" ; the old and trusted old version is good enough for me
I am running Windows 7 and office 2010 (from microsoft)
I have no problem sync'in at all.
scooby8272 said:
I am running Windows 7 and office 2010 (from microsoft)
I have no problem sync'in at all.
Click to expand...
Click to collapse
Yes - but the problem is with Office 2010 64 bit and WMDC. Office 2010 (32 bit) works just fine with Windows 7 32 or 64 bit. It is WMDC that is the issue - it has not been updated to communicate with Outlook 64 bit. It still works fine with 32 bit Outlook - any flavor.
Hi, i am not a technical but i searched the net and i found the following solution :
WMDC wouldnt even run or Install, i should say, even though there was a setting portion in Control panel for it.
I found a article about how It wont run without running windows media player first. ( fresh Install and never ran it yet) So I went to run it only to find out It didnt exist.
I'm running Windows 7 Ultimate N which didnt have any Media Software included. ( Didnt know that) So, I downloaded the whole media pack and installed. then I ran media player once and Voila! All the phone drivers installed properly, WMDC Installed properly, Phone connected and sync'd.
http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx?displang=en&qstechnology
Please check that and me us to do it properly. My Regards,,,
Well, I'm also having trouble syncing my HTC HD2. And now I tried it using different computers, one with Win 7, Office 2007 and WDMC 6.1 and other with Win XP, again Office 2007 and ActiveSync 4.5. And niether works. With Win 7, It kind of starts syncing, but nothing happens. With XP, again, starts syncing and then after cheking changes it just says contacts 0/188 and nothing happens.
Can anyone suggest anything?