Related
I hope someone can help me. My new xda exec will not detect wifi anywhere. I can get it to work when sync lead to my laptop but I just found out it is routing to my laptops network connection. I have gone through all the settings and cannot find anything wrong it just keeps on saying scanning network
Hi Simba1623,
I'm new to XDA's but have been playing with WiFi networks for a while.
So i'll have a couple of guess's :wink:
Is the router broadcasting its SSID ?
Do you have spare IP's available ?
Have you added the MAC address if you've got MAC flittering switched on ?
All are common causes for devices not finding the network.
Thanks for responding. The id issue is sorted as when I first setup the xda it did work and asked me for password and worked fine. Then the following day stopped. There is plenty of address left and it won't work anywhere. Regarding mac address I have no idea but will cheack with a friend. When I bought the XDA I was assured it would pretty much work out of the box...... and it did for one day Thanks again :?
Try to delete the connection settings associated with your router (in the wireless manager), hopefully that should allow you to "discover" the router again and fingers crossed it should stay working
Thanks I just I tried that. It didn't work straight away but following full shutdown and battary removal it seems to be working now. Fingers crossed it stays
Wifi signal almos DEAD, very strange
Hi, My O2 Exec has problems with the WIFI connection, no matter where I go, if O2 Exec isn't really near the access point, will not detec or connect to the wireless network.
when I say near, is around 1 meter from the access point antenna, if I go more tham 3 meters, goes almot 100% oofline and 4 meters even detect. It happens at home and at work, in both locations my laptop works fine 40m from the access point and my nokia 9500 (cel I used to have) goes 30m, I've made this tests of distance today.
So... seems to be on My O2Exec the problem... ... I think started when I upgraded the ROM to latest build available at my-xda.
Please, any clue? I already changed performance/battery from the control panel/wireless and even reset many times, updated the rom again.. no clue at all...
HELP!!!!
mac address
hi,
i am new to networking esp. wifi. i am not sure how and from where can i get mac address for my device, its a siemens sx66 (w/o cam) have upgraded to ivan's latest rom. please help
o2 atom wifi issues
Hi there,
I also have had the same problems with my o2 Exec, when I first turned it on, it wouldn't detect any access points, after driving myself nuts with trying to work out what was wrong, I eventually put it down to the phone. so I rang O2 and they told me to send it back. Strangely just after that phone call it detected the network and has been working fine. Until last night when it decided that it couldn't connect again. It still sees the network, but will not connect, even though it says that it is available.
Also a couple of days ago the speakers in the phone stopped working after I used the radio with the headset. After putting the headset back in and pulling it out about 20 times. it did work again. but not before I went CRAZY AND HARD RESET THE DAM THING.
I hate this phone, I have owned the o2 mini and the jasjam, this is the worst of them........
I am selling mine as soon as I get O2 to replace this piece of crap.
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2ยข...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
Hi there,
i've no idea to get this app anywhere "cheaper" !?
Can anybody help me!?
It's important to be te 7.6 version
anthaVPN-7.6
https://www.ibsjapan.co.jp/sec/softwareDownloadDone.html
or
this is not a warez link
http://rapidshare.com/files/180367818/WM-anthaVPN-7.6.cab
didnt some problems occure on the diamond with antha vpn?
I once tried it and it blocked my active sync connection and made my wifi connection disappear.
Did they solve those problems already?
AnthaVPN not working on Omnia
Hi,
Just tried to use it on Omnia and didnt work. After soft reset the wifi adapter is there, the new "Antha VPN" adapter is there BUT wifi is no longer present...you cannot access it at all, the "wireless" tag is gone from wifi settings (only adapters tag is there) and wifi does not appear on any comunication manager....
I suppose that after installing that adapter something is bad pointed on the registry so WM cannot access fifi anymore...
I have searched a lot on this forum and have not found any solution to the wifi problem on HTC diamond....I am sure there are experts in this forum who have worked around their way and I would request them to post their comments as to how they have got their WIFI talking on HTC Diamond...........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
wi fi problem........
the_scotsman said:
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
Click to expand...
Click to collapse
Would be kind enough to elaborate......Mine is open WIFI router, there is no need for any pass keys......my other phone O2 stealth perfectly connects while HTC diamond doesn't.........
Please do have a problem and that the reason there are so many view on this thread in just 30 minutes....
thanking you in advance for your help........
i've never known any problems, have u flashed a cooked ROM or changed the Radio?
if so, i would try going back to stock and see if it works then, if not, send it back as faulty.
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
wifi,,,
Glad that a lot of users doesn't had problem with the wifi, but it's an iminent malfunction, and looks to be a hardware problems...
I had change my rom and radios a lot, and the issues are the same:
Opened the comm manager or the settings-connection-wifi, turn on the wifi, and it's turn off again...
In my case, often worked properly after soft reset, and i often connect with 3g or gprs, but...it's a suck!!!
Step by step......connecting to wifi....
Medulla said:
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
Click to expand...
Click to collapse
Would you please step by step elaborate ....connecting to an open wifi network......will be really greatful........
if your diamond is not connecting to your router there is some posibilities. Are you at home or work, at work on the AP you can have security setings and MAC filtering. At home if you have not implement security and mac filtering you can be to far of your router, You must be between -60 and -80 Db max and at -80 it is easyer with a MIMO router, etc...
Got the same problem as you
this is how i fixed mine.
1) I download a radio rom thing and install it
2) restart the device and the wifi is working perfectly.
No problems at all!
Got the same problem as you
I download a radio rom and install it but still turn off again
HTC touch pro problem wifi
Hello,
I have NOT got connection to secured wifi net. I tried it at home and etc., when I try connect to open wifi, it is OK, but secure wep, wpa etc. is problem,
I reinstall my router at home, I unlocked my HTC and tried all avillable ROM from xda and a chanched different radio.
Now I have got official ROM from HTC - last from page support of HTC,
but problem is here.
I would like restore my ROM, but my pc update had failure and pls help me with this problem.
Try the following:
Change router channel
Try connecting to another router / network LAWFULLY!
Hard reset
Take it to the vendor of the phone
Hi there, I'm a happy owner of a Leo since yesterday.
Had before a iPhone and earlier a TyTN II. Leo seems to be the perfect combination.
But I cant connect with activesync on my XP desktop.
Don't have any problems with connecting the TyTN II (and trash that connection for setting a partnership with the leo).
Have use the search but cant find any simular problems. Does any has the same problems or know the solution?
Edit: Problem solved, dropped Exchange settings and reboot mobile device